From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/go7007/s2250-board.c | 628 +++++++++++++++++++++++++++++++++ 1 file changed, 628 insertions(+) create mode 100644 drivers/media/usb/go7007/s2250-board.c (limited to 'drivers/media/usb/go7007/s2250-board.c') diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c new file mode 100644 index 000000000..29dfcc6d0 --- /dev/null +++ b/drivers/media/usb/go7007/s2250-board.c @@ -0,0 +1,628 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Sensoray Company Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "go7007-priv.h" + +MODULE_DESCRIPTION("Sensoray 2250/2251 i2c v4l2 subdev driver"); +MODULE_LICENSE("GPL v2"); + +/* + * Note: this board has two i2c devices: a vpx3226f and a tlv320aic23b. + * Due to the unusual way these are accessed on this device we do not + * reuse the i2c drivers, but instead they are implemented in this + * driver. It would be nice to improve on this, though. + */ + +#define TLV320_ADDRESS 0x34 +#define VPX322_ADDR_ANALOGCONTROL1 0x02 +#define VPX322_ADDR_BRIGHTNESS0 0x0127 +#define VPX322_ADDR_BRIGHTNESS1 0x0131 +#define VPX322_ADDR_CONTRAST0 0x0128 +#define VPX322_ADDR_CONTRAST1 0x0132 +#define VPX322_ADDR_HUE 0x00dc +#define VPX322_ADDR_SAT 0x0030 + +struct go7007_usb_board { + unsigned int flags; + struct go7007_board_info main_info; +}; + +struct go7007_usb { + struct go7007_usb_board *board; + struct mutex i2c_lock; + struct usb_device *usbdev; + struct urb *video_urbs[8]; + struct urb *audio_urbs[8]; + struct urb *intr_urb; +}; + +static unsigned char aud_regs[] = { + 0x1e, 0x00, + 0x00, 0x17, + 0x02, 0x17, + 0x04, 0xf9, + 0x06, 0xf9, + 0x08, 0x02, + 0x0a, 0x00, + 0x0c, 0x00, + 0x0a, 0x00, + 0x0c, 0x00, + 0x0e, 0x02, + 0x10, 0x00, + 0x12, 0x01, + 0x00, 0x00, +}; + + +static unsigned char vid_regs[] = { + 0xF2, 0x0f, + 0xAA, 0x00, + 0xF8, 0xff, + 0x00, 0x00, +}; + +static u16 vid_regs_fp[] = { + 0x028, 0x067, + 0x120, 0x016, + 0x121, 0xcF2, + 0x122, 0x0F2, + 0x123, 0x00c, + 0x124, 0x2d0, + 0x125, 0x2e0, + 0x126, 0x004, + 0x128, 0x1E0, + 0x12A, 0x016, + 0x12B, 0x0F2, + 0x12C, 0x0F2, + 0x12D, 0x00c, + 0x12E, 0x2d0, + 0x12F, 0x2e0, + 0x130, 0x004, + 0x132, 0x1E0, + 0x140, 0x060, + 0x153, 0x00C, + 0x154, 0x200, + 0x150, 0x801, + 0x000, 0x000 +}; + +/* PAL specific values */ +static u16 vid_regs_fp_pal[] = { + 0x120, 0x017, + 0x121, 0xd22, + 0x122, 0x122, + 0x12A, 0x017, + 0x12B, 0x122, + 0x12C, 0x122, + 0x140, 0x060, + 0x000, 0x000, +}; + +struct s2250 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id std; + int input; + int brightness; + int contrast; + int saturation; + int hue; + int reg12b_val; + int audio_input; + struct i2c_client *audio; +}; + +static inline struct s2250 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s2250, sd); +} + +/* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/ +static int go7007_usb_vendor_request(struct go7007 *go, u16 request, + u16 value, u16 index, void *transfer_buffer, int length, int in) +{ + struct go7007_usb *usb = go->hpi_context; + int timeout = 5000; + + if (in) { + return usb_control_msg(usb->usbdev, + usb_rcvctrlpipe(usb->usbdev, 0), request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + value, index, transfer_buffer, length, timeout); + } else { + return usb_control_msg(usb->usbdev, + usb_sndctrlpipe(usb->usbdev, 0), request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, transfer_buffer, length, timeout); + } +} +/* end from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/ + +static int write_reg(struct i2c_client *client, u8 reg, u8 value) +{ + struct go7007 *go = i2c_get_adapdata(client->adapter); + struct go7007_usb *usb; + int rc; + int dev_addr = client->addr << 1; /* firmware wants 8-bit address */ + u8 *buf; + + if (go == NULL) + return -ENODEV; + + if (go->status == STATUS_SHUTDOWN) + return -EBUSY; + + buf = kzalloc(16, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + usb = go->hpi_context; + if (mutex_lock_interruptible(&usb->i2c_lock) != 0) { + dev_info(&client->dev, "i2c lock failed\n"); + kfree(buf); + return -EINTR; + } + rc = go7007_usb_vendor_request(go, 0x55, dev_addr, + (reg<<8 | value), + buf, + 16, 1); + + mutex_unlock(&usb->i2c_lock); + kfree(buf); + return rc; +} + +static int write_reg_fp(struct i2c_client *client, u16 addr, u16 val) +{ + struct go7007 *go = i2c_get_adapdata(client->adapter); + struct go7007_usb *usb; + int rc; + u8 *buf; + struct s2250 *dec = i2c_get_clientdata(client); + + if (go == NULL) + return -ENODEV; + + if (go->status == STATUS_SHUTDOWN) + return -EBUSY; + + buf = kzalloc(16, GFP_KERNEL); + + if (buf == NULL) + return -ENOMEM; + + + + memset(buf, 0xcd, 6); + + usb = go->hpi_context; + if (mutex_lock_interruptible(&usb->i2c_lock) != 0) { + dev_info(&client->dev, "i2c lock failed\n"); + kfree(buf); + return -EINTR; + } + rc = go7007_usb_vendor_request(go, 0x57, addr, val, buf, 16, 1); + mutex_unlock(&usb->i2c_lock); + if (rc < 0) { + kfree(buf); + return rc; + } + + if (buf[0] == 0) { + unsigned int subaddr, val_read; + + subaddr = (buf[4] << 8) + buf[5]; + val_read = (buf[2] << 8) + buf[3]; + kfree(buf); + if (val_read != val) { + dev_info(&client->dev, "invalid fp write %x %x\n", + val_read, val); + return -EFAULT; + } + if (subaddr != addr) { + dev_info(&client->dev, "invalid fp write addr %x %x\n", + subaddr, addr); + return -EFAULT; + } + } else { + kfree(buf); + return -EFAULT; + } + + /* save last 12b value */ + if (addr == 0x12b) + dec->reg12b_val = val; + + return 0; +} + +static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) +{ + struct go7007 *go = i2c_get_adapdata(client->adapter); + struct go7007_usb *usb; + int rc; + u8 *buf; + + if (go == NULL) + return -ENODEV; + + if (go->status == STATUS_SHUTDOWN) + return -EBUSY; + + buf = kzalloc(16, GFP_KERNEL); + + if (buf == NULL) + return -ENOMEM; + + + + memset(buf, 0xcd, 6); + usb = go->hpi_context; + if (mutex_lock_interruptible(&usb->i2c_lock) != 0) { + dev_info(&client->dev, "i2c lock failed\n"); + kfree(buf); + return -EINTR; + } + rc = go7007_usb_vendor_request(go, 0x58, addr, 0, buf, 16, 1); + mutex_unlock(&usb->i2c_lock); + if (rc < 0) { + kfree(buf); + return rc; + } + + *val = (buf[0] << 8) | buf[1]; + kfree(buf); + + return 0; +} + + +static int write_regs(struct i2c_client *client, u8 *regs) +{ + int i; + + for (i = 0; !((regs[i] == 0x00) && (regs[i+1] == 0x00)); i += 2) { + if (write_reg(client, regs[i], regs[i+1]) < 0) { + dev_info(&client->dev, "failed\n"); + return -1; + } + } + return 0; +} + +static int write_regs_fp(struct i2c_client *client, u16 *regs) +{ + int i; + + for (i = 0; !((regs[i] == 0x00) && (regs[i+1] == 0x00)); i += 2) { + if (write_reg_fp(client, regs[i], regs[i+1]) < 0) { + dev_info(&client->dev, "failed fp\n"); + return -1; + } + } + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +static int s2250_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct s2250 *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int vidsys; + + vidsys = (state->std == V4L2_STD_NTSC) ? 