From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/rk808.c | 880 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 880 insertions(+) create mode 100644 drivers/mfd/rk808.c (limited to 'drivers/mfd/rk808.c') diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c new file mode 100644 index 000000000..f44fc3f08 --- /dev/null +++ b/drivers/mfd/rk808.c @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MFD core driver for Rockchip RK808/RK818 + * + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * Author: Chris Zhong + * Author: Zhang Qing + * + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * + * Author: Wadim Egorov + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct rk808_reg_data { + int addr; + int mask; + int value; +}; + +static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) +{ + /* + * Notes: + * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but + * we don't use that feature. It's better to cache. + * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since + * bits are cleared in case when we shutoff anyway, but better safe. + */ + + switch (reg) { + case RK808_SECONDS_REG ... RK808_WEEKS_REG: + case RK808_RTC_STATUS_REG: + case RK808_VB_MON_REG: + case RK808_THERMAL_REG: + case RK808_DCDC_UV_STS_REG: + case RK808_LDO_UV_STS_REG: + case RK808_DCDC_PG_REG: + case RK808_LDO_PG_REG: + case RK808_DEVCTRL_REG: + case RK808_INT_STS_REG1: + case RK808_INT_STS_REG2: + return true; + } + + return false; +} + +static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) +{ + /* + * Notes: + * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but + * we don't use that feature. It's better to cache. + */ + + switch (reg) { + case RK817_SECONDS_REG ... RK817_WEEKS_REG: + case RK817_RTC_STATUS_REG: + case RK817_CODEC_DTOP_LPT_SRST: + case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0: + case RK817_PMIC_CHRG_STS: + case RK817_PMIC_CHRG_OUT: + case RK817_PMIC_CHRG_IN: + case RK817_INT_STS_REG0: + case RK817_INT_STS_REG1: + case RK817_INT_STS_REG2: + case RK817_SYS_STS: + return true; + } + + return false; +} + +static const struct regmap_config rk818_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RK818_USB_CTRL_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = rk808_is_volatile_reg, +}; + +static const struct regmap_config rk805_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RK805_OFF_SOURCE_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = rk808_is_volatile_reg, +}; + +static const struct regmap_config rk808_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RK808_IO_POL_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = rk808_is_volatile_reg, +}; + +static const struct regmap_config rk817_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RK817_GPIO_INT_CFG, + .cache_type = REGCACHE_NONE, + .volatile_reg = rk817_is_volatile_reg, +}; + +static const struct resource rtc_resources[] = { + DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM), +}; + +static const struct resource rk817_rtc_resources[] = { + DEFINE_RES_IRQ(RK817_IRQ_RTC_ALARM), +}; + +static const struct resource rk805_key_resources[] = { + DEFINE_RES_IRQ(RK805_IRQ_PWRON_RISE), + DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL), +}; + +static const struct resource rk817_pwrkey_resources[] = { + DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE), + DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL), +}; + +static const struct resource rk817_charger_resources[] = { + DEFINE_RES_IRQ(RK817_IRQ_PLUG_IN), + DEFINE_RES_IRQ(RK817_IRQ_PLUG_OUT), +}; + +static const struct mfd_cell rk805s[] = { + { .