From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/ocelot-spi.c | 300 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 300 insertions(+) create mode 100644 drivers/mfd/ocelot-spi.c (limited to 'drivers/mfd/ocelot-spi.c') diff --git a/drivers/mfd/ocelot-spi.c b/drivers/mfd/ocelot-spi.c new file mode 100644 index 000000000..2ecd271de --- /dev/null +++ b/drivers/mfd/ocelot-spi.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * SPI core driver for the Ocelot chip family. + * + * This driver will handle everything necessary to allow for communication over + * SPI to the VSC7511, VSC7512, VSC7513 and VSC7514 chips. The main functions + * are to prepare the chip's SPI interface for a specific bus speed, and a host + * processor's endianness. This will create and distribute regmaps for any + * children. + * + * Copyright 2021-2022 Innovative Advantage Inc. + * + * Author: Colin Foster + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ocelot.h" + +#define REG_DEV_CPUORG_IF_CTRL 0x0000 +#define REG_DEV_CPUORG_IF_CFGSTAT 0x0004 + +#define CFGSTAT_IF_NUM_VCORE (0 << 24) +#define CFGSTAT_IF_NUM_VRAP (1 << 24) +#define CFGSTAT_IF_NUM_SI (2 << 24) +#define CFGSTAT_IF_NUM_MIIM (3 << 24) + +#define VSC7512_DEVCPU_ORG_RES_START 0x71000000 +#define VSC7512_DEVCPU_ORG_RES_SIZE 0x38 + +#define VSC7512_CHIP_REGS_RES_START 0x71070000 +#define VSC7512_CHIP_REGS_RES_SIZE 0x14 + +static const struct resource vsc7512_dev_cpuorg_resource = + DEFINE_RES_REG_NAMED(VSC7512_DEVCPU_ORG_RES_START, + VSC7512_DEVCPU_ORG_RES_SIZE, + "devcpu_org"); + +static const struct resource vsc7512_gcb_resource = + DEFINE_RES_REG_NAMED(VSC7512_CHIP_REGS_RES_START, + VSC7512_CHIP_REGS_RES_SIZE, + "devcpu_gcb_chip_regs"); + +static int ocelot_spi_initialize(struct device *dev) +{ + struct ocelot_ddata *ddata = dev_get_drvdata(dev); + u32 val, check; + int err; + + val = OCELOT_SPI_BYTE_ORDER; + + /* + * The SPI address must be big-endian, but we want the payload to match + * our CPU. These are two bits (0 and 1) but they're repeated such that + * the write from any configuration will be valid. The four + * configurations are: + * + * 0b00: little-endian, MSB first + * | 111111 | 22221111 | 33222222 | + * | 76543210 | 54321098 | 32109876 | 10987654 | + * + * 0b01: big-endian, MSB first + * | 33222222 | 22221111 | 111111 | | + * | 10987654 | 32109876 | 54321098 | 76543210 | + * + * 0b10: little-endian, LSB first + * | 111111 | 11112222 | 22222233 | + * | 01234567 | 89012345 | 67890123 | 45678901 | + * + * 0b11: big-endian, LSB first + * | 22222233 | 11112222 | 111111 | | + * | 45678901 | 67890123 | 89012345 | 01234567 | + */ + err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CTRL, val); + if (err) + return err; + + /* + * Apply the number of padding bytes between a read request and the data + * payload. Some registers have access times of up to 1us, so if the + * first payload bit is shifted out too quickly, the read will fail. + */ + val = ddata->spi_padding_bytes; + err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, val); + if (err) + return err; + + /* + * After we write the interface configuration, read it back here. This + * will verify several different things. The first is that the number of + * padding bytes actually got written correctly. These are found in bits + * 0:3. + * + * The second is that bit 16 is cleared. Bit 16 is IF_CFGSTAT:IF_STAT, + * and will be set if the register access is too fast. This would be in + * the condition that the number of padding bytes is insufficient for + * the SPI bus frequency. + * + * The last check is for bits 31:24, which define the interface by which + * the registers are being accessed. Since we're accessing them via the + * serial interface, it must return IF_NUM_SI. + */ + check = val | CFGSTAT_IF_NUM_SI; + + err = regmap_read(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, &val); + if (err) + return err; + + if (check != val) + return -ENODEV; + + return 0; +} + +static const struct regmap_config ocelot_spi_regmap_config = { + .reg_bits = 24, + .reg_stride = 4, + .reg_downshift = 2, + .val_bits = 32, + + .write_flag_mask = 0x80, + + .use_single_write = true, + .can_multi_write = false, + + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_NATIVE, +}; + +static int ocelot_spi_regmap_bus_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct spi_transfer xfers[3] = {0}; + struct device *dev = context; + struct ocelot_ddata *ddata; + struct spi_device *spi; + struct spi_message msg; + unsigned int index = 0; + + ddata = dev_get_drvdata(dev); + spi = to_spi_device(dev); + + xfers[index].tx_buf = reg; + xfers[index].len = reg_size; + index++; + + if (ddata->spi_padding_bytes) { + xfers[index].len = ddata->spi_padding_bytes; + xfers[index].tx_buf = ddata->dummy_buf; + xfers[index].dummy_data = 1; + index++; + } + + xfers[index].rx_buf = val; + xfers[index].len = val_size; + index++; + + spi_message_init_with_transfers(&msg, xfers, index); + + return spi_sync(spi, &msg); +} + +static int ocelot_spi_regmap_bus_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + return spi_write(spi, data, count); +} + +static const struct regmap_bus ocelot_spi_regmap_bus = { + .write = ocelot_spi_regmap_bus_write, + .read = ocelot_spi_regmap_bus_read, +}; + +struct regmap *ocelot_spi_init_regmap(struct device *dev, const struct resource *res) +{ + struct regmap_config regmap_config; + + memcpy(®map_config, &ocelot_spi_regmap_config, sizeof(regmap_config)); + + regmap_config.name = res->name; + regmap_config.max_register = resource_size(res) - 1; + regmap_config.reg_base = res->start; + + return devm_regmap_init(dev, &ocelot_spi_regmap_bus, dev, ®map_config); +} +EXPORT_SYMBOL_NS(ocelot_spi_init_regmap, MFD_OCELOT_SPI); + +static int ocelot_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct ocelot_ddata *ddata; + struct regmap *r; + int err; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + spi_set_drvdata(spi, ddata); + + if (spi->max_speed_hz <= 500000) { + ddata->spi_padding_bytes = 0; + } else { + /* + * Calculation taken from the manual for IF_CFGSTAT:IF_CFG. + * Register access time is 1us, so we need to configure and send + * out enough padding bytes between the read request and data + * transmission that lasts at least 1 microsecond. + */ + ddata->spi_padding_bytes = 1 + (spi->max_speed_hz / HZ_PER_MHZ + 2) / 8; + + ddata->dummy_buf = devm_kzalloc(dev, ddata->spi_padding_bytes, GFP_KERNEL); + if (!ddata->dummy_buf) + return -ENOMEM; + } + + spi->bits_per_word = 8; + + err = spi_setup(spi); + if (err) + return dev_err_probe(&spi->dev, err, "Error performing SPI setup\n"); + + r = ocelot_spi_init_regmap(dev, &vsc7512_dev_cpuorg_resource); + if (IS_ERR(r)) + return PTR_ERR(r); + + ddata->cpuorg_regmap = r; + + r = ocelot_spi_init_regmap(dev, &vsc7512_gcb_resource); + if (IS_ERR(r)) + return PTR_ERR(r); + + ddata->gcb_regmap = r; + + /* + * The chip must be set up for SPI before it gets initialized and reset. + * This must be done before calling init, and after a chip reset is + * performed. + */ + err = ocelot_spi_initialize(dev); + if (err) + return dev_err_probe(dev, err, "Error initializing SPI bus\n"); + + err = ocelot_chip_reset(dev); + if (err) + return dev_err_probe(dev, err, "Error resetting device\n"); + + /* + * A chip reset will clear the SPI configuration, so it needs to be done + * again before we can access any registers. + */ + err = ocelot_spi_initialize(dev); + if (err) + return dev_err_probe(dev, err, "Error initializing SPI bus after reset\n"); + + err = ocelot_core_init(dev); + if (err) + return dev_err_probe(dev, err, "Error initializing Ocelot core\n"); + + return 0; +} + +static const struct spi_device_id ocelot_spi_ids[] = { + { "vsc7512", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ocelot_spi_ids); + +static const struct of_device_id ocelot_spi_of_match[] = { + { .compatible = "mscc,vsc7512" }, + { } +}; +MODULE_DEVICE_TABLE(of, ocelot_spi_of_match); + +static struct spi_driver ocelot_spi_driver = { + .driver = { + .name = "ocelot-soc", + .of_match_table = ocelot_spi_of_match, + }, + .id_table = ocelot_spi_ids, + .probe = ocelot_spi_probe, +}; +module_spi_driver(ocelot_spi_driver); + +MODULE_DESCRIPTION("SPI Controlled Ocelot Chip Driver"); +MODULE_AUTHOR("Colin Foster "); +MODULE_LICENSE("Dual MIT/GPL"); +MODULE_IMPORT_NS(MFD_OCELOT); -- cgit v1.2.3