From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mfd/sprd-sc27xx-spi.c | 278 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 drivers/mfd/sprd-sc27xx-spi.c (limited to 'drivers/mfd/sprd-sc27xx-spi.c') diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c new file mode 100644 index 000000000..d21f32cc7 --- /dev/null +++ b/drivers/mfd/sprd-sc27xx-spi.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2017 Spreadtrum Communications Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPRD_PMIC_INT_MASK_STATUS 0x0 +#define SPRD_PMIC_INT_RAW_STATUS 0x4 +#define SPRD_PMIC_INT_EN 0x8 + +#define SPRD_SC2730_IRQ_BASE 0x80 +#define SPRD_SC2730_IRQ_NUMS 10 +#define SPRD_SC2730_CHG_DET 0x1b9c +#define SPRD_SC2731_IRQ_BASE 0x140 +#define SPRD_SC2731_IRQ_NUMS 16 +#define SPRD_SC2731_CHG_DET 0xedc + +/* PMIC charger detection definition */ +#define SPRD_PMIC_CHG_DET_DELAY_US 200000 +#define SPRD_PMIC_CHG_DET_TIMEOUT 2000000 +#define SPRD_PMIC_CHG_DET_DONE BIT(11) +#define SPRD_PMIC_SDP_TYPE BIT(7) +#define SPRD_PMIC_DCP_TYPE BIT(6) +#define SPRD_PMIC_CDP_TYPE BIT(5) +#define SPRD_PMIC_CHG_TYPE_MASK GENMASK(7, 5) + +struct sprd_pmic { + struct regmap *regmap; + struct device *dev; + struct regmap_irq *irqs; + struct regmap_irq_chip irq_chip; + struct regmap_irq_chip_data *irq_data; + const struct sprd_pmic_data *pdata; + int irq; +}; + +struct sprd_pmic_data { + u32 irq_base; + u32 num_irqs; + u32 charger_det; +}; + +/* + * Since different PMICs of SC27xx series can have different interrupt + * base address and irq number, we should save irq number and irq base + * in the device data structure. + */ +static const struct sprd_pmic_data sc2730_data = { + .irq_base = SPRD_SC2730_IRQ_BASE, + .num_irqs = SPRD_SC2730_IRQ_NUMS, + .charger_det = SPRD_SC2730_CHG_DET, +}; + +static const struct sprd_pmic_data sc2731_data = { + .irq_base = SPRD_SC2731_IRQ_BASE, + .num_irqs = SPRD_SC2731_IRQ_NUMS, + .charger_det = SPRD_SC2731_CHG_DET, +}; + +enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct sprd_pmic *ddata = spi_get_drvdata(spi); + const struct sprd_pmic_data *pdata = ddata->pdata; + enum usb_charger_type type; + u32 val; + int ret; + + ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val, + (val & SPRD_PMIC_CHG_DET_DONE), + SPRD_PMIC_CHG_DET_DELAY_US, + SPRD_PMIC_CHG_DET_TIMEOUT); + if (ret) { + dev_err(&spi->dev, "failed to detect charger type\n"); + return UNKNOWN_TYPE; + } + + switch (val & SPRD_PMIC_CHG_TYPE_MASK) { + case SPRD_PMIC_CDP_TYPE: + type = CDP_TYPE; + break; + case SPRD_PMIC_DCP_TYPE: + type = DCP_TYPE; + break; + case SPRD_PMIC_SDP_TYPE: + type = SDP_TYPE; + break; + default: + type = UNKNOWN_TYPE; + break; + } + + return type; +} +EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type); + +static int sprd_pmic_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + return spi_write(spi, data, count); +} + +static int sprd_pmic_spi_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u32 rx_buf[2] = { 0 }; + int ret; + + /* Now we only support one PMIC register to read every time. */ + if (reg_size != sizeof(u32) || val_size != sizeof(u32)) + return -EINVAL; + + /* Copy address to read from into first element of SPI buffer. */ + memcpy(rx_buf, reg, sizeof(u32)); + ret = spi_read(spi, rx_buf, 1); + if (ret < 0) + return ret; + + memcpy(val, rx_buf, val_size); + return 0; +} + +static