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, }, + { .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, }, + { .name = "rk805-pinctrl", .id = PLATFORM_DEVID_NONE, }, + { + .name = "rk808-rtc", + .num_resources = ARRAY_SIZE(rtc_resources), + .resources = &rtc_resources[0], + .id = PLATFORM_DEVID_NONE, + }, + { .name = "rk805-pwrkey", + .num_resources = ARRAY_SIZE(rk805_key_resources), + .resources = &rk805_key_resources[0], + .id = PLATFORM_DEVID_NONE, + }, +}; + +static const struct mfd_cell rk808s[] = { + { .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, }, + { .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, }, + { + .name = "rk808-rtc", + .num_resources = ARRAY_SIZE(rtc_resources), + .resources = rtc_resources, + .id = PLATFORM_DEVID_NONE, + }, +}; + +static const struct mfd_cell rk817s[] = { + { .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, }, + { .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, }, + { + .name = "rk805-pwrkey", + .num_resources = ARRAY_SIZE(rk817_pwrkey_resources), + .resources = &rk817_pwrkey_resources[0], + .id = PLATFORM_DEVID_NONE, + }, + { + .name = "rk808-rtc", + .num_resources = ARRAY_SIZE(rk817_rtc_resources), + .resources = &rk817_rtc_resources[0], + .id = PLATFORM_DEVID_NONE, + }, + { .name = "rk817-codec", .id = PLATFORM_DEVID_NONE, }, + { + .name = "rk817-charger", + .num_resources = ARRAY_SIZE(rk817_charger_resources), + .resources = &rk817_charger_resources[0], + .id = PLATFORM_DEVID_NONE, + }, +}; + +static const struct mfd_cell rk818s[] = { + { .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, }, + { + .name = "rk808-rtc", + .num_resources = ARRAY_SIZE(rtc_resources), + .resources = rtc_resources, + .id = PLATFORM_DEVID_NONE, + }, +}; + +static const struct rk808_reg_data rk805_pre_init_reg[] = { + {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK, + RK805_BUCK1_2_ILMAX_4000MA}, + {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK, + RK805_BUCK1_2_ILMAX_4000MA}, + {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK, + RK805_BUCK3_ILMAX_3000MA}, + {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK, + RK805_BUCK4_ILMAX_3500MA}, + {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA}, + {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C}, +}; + +static const struct rk808_reg_data rk808_pre_init_reg[] = { + { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA }, + { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA }, + { RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, + { RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK, BUCK_ILMIN_200MA }, + { RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_200MA }, + { RK808_DCDC_UV_ACT_REG, BUCK_UV_ACT_MASK, BUCK_UV_ACT_DISABLE}, + { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | + VB_LO_SEL_3500MV }, +}; + +static const struct rk808_reg_data rk817_pre_init_reg[] = { + {RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP}, + /* Codec specific registers */ + { RK817_CODEC_DTOP_VUCTL, MASK_ALL, 0x03 }, + { RK817_CODEC_DTOP_VUCTIME, MASK_ALL, 0x00 }, + { RK817_CODEC_DTOP_LPT_SRST, MASK_ALL, 0x00 }, + { RK817_CODEC_DTOP_DIGEN_CLKE, MASK_ALL, 0x00 }, + /* from vendor driver, CODEC_AREF_RTCFG0 not defined in data sheet */ + { RK817_CODEC_AREF_RTCFG0, MASK_ALL, 0x00 }, + { RK817_CODEC_AREF_RTCFG1, MASK_ALL, 0x06 }, + { RK817_CODEC_AADC_CFG0, MASK_ALL, 