From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/misc/eeprom/eeprom_93cx6.c | 372 +++++++++++++++++++++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 drivers/misc/eeprom/eeprom_93cx6.c (limited to 'drivers/misc/eeprom/eeprom_93cx6.c') diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c new file mode 100644 index 000000000..9627294fe --- /dev/null +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project + * + * + * Module: eeprom_93cx6 + * Abstract: EEPROM reader routines for 93cx6 chipsets. + * Supported chipsets: 93c46 & 93c66. + */ + +#include +#include +#include +#include + +MODULE_AUTHOR("http://rt2x00.serialmonkey.com"); +MODULE_VERSION("1.0"); +MODULE_DESCRIPTION("EEPROM 93cx6 chip driver"); +MODULE_LICENSE("GPL"); + +static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom) +{ + eeprom->reg_data_clock = 1; + eeprom->register_write(eeprom); + + /* + * Add a short delay for the pulse to work. + * According to the specifications the "maximum minimum" + * time should be 450ns. + */ + ndelay(450); +} + +static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom) +{ + eeprom->reg_data_clock = 0; + eeprom->register_write(eeprom); + + /* + * Add a short delay for the pulse to work. + * According to the specifications the "maximum minimum" + * time should be 450ns. + */ + ndelay(450); +} + +static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom) +{ + /* + * Clear all flags, and enable chip select. + */ + eeprom->register_read(eeprom); + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + eeprom->reg_data_clock = 0; + eeprom->reg_chip_select = 1; + eeprom->drive_data = 1; + eeprom->register_write(eeprom); + + /* + * kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); +} + +static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom) +{ + /* + * Clear chip_select and data_in flags. + */ + eeprom->register_read(eeprom); + eeprom->reg_data_in = 0; + eeprom->reg_chip_select = 0; + eeprom->register_write(eeprom); + + /* + * kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); +} + +static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom, + const u16 data, const u16 count) +{ + unsigned int i; + + eeprom->register_read(eeprom); + + /* + * Clear data flags. + */ + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + eeprom->drive_data = 1; + + /* + * Start writing all bits. + */ + for (i = count; i > 0; i--) { + /* + * Check if this bit needs to be set. + */ + eeprom->reg_data_in = !!(data & (1 << (i - 1))); + + /* + * Write the bit to the eeprom register. + */ + eeprom->register_write(eeprom); + + /* + * Kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + + eeprom->reg_data_in = 0; + eeprom->register_write(eeprom); +} + +static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom, + u16 *data, const u16 count) +{ + unsigned int i; + u16 buf = 0; + + eeprom->register_read(eeprom); + + /* + * Clear data flags. + */ + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + eeprom->drive_data = 0; + + /* + * Start reading all bits. + */ + for (i = count; i > 0; i--) { + eeprom_93cx6_pulse_high(eeprom); + + eeprom->register_read(eeprom); + + /* + * Clear data_in flag. + */ + eeprom->reg_data_in = 0; + + /* + * Read if the bit has been set. + */ + if (eeprom->reg_data_out) + buf |= (1 << (i - 1)); + + eeprom_93cx6_pulse_low(eeprom); + } + + *data = buf; +} + +/** + * eeprom_93cx6_read - Read a word from eeprom + * @eeprom: Pointer to eeprom structure + * @word: Word index from where we should start reading + * @data: target pointer where the information will have to be stored + * + * This function will read the eeprom data as host-endian word + * into the given data pointer. + */ +void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, + u16 *data) +{ + u16 command; + + /* + * Initialize the eeprom register + */ + eeprom_93cx6_startup(eeprom); + + /* + * Select the read opcode and the word to be read. + */ + command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word; + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + /* + * Read the requested 16 bits. + */ + eeprom_93cx6_read_bits(eeprom, data, 16); + + /* + * Cleanup eeprom register. + */ + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_read); + +/** + * eeprom_93cx6_multiread - Read multiple words from eeprom + * @eeprom: Pointer to eeprom structure + * @word: Word index from where we