From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/misc/Kconfig | 539 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 539 insertions(+) create mode 100644 drivers/misc/Kconfig (limited to 'drivers/misc/Kconfig') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig new file mode 100644 index 000000000..9947b7892 --- /dev/null +++ b/drivers/misc/Kconfig @@ -0,0 +1,539 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Misc strange devices +# + +menu "Misc devices" + +config SENSORS_LIS3LV02D + tristate + depends on INPUT + +config AD525X_DPOT + tristate "Analog Devices Digital Potentiometers" + depends on (I2C || SPI) && SYSFS + help + If you say yes here, you get support for the Analog Devices + AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 + AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, + AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, + AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, + AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, + AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, + ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, + AD5271, AD5272, AD5274 + digital potentiometer chips. + + See Documentation/misc-devices/ad525x_dpot.rst for the + userspace interface. + + This driver can also be built as a module. If so, the module + will be called ad525x_dpot. + +config AD525X_DPOT_I2C + tristate "support I2C bus connection" + depends on AD525X_DPOT && I2C + help + Say Y here if you have a digital potentiometers hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-i2c. + +config AD525X_DPOT_SPI + tristate "support SPI bus connection" + depends on AD525X_DPOT && SPI_MASTER + help + Say Y here if you have a digital potentiometers hooked to an SPI bus. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-spi. + +config DUMMY_IRQ + tristate "Dummy IRQ handler" + help + This module accepts a single 'irq' parameter, which it should register for. + The sole purpose of this module is to help with debugging of systems on + which spurious IRQs would happen on disabled IRQ vector. + +config IBM_ASM + tristate "Device driver for IBM RSA service processor" + depends on X86 && PCI && INPUT + depends on SERIAL_8250 || SERIAL_8250=n + help + This option enables device driver support for in-band access to the + IBM RSA (Condor) service processor in eServer xSeries systems. + The ibmasm device driver allows user space application to access + ASM (Advanced Systems Management) functions on the service + processor. The driver is meant to be used in conjunction with + a user space API. + The ibmasm driver also enables the OS to use the UART on the + service processor board as a regular serial port. To make use of + this feature serial driver support (CONFIG_SERIAL_8250) must be + enabled. + + WARNING: This software may not be supported or function + correctly on your IBM server. Please consult the IBM ServerProven + website + for information on the specific driver level and support statement + for your IBM server. + +config IBMVMC + tristate "IBM Virtual Management Channel support" + depends on PPC_PSERIES + help + This is the IBM POWER Virtual Management Channel + + This driver is to be used for the POWER Virtual + Management Channel virtual adapter on the PowerVM + platform. It provides both request/response and + async message support through the /dev/ibmvmc node. + + To compile this driver as a module, choose M here: the + module will be called ibmvmc. + +config PHANTOM + tristate "Sensable PHANToM (PCI)" + depends on PCI + help + Say Y here if you want to build a driver for Sensable PHANToM device. + + This driver is only for PCI PHANToMs. + + If you choose to build module, its name will be phantom. If unsure, + say N here. + +config TIFM_CORE + tristate "TI Flash Media interface support" + depends on PCI + help + If you want support for Texas Instruments(R) Flash Media adapters + you should select this option and then also choose an appropriate + host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter + support', if you have a TI PCI74xx compatible card reader, for + example. + You will also have to select some flash card format drivers. MMC/SD + cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD + Interface support (MMC_TIFM_SD)'. + + To compile this driver as a module, choose M here: the module will + be called tifm_core. + +config TIFM_7XX1 + tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" + depends on PCI && TIFM_CORE + default TIFM_CORE + help + This option enables support for Texas Instruments(R) PCI74xx and + PCI76xx families of Flash Media adapters, found in many laptops. + To make actual use of the device, you will have to select some + flash card format drivers, as outlined in the TIFM_CORE Help. + + To compile this driver as a module, choose M here: the module will + be called tifm_7xx1. + +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + +config ATMEL_SSC + tristate "Device driver for Atmel SSC peripheral" + depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST) + help + This option enables device driver support for Atmel Synchronized + Serial Communication peripheral (SSC). + + The SSC peripheral supports a wide variety of serial frame based + communications, i.e. I2S, SPI, etc. + + If unsure, say N. + +config ENCLOSURE_SERVICES + tristate "Enclosure Services" + help + Provides support for intelligent enclosures (bays which + contain storage devices). You also need either a host + driver (SCSI/ATA) which supports enclosures + or a SCSI enclosure device (SES) to use these services. + +config SGI_XP + tristate "Support communication between SGI SSIs" + depends on NET + depends on (IA64_SGI_UV || X86_UV) && SMP + depends on X86_64 || BROKEN + select SGI_GRU if X86_64 && SMP + help + An SGI machine can be divided into multiple Single