0xc8 }, + /* from vendor driver, CODEC_AADC_CFG1 not defined in data sheet */ + { RK817_CODEC_AADC_CFG1, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_VOLL, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_VOLR, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_SR_ACL0, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_ALC1, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_ALC2, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_NG, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_HPF, MASK_ALL, 0x00 }, + { RK817_CODEC_DADC_RVOLL, MASK_ALL, 0xff }, + { RK817_CODEC_DADC_RVOLR, MASK_ALL, 0xff }, + { RK817_CODEC_AMIC_CFG0, MASK_ALL, 0x70 }, + { RK817_CODEC_AMIC_CFG1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_PGA_GAIN, MASK_ALL, 0x66 }, + { RK817_CODEC_DMIC_LMT1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_LMT2, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_NG1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_NG2, MASK_ALL, 0x00 }, + /* from vendor driver, CODEC_ADAC_CFG0 not defined in data sheet */ + { RK817_CODEC_ADAC_CFG0, MASK_ALL, 0x00 }, + { RK817_CODEC_ADAC_CFG1, MASK_ALL, 0x07 }, + { RK817_CODEC_DDAC_POPD_DACST, MASK_ALL, 0x82 }, + { RK817_CODEC_DDAC_VOLL, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_VOLR, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_SR_LMT0, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_LMT1, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_LMT2, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_MUTE_MIXCTL, MASK_ALL, 0xa0 }, + { RK817_CODEC_DDAC_RVOLL, MASK_ALL, 0xff }, + { RK817_CODEC_DADC_RVOLR, MASK_ALL, 0xff }, + { RK817_CODEC_AMIC_CFG0, MASK_ALL, 0x70 }, + { RK817_CODEC_AMIC_CFG1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_PGA_GAIN, MASK_ALL, 0x66 }, + { RK817_CODEC_DMIC_LMT1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_LMT2, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_NG1, MASK_ALL, 0x00 }, + { RK817_CODEC_DMIC_NG2, MASK_ALL, 0x00 }, + /* from vendor driver, CODEC_ADAC_CFG0 not defined in data sheet */ + { RK817_CODEC_ADAC_CFG0, MASK_ALL, 0x00 }, + { RK817_CODEC_ADAC_CFG1, MASK_ALL, 0x07 }, + { RK817_CODEC_DDAC_POPD_DACST, MASK_ALL, 0x82 }, + { RK817_CODEC_DDAC_VOLL, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_VOLR, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_SR_LMT0, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_LMT1, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_LMT2, MASK_ALL, 0x00 }, + { RK817_CODEC_DDAC_MUTE_MIXCTL, MASK_ALL, 0xa0 }, + { RK817_CODEC_DDAC_RVOLL, MASK_ALL, 0xff }, + { RK817_CODEC_DDAC_RVOLR, MASK_ALL, 0xff }, + { RK817_CODEC_AHP_ANTI0, MASK_ALL, 0x00 }, + { RK817_CODEC_AHP_ANTI1, MASK_ALL, 0x00 }, + { RK817_CODEC_AHP_CFG0, MASK_ALL, 0xe0 }, + { RK817_CODEC_AHP_CFG1, MASK_ALL, 0x1f }, + { RK817_CODEC_AHP_CP, MASK_ALL, 0x09 }, + { RK817_CODEC_ACLASSD_CFG1, MASK_ALL, 0x69 }, + { RK817_CODEC_ACLASSD_CFG2, MASK_ALL, 0x44 }, + { RK817_CODEC_APLL_CFG0, MASK_ALL, 0x04 }, + { RK817_CODEC_APLL_CFG1, MASK_ALL, 0x00 }, + { RK817_CODEC_APLL_CFG2, MASK_ALL, 0x30 }, + { RK817_CODEC_APLL_CFG3, MASK_ALL, 0x19 }, + { RK817_CODEC_APLL_CFG4, MASK_ALL, 0x65 }, + { RK817_CODEC_APLL_CFG5, MASK_ALL, 0x01 }, + { RK817_CODEC_DI2S_CKM, MASK_ALL, 0x01 }, + { RK817_CODEC_DI2S_RSD, MASK_ALL, 0x00 }, + { RK817_CODEC_DI2S_RXCR1, MASK_ALL, 0x00 }, + { RK817_CODEC_DI2S_RXCR2, MASK_ALL, 0x17 }, + { RK817_CODEC_DI2S_RXCMD_TSD, MASK_ALL, 0x00 }, + { RK817_CODEC_DI2S_TXCR1, MASK_ALL, 