0x01 : 0x00; + if (input == 0) { + /* composite */ + write_reg_fp(client, 0x20, 0x020 | vidsys); + write_reg_fp(client, 0x21, 0x662); + write_reg_fp(client, 0x140, 0x060); + } else if (input == 1) { + /* S-Video */ + write_reg_fp(client, 0x20, 0x040 | vidsys); + write_reg_fp(client, 0x21, 0x666); + write_reg_fp(client, 0x140, 0x060); + } else { + return -EINVAL; + } + state->input = input; + return 0; +} + +static int s2250_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct s2250 *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 vidsource; + + vidsource = (state->input == 1) ? 0x040 : 0x020; + if (norm & V4L2_STD_625_50) { + write_regs_fp(client, vid_regs_fp); + write_regs_fp(client, vid_regs_fp_pal); + write_reg_fp(client, 0x20, vidsource); + } else { + write_regs_fp(client, vid_regs_fp); + write_reg_fp(client, 0x20, vidsource | 1); + } + state->std = norm; + return 0; +} + +static int s2250_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct s2250 *state = container_of(ctrl->handler, struct s2250, hdl); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + u16 oldvalue; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + read_reg_fp(client, VPX322_ADDR_BRIGHTNESS0, &oldvalue); + write_reg_fp(client, VPX322_ADDR_BRIGHTNESS0, + ctrl->val | (oldvalue & ~0xff)); + read_reg_fp(client, VPX322_ADDR_BRIGHTNESS1, &oldvalue); + write_reg_fp(client, VPX322_ADDR_BRIGHTNESS1, + ctrl->val | (oldvalue & ~0xff)); + write_reg_fp(client, 0x140, 0x60); + break; + case V4L2_CID_CONTRAST: + read_reg_fp(client, VPX322_ADDR_CONTRAST0, &oldvalue); + write_reg_fp(client, VPX322_ADDR_CONTRAST0, + ctrl->val | (oldvalue & ~0x3f)); + read_reg_fp(client, VPX322_ADDR_CONTRAST1, &oldvalue); + write_reg_fp(client, VPX322_ADDR_CONTRAST1, + ctrl->val | (oldvalue & ~0x3f)); + write_reg_fp(client, 0x140, 0x60); + break; + case V4L2_CID_SATURATION: + write_reg_fp(client, VPX322_ADDR_SAT, ctrl->val); + break; + case V4L2_CID_HUE: + write_reg_fp(client, VPX322_ADDR_HUE, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int s2250_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt = &format->format; + struct s2250 *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (format->pad) + return -EINVAL; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + + if (fmt->height < 640) { + write_reg_fp(client, 0x12b, state->reg12b_val | 0x400); + write_reg_fp(client, 0x140, 0x060); + } else { + write_reg_fp(client, 0x12b, state->reg12b_val & ~0x400); + write_reg_fp(client, 0x140, 0x060); + } + return 0; +} + +static int s2250_s_audio_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct s2250 *state = to_state(sd); + + switch (input) { + case 0: + write_reg(state->audio, 0x08, 0x02); /* Line In */ + break; + case 1: + write_reg(state->audio, 0x08, 0x04); /* Mic */ + break; + case 2: + write_reg(state->audio, 0x08, 0x05); /* Mic Boost */ + break; + default: + return -EINVAL; + } + state->audio_input = input; + return 0; +} + + +static int s2250_log_status(struct v4l2_subdev *sd) +{ + struct s2250 *state = to_state(sd); + + v4l2_info(sd, "Standard: %s\n", state->std == V4L2_STD_NTSC ? "NTSC" : + state->std == V4L2_STD_PAL ? "PAL" : + state->std == V4L2_STD_SECAM ? "SECAM" : + "unknown"); + v4l2_info(sd, "Input: %s\n", state->input == 0 ? "Composite" : + state->input == 1 ? "S-video" : + "error"); + v4l2_info(sd, "Audio input: %s\n", state->audio_input == 0 ? "Line In" : + state->audio_input == 1 ? "Mic" : + state->audio_input == 2 ? "Mic Boost" : + "error"); + return v4l2_ctrl_subdev_log_status(sd); +} + +/* --------------------------------------------------------------------------*/ + +static const struct v4l2_ctrl_ops s2250_ctrl_ops = { + .s_ctrl = s2250_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops s2250_core_ops = { + .log_status = s2250_log_status, +}; + +static const struct v4l2_subdev_audio_ops s2250_audio_ops = { + .s_routing = s2250_s_audio_routing, +}; + +static const struct