From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/omap-usb-host.c | 877 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 877 insertions(+) create mode 100644 drivers/mfd/omap-usb-host.c (limited to 'drivers/mfd/omap-usb-host.c') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c new file mode 100644 index 000000000..787d2ae86 --- /dev/null +++ b/drivers/mfd/omap-usb-host.c @@ -0,0 +1,877 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI + * + * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com + * Author: Keshava Munegowda + * Author: Roger Quadros + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap-usb.h" + +#define USBHS_DRIVER_NAME "usbhs_omap" +#define OMAP_EHCI_DEVICE "ehci-omap" +#define OMAP_OHCI_DEVICE "ohci-omap3" + +/* OMAP USBHOST Register addresses */ + +/* UHH Register Set */ +#define OMAP_UHH_REVISION (0x00) +#define OMAP_UHH_SYSCONFIG (0x10) +#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) +#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_UHH_SYSSTATUS (0x14) +#define OMAP_UHH_HOSTCONFIG (0x40) +#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) +#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) +#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) +#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) +#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) +#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) +#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) +#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) +#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) +#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) + +/* OMAP4-specific defines */ +#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) +#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) +#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) +#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) + +#define OMAP4_P1_MODE_CLEAR (3 << 16) +#define OMAP4_P1_MODE_TLL (1 << 16) +#define OMAP4_P1_MODE_HSIC (3 << 16) +#define OMAP4_P2_MODE_CLEAR (3 << 18) +#define OMAP4_P2_MODE_TLL (1 << 18) +#define OMAP4_P2_MODE_HSIC (3 << 18) + +#define OMAP_UHH_DEBUG_CSR (0x44) + +/* Values of UHH_REVISION - Note: these are not given in the TRM */ +#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ +#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ + +#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) +#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) + +#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) +#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) +#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) + + +struct usbhs_hcd_omap { + int nports; + struct clk **utmi_clk; + struct clk **hsic60m_clk; + struct clk **hsic480m_clk; + + struct clk *xclk60mhsp1_ck; + struct clk *xclk60mhsp2_ck; + struct clk *utmi_p1_gfclk; + struct clk *utmi_p2_gfclk; + struct clk *init_60m_fclk; + struct clk *ehci_logic_fck; + + void __iomem *uhh_base; + + struct usbhs_omap_platform_data *pdata; + + u32 usbhs_rev; +}; +/*-------------------------------------------------------------------------*/ + +static const char usbhs_driver_name[] = USBHS_DRIVER_NAME; +static u64 usbhs_dmamask = DMA_BIT_MASK(32); + +/*-------------------------------------------------------------------------*/ + +static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) +{ + writel_relaxed(val, base + reg); +} + +static inline u32 usbhs_read(void __iomem *base, u32 reg) +{ + return readl_relaxed(base + reg); +} + +/*-------------------------------------------------------------------------*/ + +/* + * Map 'enum usbhs_omap_port_mode' found in + * to the device tree binding portN-mode found in + * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' + */ +static const char * const port_modes[] = { + [OMAP_USBHS_PORT_MODE_UNUSED] = "", + [OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy", + [OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll", + [OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic", + [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0", + [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm", + [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0", + [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm", +}; + +static struct platform_device *omap_usbhs_alloc_child(const char *name, + struct resource *res, int num_resources, void *pdata, + size_t pdata_size, struct device *dev) +{ + struct platform_device *child; + int ret; + + child = platform_device_alloc(name, 0); + + if (!child) { + dev_err(dev, "platform_device_alloc %s failed\n", name); + goto err_end; + } + + ret = platform_device_add_resources(child, res, num_resources); + if (ret) { + dev_err(dev, "platform_device_add_resources failed\n"); + goto err_alloc; + } + + ret = platform_device_add_data(child, pdata, pdata_size); + if (ret) { + dev_err(dev, "platform_device_add_data failed\n"); + goto err_alloc; + } + + child->dev.dma_mask = &usbhs_dmamask; + dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); + child->dev.parent = dev; + + ret = platform_device_add(child); + if (ret) { + dev_err(dev, "platform_device_add failed\n"); + goto err_alloc; + } + + return child; + +err_alloc: + platform_device_put(child); + +err_end: + return NULL; +} + +static int omap_usbhs_alloc_children(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); + struct platform_device *ehci; + struct platform_device *ohci; + struct resource *res; + struct resource resources[2]; + int ret; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); + if (!res) { + dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); + ret = -ENODEV; + goto err_end; + } + resources[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); + if (!res) { + dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); + ret = -ENODEV; + goto err_end; + } + resources[1] = *res; + + ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata, + sizeof(*pdata), dev); + + if (!ehci) { + dev_err(dev, "omap_usbhs_alloc_child failed\n"); + ret = -ENOMEM; + goto err_end; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); + if (!res) { + dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); + ret = -ENODEV; + goto err_ehci; + } + resources[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); + if (!res) { + dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); + ret = -ENODEV; + goto err_ehci; + } + resources[1] = *res; + + ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata, + sizeof(*pdata), dev); + if (!ohci) { + dev_err(dev, "omap_usbhs_alloc_child failed\n"); + ret = -ENOMEM; + goto err_ehci; + } + + return 0; + +err_ehci: + platform_device_unregister(ehci); + +err_end: + return ret; +} + +static bool is_ohci_port(enum usbhs_omap_port_mode pmode) +{ + switch (pmode) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return true; + + default: + return false; + } +} + +static int usbhs_runtime_resume(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i, r; + + dev_dbg(dev, "usbhs_runtime_resume\n"); + + omap_tll_enable(pdata); + + if (!IS_ERR(omap->ehci_logic_fck)) + clk_prepare_enable(omap->ehci_logic_fck); + + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_EHCI_PORT_MODE_HSIC: + if (!IS_ERR(omap->hsic60m_clk[i])) { + r = clk_prepare_enable(omap->hsic60m_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d hsic60m clk:%d\n", + i, r); + } + } + + if (!IS_ERR(omap->hsic480m_clk[i])) { + r = clk_prepare_enable(omap->hsic480m_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d hsic480m clk:%d\n", + i, r); + } + } + fallthrough; /* as HSIC mode needs utmi_clk */ + + case OMAP_EHCI_PORT_MODE_TLL: + if (!IS_ERR(omap->utmi_clk[i])) { + r = clk_prepare_enable(omap->utmi_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d clk : %d\n", + i, r); + } + } + break; + default: + break; + } + } + + return 0; +} + +static int usbhs_runtime_suspend(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; + + dev_dbg(dev, "usbhs_runtime_suspend\n"); + + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_EHCI_PORT_MODE_HSIC: + if (!IS_ERR(omap->hsic60m_clk[i])) + clk_disable_unprepare(omap->hsic60m_clk[i]); + + if (!IS_ERR(omap->hsic480m_clk[i])) + clk_disable_unprepare(omap->hsic480m_clk[i]); + fallthrough; /* as utmi_clks were used in HSIC mode */ + + case OMAP_EHCI_PORT_MODE_TLL: + if (!IS_ERR(omap->utmi_clk[i])) + clk_disable_unprepare(omap->utmi_clk[i]); + break; + default: + break; + } + } + + if (!IS_ERR(omap->ehci_logic_fck)) + clk_disable_unprepare(omap->ehci_logic_fck); + + omap_tll_disable(pdata); + + return 0; +} + +static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap, + unsigned reg) +{ + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; + + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_USBHS_PORT_MODE_UNUSED: + reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i); + break; + case OMAP_EHCI_PORT_MODE_PHY: + if (pdata->single_ulpi_bypass) + break; + + if (i == 0) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS + << (i-1)); + break; + default: + if (pdata->single_ulpi_bypass) + break; + + if (i == 0) + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS + << (i-1); + break; + } + } + + if (pdata->single_ulpi_bypass) { + /* bypass ULPI only if none of the ports use PHY mode */ + reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(pdata->port_mode[i])) { + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + break; + } + } + } + + return reg; +} + +static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap, + unsigned reg) +{ + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; + + for (i = 0; i < omap->nports; i++) { + /* Clear port mode fields for PHY mode */ + reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i); + + if (is_ehci_tll_mode(pdata->port_mode[i]) || + (is_ohci_port(pdata->port_mode[i]))) + reg |= OMAP4_P1_MODE_TLL << 2 * i; + else if (is_ehci_hsic_mode(pdata->port_mode[i])) + reg |= OMAP4_P1_MODE_HSIC << 2 * i; + } + + return reg; +} + +static void omap_usbhs_init(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + unsigned reg; + + dev_dbg(dev, "starting TI HSUSB Controller\n"); + + pm_runtime_get_sync(dev); + + reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); + /* setup ULPI bypass and burst configurations */ + reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); + reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; + reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; + + switch (omap->usbhs_rev) { + case OMAP_USBHS_REV1: + reg = omap_usbhs_rev1_hostconfig(omap, reg); + break; + + case OMAP_USBHS_REV2: + reg = omap_usbhs_rev2_hostconfig(omap, reg); + break; + + default: /* newer revisions */ + reg = omap_usbhs_rev2_hostconfig(omap, reg); + break; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); + dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); + + pm_runtime_put_sync(dev); +} + +static int usbhs_omap_get_dt_pdata(struct device *dev, + struct usbhs_omap_platform_data *pdata) +{ + int ret, i; + struct device_node *node = dev->of_node; + + ret = of_property_read_u32(node, "num-ports", &pdata->nports); + if (ret) + pdata->nports = 0; + + if (pdata->nports > OMAP3_HS_USB_PORTS) { + dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n", + pdata->nports, OMAP3_HS_USB_PORTS); + return -ENODEV; + } + + /* get port modes */ + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + char prop[11]; + const char *mode; + + pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED; + + snprintf(prop, sizeof(prop), "port%d-mode", i + 1); + ret = of_property_read_string(node, prop, &mode); + if (ret < 0) + continue; + + /* get 'enum usbhs_omap_port_mode' from port mode string */ + ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode); + if (ret < 0) { + dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", + i, mode); + return -ENODEV; + } + + dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret); + pdata->port_mode[i] = ret; + } + + /* get flags */ + pdata->single_ulpi_bypass = of_property_read_bool(node, + "single-ulpi-bypass"); + + return 0; +} + +static const struct of_device_id usbhs_child_match_table[] = { + { .compatible = "ti,ehci-omap", }, + { .compatible = "ti,ohci-omap3", }, + { } +}; + +/** + * usbhs_omap_probe - initialize TI-based HCDs + * + * Allocates basic resources for this USB host controller. + * + * @pdev: Pointer to this device's platform device structure + */ +static int usbhs_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); + struct usbhs_hcd_omap *omap; + struct resource *res; + int ret = 0; + int i; + bool need_logic_fck; + + if (dev->of_node) { + /* For DT boot we populate platform data from OF node */ + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = usbhs_omap_get_dt_pdata(dev, pdata); + if (ret) + return ret; + + dev->platform_data = pdata; + } + + if (!pdata) { + dev_err(dev, "Missing platform data\n"); + return -ENODEV; + } + + if (pdata->nports > OMAP3_HS_USB_PORTS) { + dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n", + pdata->nports, OMAP3_HS_USB_PORTS); + return -ENODEV; + } + + omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); + if (!omap) { + dev_err(dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + omap->uhh_base = devm_ioremap_resource(dev, res); + if (IS_ERR(omap->uhh_base)) + return PTR_ERR(omap->uhh_base); + + omap->pdata = pdata; + + /* Initialize the TLL subsystem */ + omap_tll_init(pdata); + + pm_runtime_enable(dev); + + platform_set_drvdata(pdev, omap); + pm_runtime_get_sync(dev); + + omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); + + /* we need to call runtime suspend before we update omap->nports + * to prevent unbalanced clk_disable() + */ + pm_runtime_put_sync(dev); + + /* + * If platform data contains nports then use that + * else make out number of ports from USBHS revision + */ + if (pdata->nports) { + omap->nports = pdata->nports; + } else { + switch (omap->usbhs_rev) { + case OMAP_USBHS_REV1: + omap->nports = 3; + break; + case OMAP_USBHS_REV2: + omap->nports = 2; + break; + default: + omap->nports = OMAP3_HS_USB_PORTS; + dev_dbg(dev, + "USB HOST Rev:0x%x not recognized, assuming %d ports\n", + omap->usbhs_rev, omap->nports); + break; + } + pdata->nports = omap->nports; + } + + i = sizeof(struct clk *) * omap->nports; + omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL); + omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL); + omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL); + + if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) { + dev_err(dev, "Memory allocation failed\n"); + ret = -ENOMEM; + goto err_mem; + } + + /* Set all clocks as invalid to begin with */ + omap->ehci_logic_fck = ERR_PTR(-ENODEV); + omap->init_60m_fclk = ERR_PTR(-ENODEV); + omap->utmi_p1_gfclk = ERR_PTR(-ENODEV); + omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); + omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV); + omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); + + for (i = 0; i < omap->nports; i++) { + omap->utmi_clk[i] = ERR_PTR(-ENODEV); + omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); + omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); + } + + /* for OMAP3 i.e. USBHS REV1 */ + if (omap->usbhs_rev == OMAP_USBHS_REV1) { + need_logic_fck = false; + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(pdata->port_mode[i]) || + is_ehci_tll_mode(pdata->port_mode[i]) || + is_ehci_hsic_mode(pdata->port_mode[i])) + + need_logic_fck |= true; + } + + if (need_logic_fck) { + omap->ehci_logic_fck = devm_clk_get(dev, + "usbhost_120m_fck"); + if (IS_ERR(omap->ehci_logic_fck)) { + ret = PTR_ERR(omap->ehci_logic_fck); + dev_err(dev, "usbhost_120m_fck failed:%d\n", + ret); + goto