0x00 }, + { RK817_CODEC_DI2S_TXCR2, MASK_ALL, 0x17 }, + { RK817_CODEC_DI2S_TXCR3_TXCMD, MASK_ALL, 0x00 }, + {RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_L}, + {RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK, + RK817_HOTDIE_105 | RK817_TSD_140}, +}; + +static const struct rk808_reg_data rk818_pre_init_reg[] = { + /* improve efficiency */ + { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA }, + { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA }, + { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, + { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK, + RK818_USB_ILMIN_2000MA }, + /* close charger when usb lower then 3.4V */ + { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, + (0x7 << 4) }, + /* no action when vref */ + { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL }, + /* enable HDMI 5V */ + { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN }, + { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | + VB_LO_SEL_3500MV }, +}; + +static const struct regmap_irq rk805_irqs[] = { + [RK805_IRQ_PWRON_RISE] = { + .mask = RK805_IRQ_PWRON_RISE_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_VB_LOW] = { + .mask = RK805_IRQ_VB_LOW_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_PWRON] = { + .mask = RK805_IRQ_PWRON_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_PWRON_LP] = { + .mask = RK805_IRQ_PWRON_LP_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_HOTDIE] = { + .mask = RK805_IRQ_HOTDIE_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_RTC_ALARM] = { + .mask = RK805_IRQ_RTC_ALARM_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_RTC_PERIOD] = { + .mask = RK805_IRQ_RTC_PERIOD_MSK, + .reg_offset = 0, + }, + [RK805_IRQ_PWRON_FALL] = { + .mask = RK805_IRQ_PWRON_FALL_MSK, + .reg_offset = 0, + }, +}; + +static const struct regmap_irq rk808_irqs[] = { + /* INT_STS */ + [RK808_IRQ_VOUT_LO] = { + .mask = RK808_IRQ_VOUT_LO_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_VB_LO] = { + .mask = RK808_IRQ_VB_LO_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_PWRON] = { + .mask = RK808_IRQ_PWRON_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_PWRON_LP] = { + .mask = RK808_IRQ_PWRON_LP_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_HOTDIE] = { + .mask = RK808_IRQ_HOTDIE_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_RTC_ALARM] = { + .mask = RK808_IRQ_RTC_ALARM_MSK, + .reg_offset = 0, + }, + [RK808_IRQ_RTC_PERIOD] = { + .mask = RK808_IRQ_RTC_PERIOD_MSK, + .reg_offset = 0, + }, + + /* INT_STS2 */ + [RK808_IRQ_PLUG_IN_INT] = { + .mask = RK808_IRQ_PLUG_IN_INT_MSK, + .reg_offset = 1, + }, + [RK808_IRQ_PLUG_OUT_INT] = { + .mask = RK808_IRQ_PLUG_OUT_INT_MSK, + .reg_offset = 1, + }, +}; + +static const struct regmap_irq rk818_irqs[] = { + /* INT_STS */ + [RK818_IRQ_VOUT_LO] = { + .mask = RK818_IRQ_VOUT_LO_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_VB_LO] = { + .mask = RK818_IRQ_VB_LO_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_PWRON] = { + .mask = RK818_IRQ_PWRON_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_PWRON_LP] = { + .mask = RK818_IRQ_PWRON_LP_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_HOTDIE] = { + .mask = RK818_IRQ_HOTDIE_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_RTC_ALARM] = { + .mask = RK818_IRQ_RTC_ALARM_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_RTC_PERIOD] = { + .mask = RK818_IRQ_RTC_PERIOD_MSK, + .reg_offset = 0, + }, + [RK818_IRQ_USB_OV] = { + .mask = RK818_IRQ_USB_OV_MSK, + .reg_offset = 0, + }, + + /* INT_STS2 */ + [RK818_IRQ_PLUG_IN] = { + .mask = RK818_IRQ_PLUG_IN_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_PLUG_OUT] = { + .mask = RK818_IRQ_PLUG_OUT_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_CHG_OK] = { + .mask = RK818_IRQ_CHG_OK_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_CHG_TE] = { + .mask = RK818_IRQ_CHG_TE_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_CHG_TS1] = { + .mask = RK818_IRQ_CHG_TS1_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_TS2] = { + .mask = RK818_IRQ_TS2_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_CHG_CVTLIM] = { + .mask = RK818_IRQ_CHG_CVTLIM_MSK, + .reg_offset = 1, + }, + [RK818_IRQ_DISCHG_ILIM] = { + .mask = RK818_IRQ_DISCHG_ILIM_MSK, + .reg_offset = 1, + }, +}; + +static const struct regmap_irq rk817_irqs[RK817_IRQ_END] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), + REGMAP_IRQ_REG_LINE(8, 8), + REGMAP_IRQ_REG_LINE(9, 8), + REGMAP_IRQ_REG_LINE(10, 8), + REGMAP_IRQ_REG_LINE(11, 8), + REGMAP_IRQ_REG_LINE(12, 8), + REGMAP_IRQ_REG_LINE(13, 8), + REGMAP_IRQ_REG_LINE(14, 8), + REGMAP_IRQ_REG_LINE(15, 8), + REGMAP_IRQ_REG_LINE(16, 8), + REGMAP_IRQ_REG_LINE(17, 8), + REGMAP_IRQ_REG_LINE(18, 8), + REGMAP_IRQ_REG_LINE(19, 8), + REGMAP_IRQ_REG_LINE(20, 8), + REGMAP_IRQ_REG_LINE(21, 8), + REGMAP_IRQ_REG_LINE(22, 8), + REGMAP_IRQ_REG_LINE(23, 8) +}; + +static struct regmap_irq_chip rk805_irq_chip = { + .name = "rk805", + .irqs = rk805_irqs, + .num_irqs = ARRAY_SIZE(rk805_irqs), + .num_regs = 1, + .status_base = RK805_INT_STS_REG, + .mask_base = RK805_INT_STS_MSK_REG, + .ack_base = RK805_INT_STS_REG, + .init_ack_masked = true, +}; + +static const struct regmap_irq_chip rk808_irq_chip = { + .name = "rk808", + .irqs = rk808_irqs, + .num_irqs = ARRAY_SIZE(rk808_irqs), + .num_regs = 2, + .irq_reg_stride = 2, + .status_base = RK808_INT_STS_REG1, + .mask_base = RK808_INT_STS_MSK_REG1, + .ack_base = RK808_INT_STS_REG1, + .init_ack_masked = true, +}; + +static struct regmap_irq_chip rk817_irq_chip = { + .name = "rk817", + .irqs = rk817_irqs, + .num_irqs = ARRAY_SIZE(rk817_irqs), + .num_regs = 3, + .irq_reg_stride = 2, + .status_base = RK817_INT_STS_REG0, + .mask_base = RK817_INT_STS_MSK_REG0, + .ack_base = RK817_INT_STS_REG0, + .init_ack_masked = true, +}; + +static const struct regmap_irq_chip rk818_irq_chip = { + .name = "rk818", + .irqs = rk818_irqs, + .num_irqs = ARRAY_SIZE(rk818_irqs), + .num_regs = 2, + .irq_reg_stride = 2, + .status_base = RK818_INT_STS_REG1, + .mask_base = RK818_INT_STS_MSK_REG1, + .ack_base = RK818_INT_STS_REG1, + .init_ack_masked = true, +}; + +static struct i2c_client *rk808_i2c_client; + +static void rk808_pm_power_off(void) +{ + int ret; + unsigned int reg, bit; + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); + + switch (rk808->variant) { + case RK805_ID: + reg = RK805_DEV_CTRL_REG; + bit = DEV_OFF; + break; + case RK808_ID: + reg = RK808_DEVCTRL_REG, + bit = DEV_OFF_RST; + break; + case RK809_ID: + case RK817_ID: + reg = RK817_SYS_CFG(3); + bit = DEV_OFF; + break; + case RK818_ID: + reg = RK818_DEVCTRL_REG; + bit = DEV_OFF; + break; + default: + return; + } + ret = regmap_update_bits(rk808->regmap, reg, bit, bit); + if (ret) + dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n"); +} + +static int rk808_restart_notify(struct notifier_block *this, unsigned long mode, void *cmd) +{ + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); + unsigned int reg, bit; + int ret; + + switch (rk808->variant) { + case RK809_ID: + case RK817_ID: + reg = RK817_SYS_CFG(3); + bit = DEV_RST; + break; + + default: + return NOTIFY_DONE; + } + ret = regmap_update_bits(rk808->regmap, reg, bit, bit); + if (ret) + dev_err(&rk808_i2c_client->dev, "Failed to restart device!