From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/pvrusb2/pvrusb2-devattr.c | 718 ++++++++++++++++++++++++++++ 1 file changed, 718 insertions(+) create mode 100644 drivers/media/usb/pvrusb2/pvrusb2-devattr.c (limited to 'drivers/media/usb/pvrusb2/pvrusb2-devattr.c') diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c new file mode 100644 index 000000000..d1b984ec7 --- /dev/null +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c @@ -0,0 +1,718 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * Copyright (C) 2007 Mike Isely + */ + +/* + +This source file should encompass ALL per-device type information for the +driver. To define a new device, add elements to the pvr2_device_table and +pvr2_device_desc structures. + +*/ + +#include "pvrusb2-devattr.h" +#include +#include +/* This is needed in order to pull in tuner type ids... */ +#include +#include +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +#include "pvrusb2-hdw-internal.h" +#include "lgdt330x.h" +#include "s5h1409.h" +#include "s5h1411.h" +#include "tda10048.h" +#include "tda18271.h" +#include "tda8290.h" +#include "tuner-simple.h" +#include "si2157.h" +#include "lgdt3306a.h" +#include "si2168.h" +#endif + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 29xxx */ + +static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { + { .module_id = PVR2_CLIENT_ID_SAA7115 }, + { .module_id = PVR2_CLIENT_ID_MSP3400 }, + { .module_id = PVR2_CLIENT_ID_TUNER }, + { .module_id = PVR2_CLIENT_ID_DEMOD }, +}; + +#define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" +static const char *pvr2_fw1_names_29xxx[] = { + PVR2_FIRMWARE_29xxx, +}; + +static const struct pvr2_device_desc pvr2_device_29xxx = { + .description = "WinTV PVR USB2 Model 29xxx", + .shortname = "29xxx", + .client_table.lst = pvr2_cli_29xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx), + .fx2_firmware.lst = pvr2_fw1_names_29xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_29XXX, +}; + + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 24xxx */ + +static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, + { .module_id = PVR2_CLIENT_ID_TUNER }, + { .module_id = PVR2_CLIENT_ID_WM8775 }, + { .module_id = PVR2_CLIENT_ID_DEMOD }, +}; + +#define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" +static const char *pvr2_fw1_names_24xxx[] = { + PVR2_FIRMWARE_24xxx, +}; + +static const struct pvr2_device_desc pvr2_device_24xxx = { + .description = "WinTV PVR USB2 Model 24xxx", + .shortname = "24xxx", + .client_table.lst = pvr2_cli_24xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx), + .fx2_firmware.lst = pvr2_fw1_names_24xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), + .flag_has_cx25840 = !0, + .flag_has_wm8775 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_24XXX, +}; + + + +/*------------------------------------------------------------------------*/ +/* GOTVIEW USB2.0 DVD2 */ + +static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, + { .module_id = PVR2_CLIENT_ID_TUNER }, + { .module_id = PVR2_CLIENT_ID_DEMOD }, +}; + +static const struct pvr2_device_desc pvr2_device_gotview_2 = { + .description = "Gotview USB 2.0 DVD 2", + .shortname = "gv2", + .client_table.lst = pvr2_cli_gotview_2, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), + .flag_has_cx25840 = !0, + .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, +}; + + + +/*------------------------------------------------------------------------*/ +/* GOTVIEW USB2.0 DVD Deluxe */ + +/* (same module list as gotview_2) */ + +static const struct pvr2_device_desc pvr2_device_gotview_2d = { + .description = "Gotview USB 2.0 DVD Deluxe", + .shortname = "gv2d", + .client_table.lst = pvr2_cli_gotview_2, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), + .flag_has_cx25840 = !0, + .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, +}; + + + +/*------------------------------------------------------------------------*/ +/* Terratec Grabster AV400 */ + +static const struct pvr2_device_client_desc pvr2_cli_av400[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, +}; + +static const struct pvr2_device_desc pvr2_device_av400 = { + .description = "Terratec Grabster AV400", + .shortname = "av400", + .flag_is_experimental = 1, + .client_table.lst = pvr2_cli_av400, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), + .flag_has_cx25840 = !0, + .flag_has_analogtuner = 0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, +}; + + + +/*------------------------------------------------------------------------*/ +/* OnAir Creator */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct lgdt330x_config pvr2_lgdt3303_config = { + .demod_chip = LGDT3303, + .clock_polarity_flip = 1, +}; + +static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, + 0x0e, + &adap->channel.hdw->i2c_adap); + if (adap->fe[0]) + return 0; + + return -EIO; +} + +static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe[0], + &adap->channel.hdw->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF); + + return 0; +} + +static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = { + .frontend_attach = pvr2_lgdt3303_attach, + .tuner_attach = pvr2_lgh06xf_attach, +}; +#endif + +static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = { + { .module_id = PVR2_CLIENT_ID_SAA7115 }, + { .module_id = PVR2_CLIENT_ID_CS53L32A }, + { .module_id = PVR2_CLIENT_ID_TUNER }, +}; + +static const struct pvr2_device_desc pvr2_device_onair_creator = { + .description = "OnAir Creator Hybrid USB tuner", + .shortname = "oac", + .client_table.lst = pvr2_cli_onair_creator, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator), + .default_tuner_type = TUNER_LG_TDVS_H06XF, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_digital_requires_cx23416 = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, + .default_std_mask = V4L2_STD_NTSC_M, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_onair_creator_fe_props, +#endif +}; + + + +/*------------------------------------------------------------------------*/ +/* OnAir USB 2.0 */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct lgdt330x_config pvr2_lgdt3302_config = { + .demod_chip = LGDT3302, +}; + +static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, + 0x0e, + &adap->channel.hdw->i2c_adap); + if (adap->fe[0]) + return 0; + + return -EIO; +} + +static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe[0], + &adap->channel.hdw->i2c_adap, 0x61, + TUNER_PHILIPS_FCV1236D); + + return 0; +} + +static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { + .frontend_attach = pvr2_lgdt3302_attach, + .tuner_attach = pvr2_fcv1236d_attach, +}; +#endif + +static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = { + { .module_id = PVR2_CLIENT_ID_SAA7115 }, + { .module_id = PVR2_CLIENT_ID_CS53L32A }, + { .module_id = PVR2_CLIENT_ID_TUNER }, +}; + +static const struct pvr2_device_desc pvr2_device_onair_usb2 = { + .description = "OnAir USB2 Hybrid USB tuner", + .shortname = "oa2", + .client_table.lst = pvr2_cli_onair_usb2, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2), + .default_tuner_type = TUNER_PHILIPS_FCV1236D, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_digital_requires_cx23416 = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, + .default_std_mask = V4L2_STD_NTSC_M, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_onair_usb2_fe_props, +#endif +}; + + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 73xxx */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct tda10048_config hauppauge_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_50, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, +}; + +static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config hauppauge_tda18271_dvb_config = { + .std_map = &hauppauge_tda18271_dvbt_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe[0] = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe[0]) + return 0; + + return -EIO; +} + +static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(tda829x_attach, adap->fe[0], + &adap->channel.hdw->i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, adap->fe[0], 0x60, + &adap->channel.hdw->i2c_adap, + &hauppauge_tda18271_dvb_config); + + return 0; +} + +static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = { + .frontend_attach = pvr2_tda10048_attach, + .tuner_attach = pvr2_73xxx_tda18271_8295_attach, +}; +#endif + +static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, + { .module_id = PVR2_CLIENT_ID_TUNER, + .i2c_address_list = "\x42"}, +}; + +#define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" +static const char *pvr2_fw1_names_73xxx[] = { + PVR2_FIRMWARE_73xxx, +}; + +static const struct pvr2_device_desc pvr2_device_73xxx = { + .description = "WinTV HVR-1900 Model 73xxx", + .shortname = "73xxx", + .client_table.lst = pvr2_cli_73xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), + .fx2_firmware.lst = pvr2_fw1_names_73xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_fx2_16kb = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_ZILOG, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_73xxx_dvb_props, +#endif +}; + + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 75xxx */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct s5h1409_config pvr2_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 4000, + .inversion = S5H1409_INVERSION_ON, + .status_mode = S5H1409_DEMODLOCKING, +}; + +static struct s5h1411_config pvr2_s5h1411_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37, }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe[0] = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe[0]) + return 0; + + return -EIO; +} + +static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe[0] = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe[0]) + return 0; + + return -EIO; +} + +static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(tda829x_attach, adap->fe[0], + &adap->channel.hdw->i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, adap->fe[0], 0x60, + &adap->channel.hdw->i2c_adap, + &hauppauge_tda18271_config); + + return 0; +} + +static const struct pvr2_dvb_props pvr2_750xx_dvb_props = { + .frontend_attach = pvr2_s5h1409_attach, + .tuner_attach = pvr2_tda18271_8295_attach, +}; + +static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { + .frontend_attach = pvr2_s5h1411_attach, + .tuner_attach = pvr2_tda18271_8295_attach, +}; +#endif + +#define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" +static const char *pvr2_fw1_names_75xxx[] = { + PVR2_FIRMWARE_75xxx, +}; + +static const struct pvr2_device_desc pvr2_device_750xx = { + .description = "WinTV HVR-1950 Model 750xx", + .shortname = "750xx", + .client_table.lst = pvr2_cli_73xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), + .fx2_firmware.lst = pvr2_fw1_names_75xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_fx2_16kb = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_ZILOG, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_750xx_dvb_props, +#endif +}; + +static const struct pvr2_device_desc pvr2_device_751xx = { + .description = "WinTV HVR-1950 Model 751xx", + .shortname = "751xx", + .client_table.lst = pvr2_cli_73xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), + .fx2_firmware.lst = pvr2_fw1_names_75xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_fx2_16kb = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_ZILOG, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_751xx_dvb_props, +#endif +}; + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975 */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap); +static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap); +static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap); +static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap); + +static const struct pvr2_dvb_props pvr2_160000_dvb_props = { + .frontend_attach = pvr2_dual_fe_attach, + .tuner_attach = pvr2_si2157_attach, +}; + +static const struct pvr2_dvb_props pvr2_160111_dvb_props = { + .frontend_attach = pvr2_lgdt3306a_attach, + .tuner_attach = pvr2_si2157_attach, +}; + +static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap) +{ + struct si2157_config si2157_config = {}; + + si2157_config.inversion = 1; + si2157_config.fe = adap->fe[0]; + + adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177", + &adap->channel.hdw->i2c_adap, + 0x60, &si2157_config); + + if (!adap->i2c_client_tuner) + return -ENODEV; + + return 0; +} + +static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap) +{ + struct si2168_config si2168_config = {}; + struct i2c_adapter *adapter; + + pr_debug("%s()\n", __func__); + + si2168_config.fe = &adap->fe[1]; + si2168_config.i2c_adapter = &adapter; + si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/ + si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/ + si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/ + si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/ + + adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL, + &adap->channel.hdw->i2c_adap, + 0x64, &si2168_config); + + if (!adap->i2c_client_demod[1]) + return -ENODEV; + + return 0; +} + +static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap) +{ + struct lgdt3306a_config lgdt3306a_config; + struct i2c_adapter *adapter; + + pr_debug("%s()\n", __func__); + + lgdt3306a_config.fe = &adap->fe[0]; + lgdt3306a_config.i2c_adapter = &adapter; + lgdt3306a_config.deny_i2c_rptr = 1; + lgdt3306a_config.spectral_inversion = 1; + lgdt3306a_config.qam_if_khz = 4000; + lgdt3306a_config.vsb_if_khz = 3250; + lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL; + lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE; + lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW; + lgdt3306a_config.xtalMHz = 25; /* demod clock MHz; 24/25 supported */ + + adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL, + &adap->channel.hdw->i2c_adap, + 0x59, &lgdt3306a_config); + + if (!adap->i2c_client_demod[0]) + return -ENODEV; + + return 0; +} + +static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap) +{ + pr_debug("%s()\n", __func__); + + if (pvr2_lgdt3306a_attach(adap) != 0) + return -ENODEV; + + if (pvr2_si2168_attach(adap) != 0) { + dvb_module_release(adap->i2c_client_demod[0]); + return -ENODEV; + } + + return 0; +} +#endif + +#define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw" +static const char *pvr2_fw1_names_160xxx[] = { + PVR2_FIRMWARE_160xxx, +}; + +static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, +}; + +static const struct pvr2_device_desc pvr2_device_160000 = { + .description = "WinTV HVR-1975 Model 160000", + .shortname = "160000", + .client_table.lst = pvr2_cli_160xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), + .fx2_firmware.lst = pvr2_fw1_names_160xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), + .default_tuner_type = TUNER_ABSENT, + .flag_has_cx25840 = 1, + .flag_has_hauppauge_rom = 1, + .flag_has_analogtuner = 1, + .flag_has_composite = 1, + .flag_has_svideo = 1, + .flag_fx2_16kb = 1, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_ZILOG, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_160000_dvb_props, +#endif +}; + +static const struct pvr2_device_desc pvr2_device_160111 = { + .description = "WinTV HVR-1955 Model 160111", + .shortname = "160111", + .client_table.lst = pvr2_cli_160xxx, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), + .fx2_firmware.lst = pvr2_fw1_names_160xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), + .default_tuner_type = TUNER_ABSENT, + .flag_has_cx25840 = 1, + .flag_has_hauppauge_rom = 1, + .flag_has_analogtuner = 1, + .flag_has_composite = 1, + .flag_has_svideo = 1, + .flag_fx2_16kb = 1, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_ZILOG, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_160111_dvb_props, +#endif +}; + +/*------------------------------------------------------------------------*/ + +struct usb_device_id pvr2_device_table[] = { + { USB_DEVICE(0x2040, 0x2900), + .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, + { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ + .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, + { USB_DEVICE(0x2040, 0x2400), + .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, + { USB_DEVICE(0x1164, 0x0622), + .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, + { USB_DEVICE(0x1164, 0x0602), + .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, + { USB_DEVICE(0x11ba, 0x1003), + .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, + { USB_DEVICE(0x11ba, 0x1001), + .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, + { USB_DEVICE(0x2040, 0x7300), + .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, + { USB_DEVICE(0x2040, 0x7500), + .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, + { USB_DEVICE(0x2040, 0x7501), + .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, + { USB_DEVICE(0x0ccd, 0x0039), + .driver_info = (kernel_ulong_t)&pvr2_device_av400}, + { USB_DEVICE(0x2040, 0x7502), + .driver_info = (kernel_ulong_t)&pvr2_device_160111}, + { USB_DEVICE(0x2040, 0x7510), + .driver_info = (kernel_ulong_t)&pvr2_device_160000}, + { } +}; + +MODULE_DEVICE_TABLE(usb, pvr2_device_table); +MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); -- cgit v1.2.3