From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/qcom-pm8008.c | 247 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 247 insertions(+) create mode 100644 drivers/mfd/qcom-pm8008.c (limited to 'drivers/mfd/qcom-pm8008.c') diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c new file mode 100644 index 000000000..9f3c4a01b --- /dev/null +++ b/drivers/mfd/qcom-pm8008.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define I2C_INTR_STATUS_BASE 0x0550 +#define INT_RT_STS_OFFSET 0x10 +#define INT_SET_TYPE_OFFSET 0x11 +#define INT_POL_HIGH_OFFSET 0x12 +#define INT_POL_LOW_OFFSET 0x13 +#define INT_LATCHED_CLR_OFFSET 0x14 +#define INT_EN_SET_OFFSET 0x15 +#define INT_EN_CLR_OFFSET 0x16 +#define INT_LATCHED_STS_OFFSET 0x18 + +enum { + PM8008_MISC, + PM8008_TEMP_ALARM, + PM8008_GPIO1, + PM8008_GPIO2, + PM8008_NUM_PERIPHS, +}; + +#define PM8008_PERIPH_0_BASE 0x900 +#define PM8008_PERIPH_1_BASE 0x2400 +#define PM8008_PERIPH_2_BASE 0xC000 +#define PM8008_PERIPH_3_BASE 0xC100 + +#define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE +#define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE +#define PM8008_GPIO2_ADDR PM8008_PERIPH_3_BASE + +#define PM8008_STATUS_BASE (PM8008_PERIPH_0_BASE | INT_LATCHED_STS_OFFSET) +#define PM8008_MASK_BASE (PM8008_PERIPH_0_BASE | INT_EN_SET_OFFSET) +#define PM8008_UNMASK_BASE (PM8008_PERIPH_0_BASE | INT_EN_CLR_OFFSET) +#define PM8008_TYPE_BASE (PM8008_PERIPH_0_BASE | INT_SET_TYPE_OFFSET) +#define PM8008_ACK_BASE (PM8008_PERIPH_0_BASE | INT_LATCHED_CLR_OFFSET) +#define PM8008_POLARITY_HI_BASE (PM8008_PERIPH_0_BASE | INT_POL_HIGH_OFFSET) +#define PM8008_POLARITY_LO_BASE (PM8008_PERIPH_0_BASE | INT_POL_LOW_OFFSET) + +#define PM8008_PERIPH_OFFSET(paddr) (paddr - PM8008_PERIPH_0_BASE) + +static unsigned int p0_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_0_BASE)}; +static unsigned int p1_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_1_BASE)}; +static unsigned int p2_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_2_BASE)}; +static unsigned int p3_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_3_BASE)}; + +static struct regmap_irq_sub_irq_map pm8008_sub_reg_offsets[] = { + REGMAP_IRQ_MAIN_REG_OFFSET(p0_offs), + REGMAP_IRQ_MAIN_REG_OFFSET(p1_offs), + REGMAP_IRQ_MAIN_REG_OFFSET(p2_offs), + REGMAP_IRQ_MAIN_REG_OFFSET(p3_offs), +}; + +static unsigned int pm8008_virt_regs[] = { + PM8008_POLARITY_HI_BASE, + PM8008_POLARITY_LO_BASE, +}; + +enum { + POLARITY_HI_INDEX, + POLARITY_LO_INDEX, + PM8008_NUM_VIRT_REGS, +}; + +static struct regmap_irq pm8008_irqs[] = { + REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO, PM8008_MISC, BIT(0)), + REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO, PM8008_MISC, BIT(1)), + REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2, PM8008_MISC, BIT(2)), + REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3, PM8008_MISC, BIT(3)), + REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC, BIT(4)), + REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM, PM8008_TEMP_ALARM, BIT(0)), + REGMAP_IRQ_REG(PM8008_IRQ_GPIO1, PM8008_GPIO1, BIT(0)), + REGMAP_IRQ_REG(PM8008_IRQ_GPIO2, PM8008_GPIO2, BIT(0)), +}; + +static int pm8008_set_type_virt(unsigned int **virt_buf, + unsigned int type, unsigned long hwirq, + int reg) +{ + switch (type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + virt_buf[POLARITY_HI_INDEX][reg] &= ~pm8008_irqs[hwirq].mask; + virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask; + break; + + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask; + virt_buf[POLARITY_LO_INDEX][reg] &= ~pm8008_irqs[hwirq].mask; + break; + + case