err_mem; + } + } + goto initialize; + } + + /* for OMAP4+ i.e. USBHS REV2+ */ + omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(omap->utmi_p1_gfclk)) { + ret = PTR_ERR(omap->utmi_p1_gfclk); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); + goto err_mem; + } + + omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(omap->utmi_p2_gfclk)) { + ret = PTR_ERR(omap->utmi_p2_gfclk); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_mem; + } + + omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1"); + if (IS_ERR(omap->xclk60mhsp1_ck)) { + ret = PTR_ERR(omap->xclk60mhsp1_ck); + dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret); + goto err_mem; + } + + omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2"); + if (IS_ERR(omap->xclk60mhsp2_ck)) { + ret = PTR_ERR(omap->xclk60mhsp2_ck); + dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret); + goto err_mem; + } + + omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int"); + if (IS_ERR(omap->init_60m_fclk)) { + ret = PTR_ERR(omap->init_60m_fclk); + dev_err(dev, "refclk_60m_int failed error:%d\n", ret); + goto err_mem; + } + + for (i = 0; i < omap->nports; i++) { + char clkname[30]; + + /* clock names are indexed from 1*/ + snprintf(clkname, sizeof(clkname), + "usb_host_hs_utmi_p%d_clk", i + 1); + + /* If a clock is not found we won't bail out as not all + * platforms have all clocks and we can function without + * them + */ + omap->utmi_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->utmi_clk[i])) { + ret = PTR_ERR(omap->utmi_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } + + snprintf(clkname, sizeof(clkname), + "usb_host_hs_hsic480m_p%d_clk", i + 1); + omap->hsic480m_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->hsic480m_clk[i])) { + ret = PTR_ERR(omap->hsic480m_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } + + snprintf(clkname, sizeof(clkname), + "usb_host_hs_hsic60m_p%d_clk", i + 1); + omap->hsic60m_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->hsic60m_clk[i])) { + ret = PTR_ERR(omap->hsic60m_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } + } + + if (is_ehci_phy_mode(pdata->port_mode[0])) { + ret = clk_set_parent(omap->utmi_p1_gfclk, + omap->xclk60mhsp1_ck); + if (ret != 0) { + dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n", + ret); + goto err_mem; + } + } else if (is_ehci_tll_mode(pdata->port_mode[0])) { + ret = clk_set_parent(omap->utmi_p1_gfclk, + omap->init_60m_fclk); + if (ret != 0) { + dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n", + ret); + goto err_mem; + } + } + + if (is_ehci_phy_mode(pdata->port_mode[1])) { + ret = clk_set_parent(omap->utmi_p2_gfclk, + omap->xclk60mhsp2_ck); + if (ret != 0) { + dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n", + ret); + goto err_mem; + } + } else if (is_ehci_tll_mode(pdata->port_mode[1])) { + ret = clk_set_parent(omap->utmi_p2_gfclk, + omap->init_60m_fclk); + if (ret != 0) { + dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n", + ret); + goto err_mem; + } + } + +initialize: + omap_usbhs_init(dev); + + if (dev->of_node) { + ret = of_platform_populate(dev->of_node, + usbhs_child_match_table, NULL, dev); + + if (ret) { + dev_err(dev, "Failed to create DT children: %d\n", ret); + goto err_mem; + } + + } else { + ret = omap_usbhs_alloc_children(pdev); + if (ret) { + dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", + ret); + goto err_mem; + } + } + + return 0; + +err_mem: + pm_runtime_disable(dev); + + return ret; +} + +static int usbhs_omap_remove_child(struct device *dev, void *data) +{ + dev_info(dev, "unregistering\n"); + platform_device_unregister(to_platform_device(dev)); + return 0; +} + +/** + * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs + * @pdev: USB Host Controller being removed + * + * Reverses the effect of usbhs_omap_probe(). + */ +static int usbhs_omap_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + /* remove children */ + device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child); + return 0; +} + +static const struct dev_pm_ops usbhsomap_dev_pm_ops = { + .runtime_suspend = usbhs_runtime_suspend, + .runtime_resume = usbhs_runtime_resume, +}; + +static const struct of_device_id usbhs_omap_dt_ids[] = { + { .compatible = "ti,usbhs-host" }, + { } +}; + +MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids); + + +static struct platform_driver usbhs_omap_driver = { + .driver = { + .name = usbhs_driver_name, + .pm = &usbhsomap_dev_pm_ops, + .of_match_table = usbhs_omap_dt_ids, + }, + .probe = usbhs_omap_probe, + .remove = usbhs_omap_remove, +}; + +MODULE_AUTHOR("Keshava Munegowda "); +MODULE_AUTHOR("Roger Quadros "); +MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); + +static int omap_usbhs_drvinit(void) +{ + return platform_driver_register(&usbhs_omap_driver); +} + +/* + * init before ehci and ohci drivers; + * The usbhs core driver should be initialized much before + * the omap ehci and ohci probe functions are called. + * This usbhs core driver should be initialized after + * usb tll driver + */ +fs_initcall_sync(omap_usbhs_drvinit); + +static void omap_usbhs_drvexit(void) +{ + platform_driver_unregister(&usbhs_omap_driver); +} +module_exit(omap_usbhs_drvexit); -- cgit v1.2.3