From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/da9150-core.c | 523 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 523 insertions(+) create mode 100644 drivers/mfd/da9150-core.c (limited to 'drivers/mfd/da9150-core.c') diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c new file mode 100644 index 000000000..d2c954103 --- /dev/null +++ b/drivers/mfd/da9150-core.c @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DA9150 Core MFD Driver + * + * Copyright (c) 2014 Dialog Semiconductor + * + * Author: Adam Thomson + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Raw device access, used for QIF */ +static int da9150_i2c_read_device(struct i2c_client *client, u8 addr, int count, + u8 *buf) +{ + struct i2c_msg xfer; + int ret; + + /* + * Read is split into two transfers as device expects STOP/START rather + * than repeated start to carry out this kind of access. + */ + + /* Write address */ + xfer.addr = client->addr; + xfer.flags = 0; + xfer.len = 1; + xfer.buf = &addr; + + ret = i2c_transfer(client->adapter, &xfer, 1); + if (ret != 1) { + if (ret < 0) + return ret; + else + return -EIO; + } + + /* Read data */ + xfer.addr = client->addr; + xfer.flags = I2C_M_RD; + xfer.len = count; + xfer.buf = buf; + + ret = i2c_transfer(client->adapter, &xfer, 1); + if (ret == 1) + return 0; + else if (ret < 0) + return ret; + else + return -EIO; +} + +static int da9150_i2c_write_device(struct i2c_client *client, u8 addr, + int count, const u8 *buf) +{ + struct i2c_msg xfer; + u8 *reg_data; + int ret; + + reg_data = kzalloc(1 + count, GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data[0] = addr; + memcpy(®_data[1], buf, count); + + /* Write address & data */ + xfer.addr = client->addr; + xfer.flags = 0; + xfer.len = 1 + count; + xfer.buf = reg_data; + + ret = i2c_transfer(client->adapter, &xfer, 1); + kfree(reg_data); + if (ret == 1) + return 0; + else if (ret < 0) + return ret; + else + return -EIO; +} + +static bool da9150_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case DA9150_PAGE_CON: + case DA9150_STATUS_A: + case DA9150_STATUS_B: + case DA9150_STATUS_C: + case DA9150_STATUS_D: + case DA9150_STATUS_E: + case DA9150_STATUS_F: + case DA9150_STATUS_G: + case DA9150_STATUS_H: + case DA9150_STATUS_I: + case DA9150_STATUS_J: + case DA9150_STATUS_K: + case DA9150_STATUS_L: + case DA9150_STATUS_N: + case DA9150_FAULT_LOG_A: + case DA9150_FAULT_LOG_B: + case DA9150_EVENT_E: + case DA9150_EVENT_F: + case DA9150_EVENT_G: + case DA9150_EVENT_H: + case DA9150_CONTROL_B: + case DA9150_CONTROL_C: + case DA9150_GPADC_MAN: + case DA9150_GPADC_RES_A: + case DA9150_GPADC_RES_B: + case DA9150_ADETVB_CFG_C: + case DA9150_ADETD_STAT: + case DA9150_ADET_CMPSTAT: + case DA9150_ADET_CTRL_A: + case DA9150_PPR_TCTR_B: + case DA9150_COREBTLD_STAT_A: + case DA9150_CORE_DATA_A: + case DA9150_CORE_DATA_B: + case DA9150_CORE_DATA_C: + case DA9150_CORE_DATA_D: + case DA9150_CORE2WIRE_STAT_A: + case DA9150_FW_CTRL_C: + case DA9150_FG_CTRL_B: + case DA9150_FW_CTRL_B: + case DA9150_GPADC_CMAN: + case DA9150_GPADC_CRES_A: + case DA9150_GPADC_CRES_B: + case DA9150_CC_ICHG_RES_A: + case DA9150_CC_ICHG_RES_B: + case DA9150_CC_IAVG_RES_A: + case DA9150_CC_IAVG_RES_B: + case DA9150_TAUX_CTRL_A: + case DA9150_TAUX_VALUE_H: + case DA9150_TAUX_VALUE_L: + case DA9150_TBAT_RES_A: + case DA9150_TBAT_RES_B: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg da9150_range_cfg[] = { + { + .range_min = DA9150_PAGE_CON, + .range_max = DA9150_TBAT_RES_B, + .selector_reg = DA9150_PAGE_CON, + .selector_mask = DA9150_I2C_PAGE_MASK, + .selector_shift = DA9150_I2C_PAGE_SHIFT, + .window_start = 0, + .window_len = 256, + }, +}; + +static const struct regmap_config da9150_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .ranges = da9150_range_cfg, + .num_ranges = ARRAY_SIZE(da9150_range_cfg), + .max_register = DA9150_TBAT_RES_B, + + .cache_type = REGCACHE_RBTREE, + + .volatile_reg = da9150_volatile_reg, +}; + +void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf) +{ + int ret; + + ret = da9150_i2c_read_device(da9150->core_qif, addr, count, buf); + if (ret < 0) + dev_err(da9150->dev, "Failed to read from QIF 0x%x: %d\n", + addr, ret); +} +EXPORT_SYMBOL_GPL(da9150_read_qif); + +void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf) +{ + int ret; + + ret = da9150_i2c_write_device(da9150->core_qif, addr, count, buf); + if (ret < 0) + dev_err(da9150->dev, "Failed to write to QIF 0x%x: %d\n", + addr, ret); +} +EXPORT_SYMBOL_GPL(da9150_write_qif); + +u8 da9150_reg_read(struct da9150 *da9150, u16 reg) +{ + int val, ret; + + ret = regmap_read(da9150->regmap, reg, &val); + if (ret) + dev_err(da9150->dev, "Failed to read from reg 0x%x: %d\n", + reg, ret); + + return (u8) val; +} +EXPORT_SYMBOL_GPL(da9150_reg_read); + +void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val) +{ + int ret; + + ret = regmap_write(da9150->regmap, reg, val); + if (ret) + dev_err(da9150->dev, "Failed to write to reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_reg_write); + +void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val) +{ + int ret; + + ret = regmap_update_bits(da9150->regmap, reg, mask, val); + if (ret) + dev_err(da9150->dev, "Failed to set bits in reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_set_bits); + +void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf) +{ + int ret; + + ret = regmap_bulk_read(da9150->regmap, reg, buf, count); + if (ret) + dev_err(da9150->dev, "Failed to bulk read from reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_bulk_read); + +void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf) +{ + int ret; + + ret = regmap_raw_write(da9150->regmap, reg, buf, count); + if (ret) + dev_err(da9150->dev, "Failed to bulk write to reg 0x%x %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_bulk_write); + +static const struct regmap_irq da9150_irqs[] = { + [DA9150_IRQ_VBUS] = { + .reg_offset = 0, + .mask = DA9150_E_VBUS_MASK, + }, + [DA9150_IRQ_CHG] = { + .reg_offset = 0, + .mask = DA9150_E_CHG_MASK, + }, + [DA9150_IRQ_TCLASS] = { + .reg_offset = 0, + .mask = DA9150_E_TCLASS_MASK, + }, + [DA9150_IRQ_TJUNC] = { + .reg_offset = 0, + .mask = DA9150_E_TJUNC_MASK, + }, + [DA9150_IRQ_VFAULT] = { + .reg_offset = 0, + .mask = DA9150_E_VFAULT_MASK, + }, + [DA9150_IRQ_CONF] = { + .reg_offset = 1, + .mask = DA9150_E_CONF_MASK, + }, + [DA9150_IRQ_DAT] = { + .reg_offset = 1, + .mask = DA9150_E_DAT_MASK, + }, + [DA9150_IRQ_DTYPE] = { + .reg_offset = 1, + .mask = DA9150_E_DTYPE_MASK, + }, + [DA9150_IRQ_ID] = { + .reg_offset = 1, + .mask = DA9150_E_ID_MASK, + }, + [DA9150_IRQ_ADP] = { + .reg_offset = 1, + .mask = DA9150_E_ADP_MASK, + }, + [DA9150_IRQ_SESS_END] = { + .reg_offset = 1, + .mask = DA9150_E_SESS_END_MASK, + }, + [DA9150_IRQ_SESS_VLD] = { + .reg_offset = 1, + .mask = DA9150_E_SESS_VLD_MASK, + }, + [DA9150_IRQ_FG] = { + .reg_offset = 2, + .mask = DA9150_E_FG_MASK, + }, + [DA9150_IRQ_GP] = { + .reg_offset = 2, + .mask = DA9150_E_GP_MASK, + }, + [DA9150_IRQ_TBAT] = { + .reg_offset = 2, + .mask = DA9150_E_TBAT_MASK, + }, + [DA9150_IRQ_GPIOA] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOA_MASK, + }, + [DA9150_IRQ_GPIOB] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOB_MASK, + }, + [DA9150_IRQ_GPIOC] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOC_MASK, + }, + [DA9150_IRQ_GPIOD] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOD_MASK, + }, + [DA9150_IRQ_GPADC] = { + .reg_offset = 2, + .mask = DA9150_E_GPADC_MASK, + }, + [DA9150_IRQ_WKUP] = { + .reg_offset = 3, + .mask = DA9150_E_WKUP_MASK, + }, +}; + +static const struct regmap_irq_chip da9150_regmap_irq_chip = { + .name = "da9150_irq", + .status_base = DA9150_EVENT_E, + .mask_base = DA9150_IRQ_MASK_E, + .ack_base = DA9150_EVENT_E, + .num_regs = DA9150_NUM_IRQ_REGS, + .irqs = da9150_irqs, + .num_irqs = ARRAY_SIZE(da9150_irqs), +}; + +static const struct resource da9150_gpadc_resources[] = { + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_GPADC, "GPADC"), +}; + +static const struct resource da9150_charger_resources[] = { + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_CHG, "CHG_STATUS"), + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_TJUNC, "CHG_TJUNC"), + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VFAULT, "CHG_VFAULT"), + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VBUS, "CHG_VBUS"), +}; + +static const struct resource