struct regmap_bus sprd_pmic_regmap = { + .write = sprd_pmic_spi_write, + .read = sprd_pmic_spi_read, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static const struct regmap_config sprd_pmic_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0xffff, +}; + +static int sprd_pmic_probe(struct spi_device *spi) +{ + struct sprd_pmic *ddata; + const struct sprd_pmic_data *pdata; + int ret, i; + + pdata = of_device_get_match_data(&spi->dev); + if (!pdata) { + dev_err(&spi->dev, "No matching driver data found\n"); + return -EINVAL; + } + + ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap, + &spi->dev, &sprd_pmic_config); + if (IS_ERR(ddata->regmap)) { + ret = PTR_ERR(ddata->regmap); + dev_err(&spi->dev, "Failed to allocate register map %d\n", ret); + return ret; + } + + spi_set_drvdata(spi, ddata); + ddata->dev = &spi->dev; + ddata->irq = spi->irq; + ddata->pdata = pdata; + + ddata->irq_chip.name = dev_name(&spi->dev); + ddata->irq_chip.status_base = + pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS; + ddata->irq_chip.unmask_base = pdata->irq_base + SPRD_PMIC_INT_EN; + ddata->irq_chip.ack_base = 0; + ddata->irq_chip.num_regs = 1; + ddata->irq_chip.num_irqs = pdata->num_irqs; + + ddata->irqs = devm_kcalloc(&spi->dev, + pdata->num_irqs, sizeof(struct regmap_irq), + GFP_KERNEL); + if (!ddata->irqs) + return -ENOMEM; + + ddata->irq_chip.irqs = ddata->irqs; + for (i = 0; i < pdata->num_irqs; i++) + ddata->irqs[i].mask = BIT(i); + + ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq, + IRQF_ONESHOT, 0, + &ddata->irq_chip, &ddata->irq_data); + if (ret) { + dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret); + return ret; + } + + ret = devm_of_platform_populate(&spi->dev); + if (ret) { + dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret); + return ret; + } + + device_init_wakeup(&spi->dev, true); + return 0; +} + +static int sprd_pmic_suspend(struct device *dev) +{ + struct sprd_pmic *ddata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(ddata->irq); + + return 0; +} + +static int sprd_pmic_resume(struct device *dev) +{ + struct sprd_pmic *ddata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(ddata->irq); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, + sprd_pmic_suspend, sprd_pmic_resume); + +static const struct of_device_id sprd_pmic_match[] = { + { .compatible = "sprd,sc2730", .data = &sc2730_data }, + { .compatible = "sprd,sc2731", .data = &sc2731_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, sprd_pmic_match); + +static const struct spi_device_id sprd_pmic_spi_ids[] = { + { .name = "sc2730", .driver_data = (unsigned long)&sc2730_data }, + { .name = "sc2731", .driver_data = (unsigned long)&sc2731_data }, + {}, +}; +MODULE_DEVICE_TABLE(spi, sprd_pmic_spi_ids); + +static struct spi_driver sprd_pmic_driver = { + .driver = { + .name = "sc27xx-pmic", + .of_match_table = sprd_pmic_match, + .pm = pm_sleep_ptr(&sprd_pmic_pm_ops), + }, + .probe = sprd_pmic_probe, + .id_table = sprd_pmic_spi_ids, +}; + +static int __init sprd_pmic_init(void) +{ + return spi_register_driver(&sprd_pmic_driver); +} +subsys_initcall(sprd_pmic_init); + +static void __exit sprd_pmic_exit(void) +{ + spi_unregister_driver(&sprd_pmic_driver); +} +module_exit(sprd_pmic_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver"); +MODULE_AUTHOR("Baolin Wang "); -- cgit v1.2.3