IRQ_TYPE_EDGE_BOTH: + virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask; + virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static struct regmap_irq_chip pm8008_irq_chip = { + .name = "pm8008_irq", + .main_status = I2C_INTR_STATUS_BASE, + .num_main_regs = 1, + .num_virt_regs = PM8008_NUM_VIRT_REGS, + .irqs = pm8008_irqs, + .num_irqs = ARRAY_SIZE(pm8008_irqs), + .num_regs = PM8008_NUM_PERIPHS, + .not_fixed_stride = true, + .sub_reg_offsets = pm8008_sub_reg_offsets, + .set_type_virt = pm8008_set_type_virt, + .status_base = PM8008_STATUS_BASE, + .mask_base = PM8008_MASK_BASE, + .unmask_base = PM8008_UNMASK_BASE, + .type_base = PM8008_TYPE_BASE, + .ack_base = PM8008_ACK_BASE, + .virt_reg_base = pm8008_virt_regs, + .num_type_reg = PM8008_NUM_PERIPHS, +}; + +static struct regmap_config qcom_mfd_regmap_cfg = { + .reg_bits = 16, + .val_bits = 8, + .max_register = 0xFFFF, +}; + +static int pm8008_init(struct regmap *regmap) +{ + int rc; + + /* + * Set TEMP_ALARM peripheral's TYPE so that the regmap-irq framework + * reads this as the default value instead of zero, the HW default. + * This is required to enable the writing of TYPE registers in + * regmap_irq_sync_unlock(). + */ + rc = regmap_write(regmap, (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET), BIT(0)); + if (rc) + return rc; + + /* Do the same for GPIO1 and GPIO2 peripherals */ + rc = regmap_write(regmap, (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0)); + if (rc) + return rc; + + rc = regmap_write(regmap, (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0)); + + return rc; +} + +static int pm8008_probe_irq_peripherals(struct device *dev, + struct regmap *regmap, + int client_irq) +{ + int rc, i; + struct regmap_irq_type *type; + struct regmap_irq_chip_data *irq_data; + + rc = pm8008_init(regmap); + if (rc) { + dev_err(dev, "Init failed: %d\n", rc); + return rc; + } + + for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) { + type = &pm8008_irqs[i].type; + + type->type_reg_offset = pm8008_irqs[i].reg_offset; + type->type_rising_val = pm8008_irqs[i].mask; + type->type_falling_val = pm8008_irqs[i].mask; + type->type_level_high_val = 0; + type->type_level_low_val = 0; + + if (type->type_reg_offset == PM8008_MISC) + type->types_supported = IRQ_TYPE_EDGE_RISING; + else + type->types_supported = (IRQ_TYPE_EDGE_BOTH | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW); + } + + rc = devm_regmap_add_irq_chip(dev, regmap, client_irq, + IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data); + if (rc) { + dev_err(dev, "Failed to add IRQ chip: %d\n", rc); + return rc; + } + + return 0; +} + +static int pm8008_probe(struct i2c_client *client) +{ + int rc; + struct device *dev; + struct regmap *regmap; + + dev = &client->dev; + regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + i2c_set_clientdata(client, regmap); + + if (of_property_read_bool(dev->of_node, "interrupt-controller")) { + rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq); + if (rc) + dev_err(dev, "Failed to probe irq periphs: %d\n", rc); + } + + return devm_of_platform_populate(dev); +} + +static const struct of_device_id pm8008_match[] = { + { .compatible = "qcom,pm8008", }, + { }, +}; + +static struct i2c_driver pm8008_mfd_driver = { + .driver = { + .name = "pm8008", + .of_match_table = pm8008_match, + }, + .probe_new = pm8008_probe, +}; +module_i2c_driver(pm8008_mfd_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("i2c:qcom-pm8008"); -- cgit v1.2.3