should start reading + * @data: target pointer where the information will have to be stored + * @words: Number of words that should be read. + * + * This function will read all requested words from the eeprom, + * this is done by calling eeprom_93cx6_read() multiple times. + * But with the additional change that while the eeprom_93cx6_read + * will return host ordered bytes, this method will return little + * endian words. + */ +void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word, + __le16 *data, const u16 words) +{ + unsigned int i; + u16 tmp; + + for (i = 0; i < words; i++) { + tmp = 0; + eeprom_93cx6_read(eeprom, word + i, &tmp); + data[i] = cpu_to_le16(tmp); + } +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread); + +/** + * eeprom_93cx6_readb - Read a byte from eeprom + * @eeprom: Pointer to eeprom structure + * @byte: Byte index from where we should start reading + * @data: target pointer where the information will have to be stored + * + * This function will read a byte of the eeprom data + * into the given data pointer. + */ +void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte, + u8 *data) +{ + u16 command; + u16 tmp; + + /* + * Initialize the eeprom register + */ + eeprom_93cx6_startup(eeprom); + + /* + * Select the read opcode and the byte to be read. + */ + command = (PCI_EEPROM_READ_OPCODE << (eeprom->width + 1)) | byte; + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1); + + /* + * Read the requested 8 bits. + */ + eeprom_93cx6_read_bits(eeprom, &tmp, 8); + *data = tmp & 0xff; + + /* + * Cleanup eeprom register. + */ + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_readb); + +/** + * eeprom_93cx6_multireadb - Read multiple bytes from eeprom + * @eeprom: Pointer to eeprom structure + * @byte: Index from where we should start reading + * @data: target pointer where the information will have to be stored + * @bytes: Number of bytes that should be read. + * + * This function will read all requested bytes from the eeprom, + * this is done by calling eeprom_93cx6_readb() multiple times. + */ +void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom, const u8 byte, + u8 *data, const u16 bytes) +{ + unsigned int i; + + for (i = 0; i < bytes; i++) + eeprom_93cx6_readb(eeprom, byte + i, &data[i]); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_multireadb); + +/** + * eeprom_93cx6_wren - set the write enable state + * @eeprom: Pointer to eeprom structure + * @enable: true to enable writes, otherwise disable writes + * + * Set the EEPROM write enable state to either allow or deny + * writes depending on the @enable value. + */ +void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable) +{ + u16 command; + + /* start the command */ + eeprom_93cx6_startup(eeprom); + + /* create command to enable/disable */ + + command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE; + command <<= (eeprom->width - 2); + + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_wren); + +/** + * eeprom_93cx6_write - write data to the EEPROM + * @eeprom: Pointer to eeprom structure + * @addr: Address to write data to. + * @data: The data to write to address @addr. + * + * Write the @data to the specified @addr in the EEPROM and + * waiting for the device to finish writing. + * + * Note, since we do not expect large number of write operations + * we delay in between parts of the operation to avoid using excessive + * amounts of CPU time busy waiting. + */ +void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data) +{ + int timeout = 100; + u16 command; + + /* start the command */ + eeprom_93cx6_startup(eeprom); + + command = PCI_EEPROM_WRITE_OPCODE << eeprom->width; + command |= addr; + + /* send write command */ + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + /* send data */ + eeprom_93cx6_write_bits(eeprom, data, 16); + + /* get ready to check for busy */ + eeprom->drive_data = 0; + eeprom->reg_chip_select = 1; + eeprom->register_write(eeprom); + + /* wait at-least 250ns to get DO to be the busy signal */ + usleep_range(1000, 2000); + + /* wait for DO to go high to signify finish */ + + while (true) { + eeprom->register_read(eeprom); + + if (eeprom->reg_data_out) + break; + + usleep_range(1000, 2000); + + if (--timeout <= 0) { + printk(KERN_ERR "%s: timeout\n", __func__); + break; + } + } + + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_write); -- cgit v1.2.3