From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/intel-m10-bmc.c | 238 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 drivers/mfd/intel-m10-bmc.c (limited to 'drivers/mfd/intel-m10-bmc.c') diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c new file mode 100644 index 000000000..7e3319e5b --- /dev/null +++ b/drivers/mfd/intel-m10-bmc.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel MAX 10 Board Management Controller chip + * + * Copyright (C) 2018-2020 Intel Corporation. All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +enum m10bmc_type { + M10_N3000, + M10_D5005, + M10_N5010, +}; + +static struct mfd_cell m10bmc_d5005_subdevs[] = { + { .name = "d5005bmc-hwmon" }, + { .name = "d5005bmc-sec-update" } +}; + +static struct mfd_cell m10bmc_pacn3000_subdevs[] = { + { .name = "n3000bmc-hwmon" }, + { .name = "n3000bmc-retimer" }, + { .name = "n3000bmc-sec-update" }, +}; + +static struct mfd_cell m10bmc_n5010_subdevs[] = { + { .name = "n5010bmc-hwmon" }, +}; + +static const struct regmap_range m10bmc_regmap_range[] = { + regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER), + regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END), + regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END), +}; + +static const struct regmap_access_table m10bmc_access_table = { + .yes_ranges = m10bmc_regmap_range, + .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range), +}; + +static struct regmap_config intel_m10bmc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .wr_table = &m10bmc_access_table, + .rd_table = &m10bmc_access_table, + .max_register = M10BMC_MEM_END, +}; + +static ssize_t bmc_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct intel_m10bmc *ddata = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val); + if (ret) + return ret; + + return sprintf(buf, "0x%x\n", val); +} +static DEVICE_ATTR_RO(bmc_version); + +static ssize_t bmcfw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct intel_m10bmc *ddata = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val); + if (ret) + return ret; + + return sprintf(buf, "0x%x\n", val); +} +static DEVICE_ATTR_RO(bmcfw_version); + +static ssize_t mac_address_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct intel_m10bmc *max10 = dev_get_drvdata(dev); + unsigned int macaddr_low, macaddr_high; + int ret; + + ret = m10bmc_sys_read(max10, M10BMC_MAC_LOW, &macaddr_low); + if (ret) + return ret; + + ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high); + if (ret) + return ret; + + return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n", + (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low), + (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low), + (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low), + (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low), + (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high), + (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high)); +} +static DEVICE_ATTR_RO(mac_address); + +static ssize_t mac_count_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct intel_m10bmc *max10 = dev_get_drvdata(dev); + unsigned int macaddr_high; + int ret; + + ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high); + if (ret) + return ret; + + return sysfs_emit(buf, "%u\n", + (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high)); +} +static DEVICE_ATTR_RO(mac_count); + +static struct attribute *m10bmc_attrs[] = { + &dev_attr_bmc_version.attr, + &dev_attr_bmcfw_version.attr, + &dev_attr_mac_address.attr, + &dev_attr_mac_count.attr, + NULL, +}; +ATTRIBUTE_GROUPS(m10bmc); + +static int check_m10bmc_version(struct intel_m10bmc *ddata) +{ + unsigned int v; + int ret; + + /* + * This check is to filter out the very old legacy BMC versions. In the + * old BMC chips, the BMC version info is stored in the old version + * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have + * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC + * chips that the driver supports, the value of this register should be + * M10BMC_VER_LEGACY_INVALID. + */ + ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v); + if (ret) + return -ENODEV; + + if (v != M10BMC_VER_LEGACY_INVALID) { + dev_err(ddata->dev, "bad version M10BMC detected\n"); + return -ENODEV; + } + + return 0; +} + +static int intel_m10_bmc_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct device *dev = &spi->dev; + struct mfd_cell *cells; + struct intel_m10bmc *ddata; + int ret, n_cell; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->dev = dev; + + ddata->regmap = + devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config); + if (IS_ERR(ddata->regmap)) { + ret = PTR_ERR(ddata->regmap); + dev_err(dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + + spi_set_drvdata(spi, ddata); + + ret = check_m10bmc_version(ddata); + if (ret) { + dev_err(dev, "Failed to identify m10bmc hardware\n"); + return ret; + } + + switch (id->driver_data) { + case M10_N3000: + cells = m10bmc_pacn3000_subdevs; + n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs); + break; + case M10_D5005: + cells = m10bmc_d5005_subdevs; + n_cell = ARRAY_SIZE(m10bmc_d5005_subdevs); + break; + case M10_N5010: + cells = m10bmc_n5010_subdevs; + n_cell = ARRAY_SIZE(m10bmc_n5010_subdevs); + break; + default: + return -ENODEV; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell, + NULL, 0, NULL); + if (ret) + dev_err(dev, "Failed to register sub-devices: %d\n", ret); + + return ret; +} + +static const struct spi_device_id m10bmc_spi_id[] = { + { "m10-n3000", M10_N3000 }, + { "m10-d5005", M10_D5005 }, + { "m10-n5010", M10_N5010 }, + { } +}; +MODULE_DEVICE_TABLE(spi, m10bmc_spi_id); + +static struct spi_driver intel_m10bmc_spi_driver = { + .driver = { + .name = "intel-m10-bmc", + .dev_groups = m10bmc_groups, + }, + .probe = intel_m10_bmc_spi_probe, + .id_table = m10bmc_spi_id, +}; +module_spi_driver(intel_m10bmc_spi_driver); + +MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver"); +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:intel-m10-bmc"); -- cgit v1.2.3