v4l2_subdev_video_ops s2250_video_ops = { + .s_std = s2250_s_std, + .s_routing = s2250_s_video_routing, +}; + +static const struct v4l2_subdev_pad_ops s2250_pad_ops = { + .set_fmt = s2250_set_fmt, +}; + +static const struct v4l2_subdev_ops s2250_ops = { + .core = &s2250_core_ops, + .audio = &s2250_audio_ops, + .video = &s2250_video_ops, + .pad = &s2250_pad_ops, +}; + +/* --------------------------------------------------------------------------*/ + +static int s2250_probe(struct i2c_client *client) +{ + struct i2c_client *audio; + struct i2c_adapter *adapter = client->adapter; + struct s2250 *state; + struct v4l2_subdev *sd; + u8 *data; + struct go7007 *go = i2c_get_adapdata(adapter); + struct go7007_usb *usb = go->hpi_context; + int err = -EIO; + + audio = i2c_new_dummy_device(adapter, TLV320_ADDRESS >> 1); + if (IS_ERR(audio)) + return PTR_ERR(audio); + + state = kzalloc(sizeof(struct s2250), GFP_KERNEL); + if (state == NULL) { + i2c_unregister_device(audio); + return -ENOMEM; + } + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &s2250_ops); + + v4l2_info(sd, "initializing %s at address 0x%x on %s\n", + "Sensoray 2250/2251", client->addr, client->adapter->name); + + v4l2_ctrl_handler_init(&state->hdl, 4); + v4l2_ctrl_new_std(&state->hdl, &s2250_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &s2250_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0x3f, 1, 0x32); + v4l2_ctrl_new_std(&state->hdl, &s2250_ctrl_ops, + V4L2_CID_SATURATION, 0, 4094, 1, 2070); + v4l2_ctrl_new_std(&state->hdl, &s2250_ctrl_ops, + V4L2_CID_HUE, -512, 511, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + err = state->hdl.error; + goto fail; + } + + state->std = V4L2_STD_NTSC; + state->brightness = 50; + state->contrast = 50; + state->saturation = 50; + state->hue = 0; + state->audio = audio; + + /* initialize the audio */ + if (write_regs(audio, aud_regs) < 0) { + dev_err(&client->dev, "error initializing audio\n"); + goto fail; + } + + if (write_regs(client, vid_regs) < 0) { + dev_err(&client->dev, "error initializing decoder\n"); + goto fail; + } + if (write_regs_fp(client, vid_regs_fp) < 0) { + dev_err(&client->dev, "error initializing decoder\n"); + goto fail; + } + /* set default channel */ + /* composite */ + write_reg_fp(client, 0x20, 0x020 | 1); + write_reg_fp(client, 0x21, 0x662); + write_reg_fp(client, 0x140, 0x060); + + /* set default audio input */ + state->audio_input = 0; + write_reg(client, 0x08, 0x02); /* Line In */ + + if (mutex_lock_interruptible(&usb->i2c_lock) == 0) { + data = kzalloc(16, GFP_KERNEL); + if (data != NULL) { + int rc = go7007_usb_vendor_request(go, 0x41, 0, 0, + data, 16, 1); + + if (rc > 0) { + u8 mask; + + data[0] = 0; + mask = 1<<5; + data[0] &= ~mask; + data[1] |= mask; + go7007_usb_vendor_request(go, 0x40, 0, + (data[1]<<8) + + data[1], + data, 16, 0); + } + kfree(data); + } + mutex_unlock(&usb->i2c_lock); + } + + v4l2_info(sd, "initialized successfully\n"); + return 0; + +fail: + i2c_unregister_device(audio); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; +} + +static void s2250_remove(struct i2c_client *client) +{ + struct s2250 *state = to_state(i2c_get_clientdata(client)); + + i2c_unregister_device(state->audio); + v4l2_device_unregister_subdev(&state->sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); +} + +static const struct i2c_device_id s2250_id[] = { + { "s2250", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, s2250_id); + +static struct i2c_driver s2250_driver = { + .driver = { + .name = "s2250", + }, + .probe_new = s2250_probe, + .remove = s2250_remove, + .id_table = s2250_id, +}; + +module_i2c_driver(s2250_driver); -- cgit v1.2.3