From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/pwc/pwc.h | 383 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 drivers/media/usb/pwc/pwc.h (limited to 'drivers/media/usb/pwc/pwc.h') diff --git a/drivers/media/usb/pwc/pwc.h b/drivers/media/usb/pwc/pwc.h new file mode 100644 index 000000000..b02a3c7b7 --- /dev/null +++ b/drivers/media/usb/pwc/pwc.h @@ -0,0 +1,383 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* (C) 1999-2003 Nemosoft Unv. + (C) 2004-2006 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to . + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + +*/ + +#ifndef PWC_H +#define PWC_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_USB_PWC_INPUT_EVDEV +#include +#endif +#include "pwc-dec1.h" +#include "pwc-dec23.h" + +/* Version block */ +#define PWC_VERSION "10.0.15" +#define PWC_NAME "pwc" +#define PFX PWC_NAME ": " + + +/* Trace certain actions in the driver */ +#define PWC_DEBUG_LEVEL_MODULE BIT(0) +#define PWC_DEBUG_LEVEL_PROBE BIT(1) +#define PWC_DEBUG_LEVEL_OPEN BIT(2) +#define PWC_DEBUG_LEVEL_READ BIT(3) +#define PWC_DEBUG_LEVEL_MEMORY BIT(4) +#define PWC_DEBUG_LEVEL_FLOW BIT(5) +#define PWC_DEBUG_LEVEL_SIZE BIT(6) +#define PWC_DEBUG_LEVEL_IOCTL BIT(7) +#define PWC_DEBUG_LEVEL_TRACE BIT(8) + +#define PWC_DEBUG_MODULE(fmt, args...) PWC_DEBUG(MODULE, fmt, ##args) +#define PWC_DEBUG_PROBE(fmt, args...) PWC_DEBUG(PROBE, fmt, ##args) +#define PWC_DEBUG_OPEN(fmt, args...) PWC_DEBUG(OPEN, fmt, ##args) +#define PWC_DEBUG_READ(fmt, args...) PWC_DEBUG(READ, fmt, ##args) +#define PWC_DEBUG_MEMORY(fmt, args...) PWC_DEBUG(MEMORY, fmt, ##args) +#define PWC_DEBUG_FLOW(fmt, args...) PWC_DEBUG(FLOW, fmt, ##args) +#define PWC_DEBUG_SIZE(fmt, args...) PWC_DEBUG(SIZE, fmt, ##args) +#define PWC_DEBUG_IOCTL(fmt, args...) PWC_DEBUG(IOCTL, fmt, ##args) +#define PWC_DEBUG_TRACE(fmt, args...) PWC_DEBUG(TRACE, fmt, ##args) + + +#ifdef CONFIG_USB_PWC_DEBUG + +#define PWC_DEBUG_LEVEL (PWC_DEBUG_LEVEL_MODULE) + +#define PWC_DEBUG(level, fmt, args...) do {\ + if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \ + printk(KERN_DEBUG PFX fmt, ##args); \ + } while (0) + +#define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args) +#define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args) +#define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args) +#define PWC_TRACE(fmt, args...) PWC_DEBUG(TRACE, fmt, ##args) + +#else /* if ! CONFIG_USB_PWC_DEBUG */ + +#define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args) +#define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args) +#define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args) +#define PWC_TRACE(fmt, args...) do { } while(0) +#define PWC_DEBUG(level, fmt, args...) do { } while(0) + +#define pwc_trace 0 + +#endif + +/* Defines for ToUCam cameras */ +#define TOUCAM_HEADER_SIZE 8 +#define TOUCAM_TRAILER_SIZE 4 + +#define FEATURE_MOTOR_PANTILT 0x0001 +#define FEATURE_CODEC1 0x0002 +#define FEATURE_CODEC2 0x0004 + +#define MAX_WIDTH 640 +#define MAX_HEIGHT 480 + +/* Ignore errors in the first N frames, to allow for startup delays */ +#define FRAME_LOWMARK 5 + +/* Size and number of buffers for the ISO pipe. */ +#define MAX_ISO_BUFS 3 +#define ISO_FRAMES_PER_DESC 10 +#define ISO_MAX_FRAME_SIZE 960 +#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) + +/* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */ +#define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE) + +/* Absolute minimum and maximum number of buffers available for mmap() */ +#define MIN_FRAMES 2 +#define MAX_FRAMES 16 + +/* Some macros to quickly find the type of a webcam */ +#define DEVICE_USE_CODEC1(x) ((x)<675) +#define DEVICE_USE_CODEC2(x) ((x)>=675 && (x)<700) +#define DEVICE_USE_CODEC3(x) ((x)>=700) +#define DEVICE_USE_CODEC23(x) ((x)>=675) + +/* Request types: video */ +#define SET_LUM_CTL 0x01 +#define GET_LUM_CTL 0x02 +#define SET_CHROM_CTL 0x03 +#define GET_CHROM_CTL 0x04 +#define SET_STATUS_CTL 0x05 +#define GET_STATUS_CTL 0x06 +#define SET_EP_STREAM_CTL 0x07 +#define GET_EP_STREAM_CTL 0x08 +#define GET_XX_CTL 0x09 +#define SET_XX_CTL 0x0A +#define GET_XY_CTL 0x0B +#define SET_XY_CTL 0x0C +#define SET_MPT_CTL 0x0D +#define GET_MPT_CTL 0x0E + +/* Selectors for the Luminance controls [GS]ET_LUM_CTL */ +#define AGC_MODE_FORMATTER 0x2000 +#define PRESET_AGC_FORMATTER 0x2100 +#define SHUTTER_MODE_FORMATTER 0x2200 +#define PRESET_SHUTTER_FORMATTER 0x2300 +#define PRESET_CONTOUR_FORMATTER 0x2400 +#define AUTO_CONTOUR_FORMATTER 0x2500 +#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 +#define CONTRAST_FORMATTER 0x2700 +#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 +#define FLICKERLESS_MODE_FORMATTER 0x2900 +#define AE_CONTROL_SPEED 0x2A00 +#define BRIGHTNESS_FORMATTER 0x2B00 +#define GAMMA_FORMATTER 0x2C00 + +/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ +#define WB_MODE_FORMATTER 0x1000 +#define AWB_CONTROL_SPEED_FORMATTER 0x1100 +#define AWB_CONTROL_DELAY_FORMATTER 0x1200 +#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 +#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 +#define COLOUR_MODE_FORMATTER 0x1500 +#define SATURATION_MODE_FORMATTER1 0x1600 +#define SATURATION_MODE_FORMATTER2 0x1700 + +/* Selectors for the Status controls [GS]ET_STATUS_CTL */ +#define SAVE_USER_DEFAULTS_FORMATTER 0x0200 +#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 +#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 +#define READ_AGC_FORMATTER 0x0500 +#define READ_SHUTTER_FORMATTER 0x0600 +#define READ_RED_GAIN_FORMATTER 0x0700 +#define READ_BLUE_GAIN_FORMATTER 0x0800 + +/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ +#define PT_RELATIVE_CONTROL_FORMATTER 0x01 +#define PT_RESET_CONTROL_FORMATTER 0x02 +#define PT_STATUS_FORMATTER 0x03 + +/* Enumeration of image sizes */ +#define PSZ_SQCIF 0x00 +#define PSZ_QSIF 0x01 +#define PSZ_QCIF 0x02 +#define PSZ_SIF 0x03 +#define PSZ_CIF 0x04 +#define PSZ_VGA 0x05 +#define PSZ_MAX 6 + +struct pwc_raw_frame { + __le16 type; /* type of the webcam */ + __le16 vbandlength; /* Size of 4 lines compressed (used by the + decompressor) */ + __u8 cmd[4]; /* the four byte of the command (in case of + nala, only the first 3 bytes is filled) */ + __u8 rawframe[]; /* frame_size = H / 4 * vbandlength */ +} __packed; + +/* intermediate buffers with raw data from the USB cam */ +struct pwc_frame_buf +{ + /* common v4l buffer stuff -- must be first */ + struct vb2_v4l2_buffer vb; + struct list_head list; + void *data; + int filled; /* number of bytes filled */ +}; + +struct pwc_device +{ + struct video_device vdev; + struct v4l2_device v4l2_dev; + + /* videobuf2 queue and queued buffers list */ + struct vb2_queue vb_queue; + struct list_head queued_bufs; + spinlock_t queued_bufs_lock; /* Protects queued_bufs */ + + /* If taking both locks vb_queue_lock must always be locked first! */ + struct mutex v4l2_lock; /* Protects everything else */ + struct mutex vb_queue_lock; /* Protects vb_queue and capt_file */ + + /* Pointer to our usb_device, will be NULL after unplug */ + struct usb_device *udev; /* Both mutexes most be hold when setting! */ + + /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ + int type; + int release; /* release number */ + int features; /* feature bits */ + + /*** Video data ***/ + int vendpoint; /* video isoc endpoint */ + int vcinterface; /* video control interface */ + int valternate; /* alternate interface needed */ + int vframes; /* frames-per-second */ + int pixfmt; /* pixelformat: V4L2_PIX_FMT_YUV420 or _PWCX */ + int vframe_count; /* received frames */ + int vmax_packet_size; /* USB maxpacket size */ + int vlast_packet_size; /* for frame synchronisation */ + int visoc_errors; /* number of contiguous ISOC errors */ + int vbandlength; /* compressed band length; 0 is uncompressed */ + char vsync; /* used by isoc handler */ + char vmirror; /* for ToUCaM series */ + char power_save; /* Do powersaving for this cam */ + + unsigned char cmd_buf[13]; + unsigned char *ctrl_buf; + + struct urb *urbs[MAX_ISO_BUFS]; + + /* + * Frame currently being filled, this only gets touched by the + * isoc urb complete handler, and by stream start / stop since + * start / stop touch it before / after starting / killing the urbs + * no locking is needed around this + */ + struct pwc_frame_buf *fill_buf; + + int frame_header_size, frame_trailer_size; + int frame_size; + int frame_total_size; /* including header & trailer */ + int drop_frames; + + union { /* private data for decompression engine */ + struct pwc_dec1_private dec1; + struct pwc_dec23_private dec23; + }; + + /* + * We have an 'image' and a 'view', where 'image' is the fixed-size img + * as delivered by the camera, and 'view' is the size requested by the + * program. The camera image is centered in this viewport, laced with + * a gray or black border. view_min <= image <= view <= view_max; + */ + int image_mask; /* supported sizes */ + int width, height; /* current resolution */ + +#ifdef CONFIG_USB_PWC_INPUT_EVDEV + struct input_dev *button_dev; /* webcam snapshot button input */ + char button_phys[64]; +#endif + + /* controls */ + struct v4l2_ctrl_handler ctrl_handler; + u16 saturation_fmt; + struct v4l2_ctrl *brightness; + struct v4l2_ctrl *contrast; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *gamma; + struct { + /* awb / red-blue balance cluster */ + struct v4l2_ctrl *auto_white_balance; + struct v4l2_ctrl *red_balance; + struct v4l2_ctrl *blue_balance; + /* usb ctrl transfers are slow, so we cache things */ + int color_bal_valid; + unsigned long last_color_bal_update; /* In jiffies */ + s32 last_red_balance; + s32 last_blue_balance; + }; + struct { + /* autogain / gain cluster */ + struct v4l2_ctrl *autogain; + struct v4l2_ctrl *gain; + int gain_valid; + unsigned long last_gain_update; /* In jiffies */ + s32 last_gain; + }; + struct { + /* exposure_auto / exposure cluster */ + struct v4l2_ctrl *exposure_auto; + struct v4l2_ctrl *exposure; + int exposure_valid; + unsigned long last_exposure_update; /* In jiffies */ + s32 last_exposure; + }; + struct v4l2_ctrl *colorfx; + struct { + /* autocontour/contour cluster */ + struct v4l2_ctrl *autocontour; + struct v4l2_ctrl *contour; + }; + struct v4l2_ctrl *backlight; + struct v4l2_ctrl *flicker; + struct v4l2_ctrl *noise_reduction; + struct v4l2_ctrl *save_user; + struct v4l2_ctrl *restore_user; + struct v4l2_ctrl *restore_factory; + struct v4l2_ctrl *awb_speed; + struct v4l2_ctrl *awb_delay; + struct { + /* motor control cluster */ + struct v4l2_ctrl *motor_pan; + struct v4l2_ctrl *motor_tilt; + struct v4l2_ctrl *motor_pan_reset; + struct v4l2_ctrl *motor_tilt_reset; + }; + /* CODEC3 models have both gain and exposure controlled by autogain */ + struct v4l2_ctrl *autogain_expo_cluster[3]; +}; + +/* Global variables */ +#ifdef CONFIG_USB_PWC_DEBUG +extern int pwc_trace; +#endif + +/** Functions in pwc-misc.c */ +/* sizes in pixels */ +extern const int pwc_image_sizes[PSZ_MAX][2]; + +int pwc_get_size(struct pwc_device *pdev, int width, int height); +void pwc_construct(struct pwc_device *pdev); + +/** Functions in pwc-ctrl.c */ +/* Request a certain video mode. Returns < 0 if not possible */ +extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, + int pixfmt, int frames, int *compression, int send_to_cam); +extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size); +extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value); +extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor); +extern int send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen); + +/* Control get / set helpers */ +int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data); +int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data); +int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data); +#define pwc_set_s8_ctrl pwc_set_u8_ctrl +int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *dat); +int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data); +int pwc_button_ctrl(struct pwc_device *pdev, u16 value); +int pwc_init_controls(struct pwc_device *pdev); + +/* Power down or up the camera; not supported by all models */ +extern void pwc_camera_power(struct pwc_device *pdev, int power); + +extern const struct v4l2_ioctl_ops pwc_ioctl_ops; + +/** pwc-uncompress.c */ +/* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ +int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf); + +#endif -- cgit v1.2.3