\n"); + + return NOTIFY_DONE; +} + +static struct notifier_block rk808_restart_handler = { + .notifier_call = rk808_restart_notify, + .priority = 192, +}; + +static void rk8xx_shutdown(struct i2c_client *client) +{ + struct rk808 *rk808 = i2c_get_clientdata(client); + int ret; + + switch (rk808->variant) { + case RK805_ID: + ret = regmap_update_bits(rk808->regmap, + RK805_GPIO_IO_POL_REG, + SLP_SD_MSK, + SHUTDOWN_FUN); + break; + case RK809_ID: + case RK817_ID: + ret = regmap_update_bits(rk808->regmap, + RK817_SYS_CFG(3), + RK817_SLPPIN_FUNC_MSK, + SLPPIN_DN_FUN); + break; + default: + return; + } + if (ret) + dev_warn(&client->dev, + "Cannot switch to power down function\n"); +} + +static const struct of_device_id rk808_of_match[] = { + { .compatible = "rockchip,rk805" }, + { .compatible = "rockchip,rk808" }, + { .compatible = "rockchip,rk809" }, + { .compatible = "rockchip,rk817" }, + { .compatible = "rockchip,rk818" }, + { }, +}; +MODULE_DEVICE_TABLE(of, rk808_of_match); + +static int rk808_probe(struct i2c_client *client) +{ + struct device_node *np = client->dev.of_node; + struct rk808 *rk808; + const struct rk808_reg_data *pre_init_reg; + const struct mfd_cell *cells; + int nr_pre_init_regs; + int nr_cells; + int msb, lsb; + unsigned char pmic_id_msb, pmic_id_lsb; + int ret; + int i; + + rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL); + if (!rk808) + return -ENOMEM; + + if (of_device_is_compatible(np, "rockchip,rk817") || + of_device_is_compatible(np, "rockchip,rk809")) { + pmic_id_msb = RK817_ID_MSB; + pmic_id_lsb = RK817_ID_LSB; + } else { + pmic_id_msb = RK808_ID_MSB; + pmic_id_lsb = RK808_ID_LSB; + } + + /* Read chip variant */ + msb = i2c_smbus_read_byte_data(client, pmic_id_msb); + if (msb < 0) { + dev_err(&client->dev, "failed to read the chip id at 0x%x\n", + RK808_ID_MSB); + return msb; + } + + lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); + if (lsb < 0) { + dev_err(&client->dev, "failed to read the chip id at 0x%x\n", + RK808_ID_LSB); + return lsb; + } + + rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; + dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); + + switch (rk808->variant) { + case RK805_ID: + rk808->regmap_cfg = &rk805_regmap_config; + rk808->regmap_irq_chip = &rk805_irq_chip; + pre_init_reg = rk805_pre_init_reg; + nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg); + cells = rk805s; + nr_cells = ARRAY_SIZE(rk805s); + break; + case RK808_ID: + rk808->regmap_cfg = &rk808_regmap_config; + rk808->regmap_irq_chip = &rk808_irq_chip; + pre_init_reg = rk808_pre_init_reg; + nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg); + cells = rk808s; + nr_cells = ARRAY_SIZE(rk808s); + break; + case RK818_ID: + rk808->regmap_cfg = &rk818_regmap_config; + rk808->regmap_irq_chip = &rk818_irq_chip; + pre_init_reg = rk818_pre_init_reg; + nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg); + cells = rk818s; + nr_cells = ARRAY_SIZE(rk818s); + break; + case RK809_ID: + case RK817_ID: + rk808->regmap_cfg = &rk817_regmap_config; + rk808->regmap_irq_chip = &rk817_irq_chip; + pre_init_reg = rk817_pre_init_reg; + nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg); + cells = rk817s; + nr_cells = ARRAY_SIZE(rk817s); + break; + default: + dev_err(&client->dev, "Unsupported RK8XX ID %lu\n", + rk808->variant); + return -EINVAL; + } + + rk808->i2c = client; + i2c_set_clientdata(client, rk808); + + rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg); + if (IS_ERR(rk808->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(rk808->regmap); + } + + if (!client->irq) { + dev_err(&client->dev, "No interrupt support, no core IRQ\n"); + return -EINVAL; + } + + ret = regmap_add_irq_chip(rk808->regmap, client->irq, + IRQF_ONESHOT, -1, + rk808->regmap_irq_chip, &rk808->irq_data); + if (ret) { + dev_err(&client->dev, "Failed to add irq_chip %d\n", ret); + return ret; + } + + for (i = 0; i < nr_pre_init_regs; i++) { + ret = regmap_update_bits(rk808->regmap, + pre_init_reg[i].addr, + pre_init_reg[i].mask, + pre_init_reg[i].value); + if (ret) { + dev_err(&client->dev, + "0x%x write err\n", + pre_init_reg[i].addr); + return ret; + } + } + + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + cells, nr_cells, NULL, 0, + regmap_irq_get_domain(rk808->irq_data)); + if (ret) { + dev_err(&client->dev, "failed to add MFD devices %d\n", ret); + goto err_irq; + } + + if (of_property_read_bool(np, "rockchip,system-power-controller")) { + rk808_i2c_client = client; + pm_power_off = rk808_pm_power_off; + + switch (rk808->variant) { + case RK809_ID: + case RK817_ID: + ret = register_restart_handler(&rk808_restart_handler); + if (ret) + dev_warn(&client->dev, "failed to register rst handler, %d\n", ret); + break; + default: + dev_dbg(&client->dev, "pmic controlled board reset not supported\n"); + break; + } + } + + return 0; + +err_irq: + regmap_del_irq_chip(client->irq, rk808->irq_data); + return ret; +} + +static void rk808_remove(struct i2c_client *client) +{ + struct rk808 *rk808 = i2c_get_clientdata(client); + + regmap_del_irq_chip(client->irq, rk808->irq_data); + + /** + * pm_power_off may points to a function from another module. + * Check if the pointer is set by us and only then overwrite it. + */ + if (pm_power_off == rk808_pm_power_off) + pm_power_off = NULL; + + unregister_restart_handler(&rk808_restart_handler); +} + +static int __maybe_unused rk8xx_suspend(struct device *dev) +{ + struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev)); + int ret = 0; + + switch (rk808->variant) { + case RK805_ID: + ret = regmap_update_bits(rk808->regmap, + RK805_GPIO_IO_POL_REG, + SLP_SD_MSK, + SLEEP_FUN); + break; + case RK809_ID: + case RK817_ID: + ret = regmap_update_bits(rk808->regmap, + RK817_SYS_CFG(3), + RK817_SLPPIN_FUNC_MSK, + SLPPIN_SLP_FUN); + break; + default: + break; + } + + return ret; +} + +static int __maybe_unused rk8xx_resume(struct device *dev) +{ + struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev)); + int ret = 0; + + switch (rk808->variant) { + case RK809_ID: + case RK817_ID: + ret = regmap_update_bits(rk808->regmap, + RK817_SYS_CFG(3), + RK817_SLPPIN_FUNC_MSK, + SLPPIN_NULL_FUN); + break; + default: + break; + } + + return ret; +} +static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume); + +static struct i2c_driver rk808_i2c_driver = { + .driver = { + .name = "rk808", + .of_match_table = rk808_of_match, + .pm = &rk8xx_pm_ops, + }, + .probe_new = rk808_probe, + .remove = rk808_remove, + .shutdown = rk8xx_shutdown, +}; + +module_i2c_driver(rk808_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Chris Zhong "); +MODULE_AUTHOR("Zhang Qing "); +MODULE_AUTHOR("Wadim Egorov "); +MODULE_DESCRIPTION("RK808/RK818 PMIC driver"); -- cgit v1.2.3