System + Images which act independently of each other and have + hardware based memory protection from the others. Enabling + this feature will allow for direct communication between SSIs + based on a network adapter and DMA messaging. + +config SMPRO_ERRMON + tristate "Ampere Computing SMPro error monitor driver" + depends on MFD_SMPRO || COMPILE_TEST + help + Say Y here to get support for the SMpro error monitor function + provided by Ampere Computing's Altra and Altra Max SoCs. Upon + loading, the driver creates sysfs files which can be use to gather + multiple HW error data reported via read and write system calls. + + To compile this driver as a module, say M here. The driver will be + called smpro-errmon. + +config SMPRO_MISC + tristate "Ampere Computing SMPro miscellaneous driver" + depends on MFD_SMPRO || COMPILE_TEST + help + Say Y here to get support for the SMpro error miscellalenous function + provided by Ampere Computing's Altra and Altra Max SoCs. + + To compile this driver as a module, say M here. The driver will be + called smpro-misc. + +config CS5535_MFGPT + tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" + depends on MFD_CS5535 + help + This driver provides access to MFGPT functionality for other + drivers that need timers. MFGPTs are available in the CS5535 and + CS5536 companion chips that are found in AMD Geode and several + other platforms. They have a better resolution and max interval + than the generic PIT, and are suitable for use as high-res timers. + You probably don't want to enable this manually; other drivers that + make use of it should enable it. + +config CS5535_MFGPT_DEFAULT_IRQ + int + depends on CS5535_MFGPT + default 7 + help + MFGPTs on the CS5535 require an interrupt. The selected IRQ + can be overridden as a module option as well as by driver that + use the cs5535_mfgpt_ API; however, different architectures might + want to use a different IRQ by default. This is here for + architectures to set as necessary. + +config CS5535_CLOCK_EVENT_SRC + tristate "CS5535/CS5536 high-res timer (MFGPT) events" + depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT + help + This driver provides a clock event source based on the MFGPT + timer(s) in the CS5535 and CS5536 companion chips. + MFGPTs have a better resolution and max interval than the + generic PIT, and are suitable for use as high-res timers. + +config GEHC_ACHC + tristate "GEHC ACHC support" + depends on SPI && SYSFS + depends on SOC_IMX53 || COMPILE_TEST + select FW_LOADER + help + Support for GE ACHC microcontroller, that is part of the GE + PPD device. + + To compile this driver as a module, choose M here: the + module will be called gehc-achc. + +config HI6421V600_IRQ + tristate "HiSilicon Hi6421v600 IRQ and powerkey" + depends on OF + depends on SPMI + depends on HAS_IOMEM + select MFD_CORE + select REGMAP_SPMI + help + This driver provides IRQ handling for Hi6421v600, used on + some Kirin chipsets, like the one at Hikey 970. + +config HP_ILO + tristate "Channel interface driver for the HP iLO processor" + depends on PCI + help + The channel interface driver allows applications to communicate + with iLO management processors present on HP ProLiant servers. + Upon loading, the driver creates /dev/hpilo/dXccbN files, which + can be used to gather data from the management processor, via + read and write system calls. + + To compile this driver as a module, choose M here: the + module will be called hpilo. + +config QCOM_COINCELL + tristate "Qualcomm coincell charger support" + depends on MFD_SPMI_PMIC || COMPILE_TEST + help + This driver supports the coincell block found inside of + Qualcomm PMICs. The coincell charger provides a means to + charge a coincell battery or backup capacitor which is used + to maintain PMIC register and RTC state in the absence of + external power. + +config QCOM_FASTRPC + tristate "Qualcomm FastRPC" + depends on ARCH_QCOM || COMPILE_TEST + depends on RPMSG + select DMA_SHARED_BUFFER + select QCOM_SCM + help + Provides a communication mechanism that allows for clients to + make remote method invocations across processor boundary to + applications DSP processor. Say M if you want to enable this + module. + +config SGI_GRU + tristate "SGI GRU driver" + depends on X86_UV && SMP + select MMU_NOTIFIER + help + The GRU is a hardware resource located in the system chipset. The GRU + contains memory that can be mmapped into the user address space. This memory is + used to communicate with the GRU to perform functions such as load/store, + scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user + instructions using user virtual addresses. GRU instructions (ex., bcopy) use + user virtual addresses for operands. + + If you are not running on a SGI UV system, say N. + +config SGI_GRU_DEBUG + bool "SGI GRU driver debug" + depends on SGI_GRU + help + This option enables additional debugging code for the SGI GRU driver. + If you are unsure, say N. + +config APDS9802ALS + tristate "Medfield Avago APDS9802 ALS Sensor module" + depends on I2C + help + If you say yes here you get support for the ALS APDS9802 ambient + light sensor. + + This driver can also be built as a module. If so, the module + will be called apds9802als. + +config ISL29003 + tristate "Intersil ISL29003 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Intersil ISL29003 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29003. + +config ISL29020 + tristate "Intersil ISL29020 ambient light sensor" + depends on I2C + help + If you say yes here you get support for the Intersil ISL29020 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29020. + +config SENSORS_TSL2550 + tristate "Taos TSL2550 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Taos TSL2550 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called tsl2550. + +config SENSORS_BH1770 + tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" + depends on I2C + help + Say Y here if you want to build a driver for BH1770GLC (ROHM) or + SFH7770 (Osram) combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called bh1770glc. If unsure, say N here. + +config SENSORS_APDS990X + tristate "APDS990X combined als and proximity sensors" + depends on I2C + help + Say Y here if you want to build a driver for Avago APDS990x + combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called apds990x. If unsure, say N here. + +config HMC6352 + tristate "Honeywell HMC6352 compass" + depends on I2C + help + This driver provides support for the Honeywell HMC6352 compass, + providing configuration and heading data via sysfs. + +config DS1682 + tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" + depends on I2C + help + If you say yes here you get support for Dallas Semiconductor + DS1682 Total Elapsed Time Recorder. + + This driver can also be built as a module. If so, the module + will be called ds1682. + +config VMWARE_BALLOON + tristate "VMware Balloon Driver" + depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST + select MEMORY_BALLOON + help + This is VMware physical memory management driver which acts + like a "balloon" that can be inflated to reclaim physical pages + by reserving them in the guest and invalidating them in the + monitor, freeing up the underlying machine pages so they can + be allocated to other guests. The balloon can also be deflated + to allow the guest to use more physical memory. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmw_balloon. + +config PCH_PHUB + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" + select GENERIC_NET_UTILS + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) + help + This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of + Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded + processor. The Topcliff has MAC address and Option ROM data in SROM. + This driver can access MAC address and Option ROM data in SROM. + + This driver also can be used for LAPIS Semiconductor's IOH, + ML7213/ML7223/ML7831. + ML7213 which is for IVI(In-Vehicle Infotainment) use. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + + To compile this driver as a module, choose M here: the module will + be called pch_phub. + +config LATTICE_ECP3_CONFIG + tristate "Lattice ECP3 FPGA bitstream configuration via SPI" + depends on SPI && SYSFS + select FW_LOADER + default n + help + This option enables support for bitstream configuration (programming + or loading) of the Lattice ECP3 FPGA family via SPI. + + If unsure, say N. + +config SRAM + bool "Generic on-chip SRAM driver" + depends on HAS_IOMEM + select GENERIC_ALLOCATOR + select SRAM_EXEC if ARM + help + This driver allows you to declare a memory region to be managed by + the genalloc API. It is supposed to be used for small on-chip SRAM + areas found on many SoCs. + +config SRAM_EXEC + bool + +config DW_XDATA_PCIE + depends on PCI + tristate "Synopsys DesignWare xData PCIe driver" + help + This driver allows controlling Synopsys DesignWare PCIe traffic + generator IP also known as xData, present in Synopsys DesignWare + PCIe Endpoint prototype. + + If unsure, say N. + +config PCI_ENDPOINT_TEST + depends on PCI + select CRC32 + tristate "PCI Endpoint Test driver" + help + Enable this configuration option to enable the host side test driver + for PCI Endpoint. + +config XILINX_SDFEC + tristate "Xilinx SDFEC 16" + depends on HAS_IOMEM + help + This option enables support for the Xilinx SDFEC (Soft Decision + Forward Error Correction) driver. This enables a char driver + for the SDFEC. + + You may select this driver if your design instantiates the + SDFEC(16nm) hardened block. To compile this as a module choose M. + + If unsure, say N. + +config MISC_RTSX + tristate + default MISC_RTSX_PCI || MISC_RTSX_USB + +config HISI_HIKEY_USB + tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform" + depends on (OF && GPIOLIB) || COMPILE_TEST + depends on USB_ROLE_SWITCH + help + If you say yes here this adds support for the on-board USB GPIO hub + found on HiKey 960/970 boards, which is necessary to support + switching between the dual-role USB-C port and the USB-A host ports + using only one USB controller. + +config OPEN_DICE + tristate "Open Profile for DICE driver" + depends on OF_RESERVED_MEM + help + This driver exposes a DICE reserved memory region to userspace via + a character device. The memory region contains Compound Device + Identifiers (CDIs) generated by firmware as an output of DICE + measured boot flow. Userspace can use CDIs for remote attestation + and sealing. + + If unsure, say N. + +config VCPU_STALL_DETECTOR + tristate "Guest vCPU stall detector" + depends on OF && HAS_IOMEM + help + When this driver is bound inside a KVM guest, it will + periodically "pet" an MMIO stall detector device from each vCPU + and allow the host to detect vCPU stalls. + + To compile this driver as a module, choose M here: the module + will be called vcpu_stall_detector. + + If you do not intend to run this kernel as a guest, say N. + +source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" +source "drivers/misc/cb710/Kconfig" +source "drivers/misc/ti-st/Kconfig" +source "drivers/misc/lis3lv02d/Kconfig" +source "drivers/misc/altera-stapl/Kconfig" +source "drivers/misc/mei/Kconfig" +source "drivers/misc/vmw_vmci/Kconfig" +source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/echo/Kconfig" +source "drivers/misc/cxl/Kconfig" +source "drivers/misc/ocxl/Kconfig" +source "drivers/misc/bcm-vk/Kconfig" +source "drivers/misc/cardreader/Kconfig" +source "drivers/misc/habanalabs/Kconfig" +source "drivers/misc/uacce/Kconfig" +source "drivers/misc/pvpanic/Kconfig" +source "drivers/misc/mchp_pci1xxxx/Kconfig" +endmenu -- cgit v1.2.3