da9150_fg_resources[] = { + DEFINE_RES_IRQ_NAMED(DA9150_IRQ_FG, "FG"), +}; + +enum da9150_dev_idx { + DA9150_GPADC_IDX = 0, + DA9150_CHARGER_IDX, + DA9150_FG_IDX, +}; + +static struct mfd_cell da9150_devs[] = { + [DA9150_GPADC_IDX] = { + .name = "da9150-gpadc", + .of_compatible = "dlg,da9150-gpadc", + .resources = da9150_gpadc_resources, + .num_resources = ARRAY_SIZE(da9150_gpadc_resources), + }, + [DA9150_CHARGER_IDX] = { + .name = "da9150-charger", + .of_compatible = "dlg,da9150-charger", + .resources = da9150_charger_resources, + .num_resources = ARRAY_SIZE(da9150_charger_resources), + }, + [DA9150_FG_IDX] = { + .name = "da9150-fuel-gauge", + .of_compatible = "dlg,da9150-fuel-gauge", + .resources = da9150_fg_resources, + .num_resources = ARRAY_SIZE(da9150_fg_resources), + }, +}; + +static int da9150_probe(struct i2c_client *client) +{ + struct da9150 *da9150; + struct da9150_pdata *pdata = dev_get_platdata(&client->dev); + int qif_addr; + int ret; + + da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL); + if (!da9150) + return -ENOMEM; + + da9150->dev = &client->dev; + da9150->irq = client->irq; + i2c_set_clientdata(client, da9150); + + da9150->regmap = devm_regmap_init_i2c(client, &da9150_regmap_config); + if (IS_ERR(da9150->regmap)) { + ret = PTR_ERR(da9150->regmap); + dev_err(da9150->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + /* Setup secondary I2C interface for QIF access */ + qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A); + qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1; + qif_addr |= DA9150_QIF_I2C_ADDR_LSB; + da9150->core_qif = i2c_new_dummy_device(client->adapter, qif_addr); + if (IS_ERR(da9150->core_qif)) { + dev_err(da9150->dev, "Failed to attach QIF client\n"); + return PTR_ERR(da9150->core_qif); + } + + i2c_set_clientdata(da9150->core_qif, da9150); + + if (pdata) { + da9150->irq_base = pdata->irq_base; + + da9150_devs[DA9150_FG_IDX].platform_data = pdata->fg_pdata; + da9150_devs[DA9150_FG_IDX].pdata_size = + sizeof(struct da9150_fg_pdata); + } else { + da9150->irq_base = -1; + } + + ret = regmap_add_irq_chip(da9150->regmap, da9150->irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + da9150->irq_base, &da9150_regmap_irq_chip, + &da9150->regmap_irq_data); + if (ret) { + dev_err(da9150->dev, "Failed to add regmap irq chip: %d\n", + ret); + goto regmap_irq_fail; + } + + + da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data); + + enable_irq_wake(da9150->irq); + + ret = mfd_add_devices(da9150->dev, -1, da9150_devs, + ARRAY_SIZE(da9150_devs), NULL, + da9150->irq_base, NULL); + if (ret) { + dev_err(da9150->dev, "Failed to add child devices: %d\n", ret); + goto mfd_fail; + } + + return 0; + +mfd_fail: + regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); +regmap_irq_fail: + i2c_unregister_device(da9150->core_qif); + + return ret; +} + +static void da9150_remove(struct i2c_client *client) +{ + struct da9150 *da9150 = i2c_get_clientdata(client); + + regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); + mfd_remove_devices(da9150->dev); + i2c_unregister_device(da9150->core_qif); +} + +static void da9150_shutdown(struct i2c_client *client) +{ + struct da9150 *da9150 = i2c_get_clientdata(client); + + /* Make sure we have a wakup source for the device */ + da9150_set_bits(da9150, DA9150_CONFIG_D, + DA9150_WKUP_PM_EN_MASK, + DA9150_WKUP_PM_EN_MASK); + + /* Set device to DISABLED mode */ + da9150_set_bits(da9150, DA9150_CONTROL_C, + DA9150_DISABLE_MASK, DA9150_DISABLE_MASK); +} + +static const struct i2c_device_id da9150_i2c_id[] = { + { "da9150", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, da9150_i2c_id); + +static const struct of_device_id da9150_of_match[] = { + { .compatible = "dlg,da9150", }, + { } +}; +MODULE_DEVICE_TABLE(of, da9150_of_match); + +static struct i2c_driver da9150_driver = { + .driver = { + .name = "da9150", + .of_match_table = da9150_of_match, + }, + .probe_new = da9150_probe, + .remove = da9150_remove, + .shutdown = da9150_shutdown, + .id_table = da9150_i2c_id, +}; + +module_i2c_driver(da9150_driver); + +MODULE_DESCRIPTION("MFD Core Driver for DA9150"); +MODULE_AUTHOR("Adam Thomson "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3