From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mmc/core/sdio_ops.c | 217 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 drivers/mmc/core/sdio_ops.c (limited to 'drivers/mmc/core/sdio_ops.c') diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c new file mode 100644 index 000000000..4c229dd2b --- /dev/null +++ b/drivers/mmc/core/sdio_ops.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/sdio_ops.c + * + * Copyright 2006-2007 Pierre Ossman + */ + +#include + +#include +#include +#include +#include + +#include "core.h" +#include "sdio_ops.h" + +int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) +{ + struct mmc_command cmd = {}; + int i, err = 0; + + cmd.opcode = SD_IO_SEND_OP_COND; + cmd.arg = ocr; + cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR; + + for (i = 100; i; i--) { + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + if (err) + break; + + /* if we're just probing, do a single pass */ + if (ocr == 0) + break; + + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + /* + * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate + * an initialized card under SPI, but some cards + * (Marvell's) only behave when looking at this + * one. + */ + if (cmd.resp[1] & MMC_CARD_BUSY) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + + err = -ETIMEDOUT; + + mmc_delay(10); + } + + if (rocr) + *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0]; + + return err; +} + +static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn, + unsigned addr, u8 in, u8 *out) +{ + struct mmc_command cmd = {}; + int err; + + if (fn > 7) + return -EINVAL; + + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + + cmd.opcode = SD_IO_RW_DIRECT; + cmd.arg = write ? 0x80000000 : 0x00000000; + cmd.arg |= fn << 28; + cmd.arg |= (write && out) ? 0x08000000 : 0x00000000; + cmd.arg |= addr << 9; + cmd.arg |= in; + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + if (mmc_host_is_spi(host)) { + /* host driver already reported errors */ + } else { + if (cmd.resp[0] & R5_ERROR) + return -EIO; + if (cmd.resp[0] & R5_FUNCTION_NUMBER) + return -EINVAL; + if (cmd.resp[0] & R5_OUT_OF_RANGE) + return -ERANGE; + } + + if (out) { + if (mmc_host_is_spi(host)) + *out = (cmd.resp[0] >> 8) & 0xFF; + else + *out = cmd.resp[0] & 0xFF; + } + + return 0; +} + +int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, + unsigned addr, u8 in, u8 *out) +{ + return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out); +} + +int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, + unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg, *sg_ptr; + struct sg_table sgtable; + unsigned int nents, left_size, i; + unsigned int seg_size = card->host->max_seg_size; + int err; + + WARN_ON(blksz == 0); + + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_IO_RW_EXTENDED; + cmd.arg = write ? 0x80000000 : 0x00000000; + cmd.arg |= fn << 28; + cmd.arg |= incr_addr ? 0x04000000 : 0x00000000; + cmd.arg |= addr << 9; + if (blocks == 0) + cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */ + else + cmd.arg |= 0x08000000 | blocks; /* block mode */ + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC; + + data.blksz = blksz; + /* Code in host drivers/fwk assumes that "blocks" always is >=1 */ + data.blocks = blocks ? blocks : 1; + data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + + left_size = data.blksz * data.blocks; + nents = DIV_ROUND_UP(left_size, seg_size); + if (nents > 1) { + if (sg_alloc_table(&sgtable, nents, GFP_KERNEL)) + return -ENOMEM; + + data.sg = sgtable.sgl; + data.sg_len = nents; + + for_each_sg(data.sg, sg_ptr, data.sg_len, i) { + sg_set_buf(sg_ptr, buf + i * seg_size, + min(seg_size, left_size)); + left_size -= seg_size; + } + } else { + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, buf, left_size); + } + + mmc_set_data_timeout(&data, card); + + mmc_pre_req(card->host, &mrq); + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) + err = cmd.error; + else if (data.error) + err = data.error; + else if (mmc_host_is_spi(card->host)) + /* host driver already reported errors */ + err = 0; + else if (cmd.resp[0] & R5_ERROR) + err = -EIO; + else if (cmd.resp[0] & R5_FUNCTION_NUMBER) + err = -EINVAL; + else if (cmd.resp[0] & R5_OUT_OF_RANGE) + err = -ERANGE; + else + err = 0; + + mmc_post_req(card->host, &mrq, err); + + if (nents > 1) + sg_free_table(&sgtable); + + return err; +} + +int sdio_reset(struct mmc_host *host) +{ + int ret; + u8 abort; + + /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */ + + ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort); + if (ret) + abort = 0x08; + else + abort |= 0x08; + + return mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL); +} + -- cgit v1.2.3