From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/go7007/go7007-i2c.c | 210 ++++++++++++++++++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 drivers/media/usb/go7007/go7007-i2c.c (limited to 'drivers/media/usb/go7007/go7007-i2c.c') diff --git a/drivers/media/usb/go7007/go7007-i2c.c b/drivers/media/usb/go7007/go7007-i2c.c new file mode 100644 index 000000000..38339dd2f --- /dev/null +++ b/drivers/media/usb/go7007/go7007-i2c.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "go7007-priv.h" + +/********************* Driver for on-board I2C adapter *********************/ + +/* #define GO7007_I2C_DEBUG */ + +#define SPI_I2C_ADDR_BASE 0x1400 +#define STATUS_REG_ADDR (SPI_I2C_ADDR_BASE + 0x2) +#define I2C_CTRL_REG_ADDR (SPI_I2C_ADDR_BASE + 0x6) +#define I2C_DEV_UP_ADDR_REG_ADDR (SPI_I2C_ADDR_BASE + 0x7) +#define I2C_LO_ADDR_REG_ADDR (SPI_I2C_ADDR_BASE + 0x8) +#define I2C_DATA_REG_ADDR (SPI_I2C_ADDR_BASE + 0x9) +#define I2C_CLKFREQ_REG_ADDR (SPI_I2C_ADDR_BASE + 0xa) + +#define I2C_STATE_MASK 0x0007 +#define I2C_READ_READY_MASK 0x0008 + +/* There is only one I2C port on the TW2804 that feeds all four GO7007 VIPs + * on the Adlink PCI-MPG24, so access is shared between all of them. */ +static DEFINE_MUTEX(adlink_mpg24_i2c_lock); + +static int go7007_i2c_xfer(struct go7007 *go, u16 addr, int read, + u16 command, int flags, u8 *data) +{ + int i, ret = -EIO; + u16 val; + + if (go->status == STATUS_SHUTDOWN) + return -ENODEV; + +#ifdef GO7007_I2C_DEBUG + if (read) + dev_dbg(go->dev, "go7007-i2c: reading 0x%02x on 0x%02x\n", + command, addr); + else + dev_dbg(go->dev, + "go7007-i2c: writing 0x%02x to 0x%02x on 0x%02x\n", + *data, command, addr); +#endif + + mutex_lock(&go->hw_lock); + + if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) { + /* Bridge the I2C port on this GO7007 to the shared bus */ + mutex_lock(&adlink_mpg24_i2c_lock); + go7007_write_addr(go, 0x3c82, 0x0020); + } + + /* Wait for I2C adapter to be ready */ + for (i = 0; i < 10; ++i) { + if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0) + goto i2c_done; + if (!(val & I2C_STATE_MASK)) + break; + msleep(100); + } + if (i == 10) { + dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n"); + goto i2c_done; + } + + /* Set target register (command) */ + go7007_write_addr(go, I2C_CTRL_REG_ADDR, flags); + go7007_write_addr(go, I2C_LO_ADDR_REG_ADDR, command); + + /* If we're writing, send the data and target address and we're done */ + if (!read) { + go7007_write_addr(go, I2C_DATA_REG_ADDR, *data); + go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR, + (addr << 9) | (command >> 8)); + ret = 0; + goto i2c_done; + } + + /* Otherwise, we're reading. First clear i2c_rx_data_rdy. */ + if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0) + goto i2c_done; + + /* Send the target address plus read flag */ + go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR, + (addr << 9) | 0x0100 | (command >> 8)); + + /* Wait for i2c_rx_data_rdy */ + for (i = 0; i < 10; ++i) { + if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0) + goto i2c_done; + if (val & I2C_READ_READY_MASK) + break; + msleep(100); + } + if (i == 10) { + dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n"); + goto i2c_done; + } + + /* Retrieve the read byte */ + if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0) + goto i2c_done; + *data = val; + ret = 0; + +i2c_done: + if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) { + /* Isolate the I2C port on this GO7007 from the shared bus */ + go7007_write_addr(go, 0x3c82, 0x0000); + mutex_unlock(&adlink_mpg24_i2c_lock); + } + mutex_unlock(&go->hw_lock); + return ret; +} + +static int go7007_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct go7007 *go = i2c_get_adapdata(adapter); + + if (size != I2C_SMBUS_BYTE_DATA) + return -EIO; + return go7007_i2c_xfer(go, addr, read_write == I2C_SMBUS_READ, command, + flags & I2C_CLIENT_SCCB ? 0x10 : 0x00, &data->byte); +} + +/* VERY LIMITED I2C master xfer function -- only needed because the + * SMBus functions only support 8-bit commands and the SAA7135 uses + * 16-bit commands. The I2C interface on the GO7007, as limited as + * it is, does support this mode. */ + +static int go7007_i2c_master_xfer(struct i2c_adapter *adapter, + struct i2c_msg msgs[], int num) +{ + struct go7007 *go = i2c_get_adapdata(adapter); + int i; + + for (i = 0; i < num; ++i) { + /* We can only do two things here -- write three bytes, or + * write two bytes and read one byte. */ + if (msgs[i].len == 2) { + if (i + 1 == num || msgs[i].addr != msgs[i + 1].addr || + (msgs[i].flags & I2C_M_RD) || + !(msgs[i + 1].flags & I2C_M_RD) || + msgs[i + 1].len != 1) + return -EIO; + if (go7007_i2c_xfer(go, msgs[i].addr, 1, + (msgs[i].buf[0] << 8) | msgs[i].buf[1], + 0x01, &msgs[i + 1].buf[0]) < 0) + return -EIO; + ++i; + } else if (msgs[i].len == 3) { + if (msgs[i].flags & I2C_M_RD) + return -EIO; + if (msgs[i].len != 3) + return -EIO; + if (go7007_i2c_xfer(go, msgs[i].addr, 0, + (msgs[i].buf[0] << 8) | msgs[i].buf[1], + 0x01, &msgs[i].buf[2]) < 0) + return -EIO; + } else + return -EIO; + } + + return num; +} + +static u32 go7007_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_BYTE_DATA; +} + +static const struct i2c_algorithm go7007_algo = { + .smbus_xfer = go7007_smbus_xfer, + .master_xfer = go7007_i2c_master_xfer, + .functionality = go7007_functionality, +}; + +static struct i2c_adapter go7007_adap_templ = { + .owner = THIS_MODULE, + .name = "WIS GO7007SB", + .algo = &go7007_algo, +}; + +int go7007_i2c_init(struct go7007 *go) +{ + memcpy(&go->i2c_adapter, &go7007_adap_templ, + sizeof(go7007_adap_templ)); + go->i2c_adapter.dev.parent = go->dev; + i2c_set_adapdata(&go->i2c_adapter, go); + if (i2c_add_adapter(&go->i2c_adapter) < 0) { + dev_err(go->dev, + "go7007-i2c: error: i2c_add_adapter failed\n"); + return -1; + } + return 0; +} -- cgit v1.2.3