From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/misc/lattice-ecp3-config.c | 242 +++++++++++++++++++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 drivers/misc/lattice-ecp3-config.c (limited to 'drivers/misc/lattice-ecp3-config.c') diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c new file mode 100644 index 000000000..bac4df2e5 --- /dev/null +++ b/drivers/misc/lattice-ecp3-config.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2012 Stefan Roese + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FIRMWARE_NAME "lattice-ecp3.bit" + +/* + * The JTAG ID's of the supported FPGA's. The ID is 32bit wide + * reversed as noted in the manual. + */ +#define ID_ECP3_17 0xc2088080 +#define ID_ECP3_35 0xc2048080 + +/* FPGA commands */ +#define FPGA_CMD_READ_ID 0x07 /* plus 24 bits */ +#define FPGA_CMD_READ_STATUS 0x09 /* plus 24 bits */ +#define FPGA_CMD_CLEAR 0x70 +#define FPGA_CMD_REFRESH 0x71 +#define FPGA_CMD_WRITE_EN 0x4a /* plus 2 bits */ +#define FPGA_CMD_WRITE_DIS 0x4f /* plus 8 bits */ +#define FPGA_CMD_WRITE_INC 0x41 /* plus 0 bits */ + +/* + * The status register is 32bit revered, DONE is bit 17 from the TN1222.pdf + * (LatticeECP3 Slave SPI Port User's Guide) + */ +#define FPGA_STATUS_DONE 0x00004000 +#define FPGA_STATUS_CLEARED 0x00010000 + +#define FPGA_CLEAR_TIMEOUT 5000 /* max. 5000ms for FPGA clear */ +#define FPGA_CLEAR_MSLEEP 10 +#define FPGA_CLEAR_LOOP_COUNT (FPGA_CLEAR_TIMEOUT / FPGA_CLEAR_MSLEEP) + +struct fpga_data { + struct completion fw_loaded; +}; + +struct ecp3_dev { + u32 jedec_id; + char *name; +}; + +static const struct ecp3_dev ecp3_dev[] = { + { + .jedec_id = ID_ECP3_17, + .name = "Lattice ECP3-17", + }, + { + .jedec_id = ID_ECP3_35, + .name = "Lattice ECP3-35", + }, +}; + +static void firmware_load(const struct firmware *fw, void *context) +{ + struct spi_device *spi = (struct spi_device *)context; + struct fpga_data *data = spi_get_drvdata(spi); + u8 *buffer; + u8 txbuf[8]; + u8 rxbuf[8]; + int rx_len = 8; + int i; + u32 jedec_id; + u32 status; + + if (fw == NULL) { + dev_err(&spi->dev, "Cannot load firmware, aborting\n"); + goto out; + } + + if (fw->size == 0) { + dev_err(&spi->dev, "Error: Firmware size is 0!\n"); + goto out; + } + + /* Fill dummy data (24 stuffing bits for commands) */ + txbuf[1] = 0x00; + txbuf[2] = 0x00; + txbuf[3] = 0x00; + + /* Trying to speak with the FPGA via SPI... */ + txbuf[0] = FPGA_CMD_READ_ID; + spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + jedec_id = get_unaligned_be32(&rxbuf[4]); + dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id); + + for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) { + if (jedec_id == ecp3_dev[i].jedec_id) + break; + } + if (i == ARRAY_SIZE(ecp3_dev)) { + dev_err(&spi->dev, + "Error: No supported FPGA detected (JEDEC_ID=%08x)!\n", + jedec_id); + goto out; + } + + dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name); + + txbuf[0] = FPGA_CMD_READ_STATUS; + spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + status = get_unaligned_be32(&rxbuf[4]); + dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); + + buffer = kzalloc(fw->size + 8, GFP_KERNEL); + if (!buffer) { + dev_err(&spi->dev, "Error: Can't allocate memory!\n"); + goto out; + } + + /* + * Insert WRITE_INC command into stream (one SPI frame) + */ + buffer[0] = FPGA_CMD_WRITE_INC; + buffer[1] = 0xff; + buffer[2] = 0xff; + buffer[3] = 0xff; + memcpy(buffer + 4, fw->data, fw->size); + + txbuf[0] = FPGA_CMD_REFRESH; + spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_WRITE_EN; + spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_CLEAR; + spi_write(spi, txbuf, 4); + + /* + * Wait for FPGA memory to become cleared + */ + for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) { + txbuf[0] = FPGA_CMD_READ_STATUS; + spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + status = get_unaligned_be32(&rxbuf[4]); + if (status == FPGA_STATUS_CLEARED) + break; + + msleep(FPGA_CLEAR_MSLEEP); + } + + if (i == FPGA_CLEAR_LOOP_COUNT) { + dev_err(&spi->dev, + "Error: Timeout waiting for FPGA to clear (status=%08x)!\n", + status); + kfree(buffer); + goto out; + } + + dev_info(&spi->dev, "Configuring the FPGA...\n"); + spi_write(spi, buffer, fw->size + 8); + + txbuf[0] = FPGA_CMD_WRITE_DIS; + spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_READ_STATUS; + spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + status = get_unaligned_be32(&rxbuf[4]); + dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); + + /* Check result */ + if (status & FPGA_STATUS_DONE) + dev_info(&spi->dev, "FPGA successfully configured!\n"); + else + dev_info(&spi->dev, "FPGA not configured (DONE not set)\n"); + + /* + * Don't forget to release the firmware again + */ + release_firmware(fw); + + kfree(buffer); +out: + complete(&data->fw_loaded); +} + +static int lattice_ecp3_probe(struct spi_device *spi) +{ + struct fpga_data *data; + int err; + + data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&spi->dev, "Memory allocation for fpga_data failed\n"); + return -ENOMEM; + } + spi_set_drvdata(spi, data); + + init_completion(&data->fw_loaded); + err = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + FIRMWARE_NAME, &spi->dev, + GFP_KERNEL, spi, firmware_load); + if (err) { + dev_err(&spi->dev, "Firmware loading failed with %d!\n", err); + return err; + } + + dev_info(&spi->dev, "FPGA bitstream configuration driver registered\n"); + + return 0; +} + +static void lattice_ecp3_remove(struct spi_device *spi) +{ + struct fpga_data *data = spi_get_drvdata(spi); + + wait_for_completion(&data->fw_loaded); +} + +static const struct spi_device_id lattice_ecp3_id[] = { + { "ecp3-17", 0 }, + { "ecp3-35", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, lattice_ecp3_id); + +static struct spi_driver lattice_ecp3_driver = { + .driver = { + .name = "lattice-ecp3", + }, + .probe = lattice_ecp3_probe, + .remove = lattice_ecp3_remove, + .id_table = lattice_ecp3_id, +}; + +module_spi_driver(lattice_ecp3_driver); + +MODULE_AUTHOR("Stefan Roese "); +MODULE_DESCRIPTION("Lattice ECP3 FPGA configuration via SPI"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE_NAME); -- cgit v1.2.3