From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mmc/host/sdhci-st.c | 527 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 527 insertions(+) create mode 100644 drivers/mmc/host/sdhci-st.c (limited to 'drivers/mmc/host/sdhci-st.c') diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c new file mode 100644 index 000000000..6415916fb --- /dev/null +++ b/drivers/mmc/host/sdhci-st.c @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for SDHCI on STMicroelectronics SoCs + * + * Copyright (C) 2014 STMicroelectronics Ltd + * Author: Giuseppe Cavallaro + * Contributors: Peter Griffin + * + * Based on sdhci-cns3xxx.c + */ + +#include +#include +#include +#include +#include +#include +#include "sdhci-pltfm.h" + +struct st_mmc_platform_data { + struct reset_control *rstc; + struct clk *icnclk; + void __iomem *top_ioaddr; +}; + +/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ + +#define ST_MMC_CCONFIG_REG_1 0x400 +#define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) +#define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) +#define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) +#define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) +#define ST_MMC_CCONFIG_1_DEFAULT \ + ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ + (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ + (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) + +#define ST_MMC_CCONFIG_REG_2 0x404 +#define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) +#define ST_MMC_CCONFIG_ADMA2 BIT(24) +#define ST_MMC_CCONFIG_8BIT BIT(20) +#define ST_MMC_CCONFIG_MAX_BLK_LEN 16 +#define MAX_BLK_LEN_1024 1 +#define MAX_BLK_LEN_2048 2 +#define BASE_CLK_FREQ_200 0xc8 +#define BASE_CLK_FREQ_100 0x64 +#define BASE_CLK_FREQ_50 0x32 +#define ST_MMC_CCONFIG_2_DEFAULT \ + (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ + ST_MMC_CCONFIG_8BIT | \ + (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) + +#define ST_MMC_CCONFIG_REG_3 0x408 +#define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) +#define ST_MMC_CCONFIG_64BIT BIT(24) +#define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) +#define ST_MMC_CCONFIG_1P8_VOLT BIT(16) +#define ST_MMC_CCONFIG_3P0_VOLT BIT(12) +#define ST_MMC_CCONFIG_3P3_VOLT BIT(8) +#define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) +#define ST_MMC_CCONFIG_SDMA BIT(0) +#define ST_MMC_CCONFIG_3_DEFAULT \ + (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ + ST_MMC_CCONFIG_3P3_VOLT | \ + ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ + ST_MMC_CCONFIG_SDMA) + +#define ST_MMC_CCONFIG_REG_4 0x40c +#define ST_MMC_CCONFIG_D_DRIVER BIT(20) +#define ST_MMC_CCONFIG_C_DRIVER BIT(16) +#define ST_MMC_CCONFIG_A_DRIVER BIT(12) +#define ST_MMC_CCONFIG_DDR50 BIT(8) +#define ST_MMC_CCONFIG_SDR104 BIT(4) +#define ST_MMC_CCONFIG_SDR50 BIT(0) +#define ST_MMC_CCONFIG_4_DEFAULT 0 + +#define ST_MMC_CCONFIG_REG_5 0x410 +#define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) +#define RETUNING_TIMER_CNT_MAX 0xf +#define ST_MMC_CCONFIG_5_DEFAULT 0 + +/* I/O configuration for Arasan IP */ +#define ST_MMC_GP_OUTPUT 0x450 +#define ST_MMC_GP_OUTPUT_CD BIT(12) + +#define ST_MMC_STATUS_R 0x460 + +#define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) + +/* TOP config registers to manage static and dynamic delay */ +#define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) +#define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) +/* MMC delay control register */ +#define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) +#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) +#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) +#define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) +#define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) +#define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) +#define ST_TOP_MMC_START_DLL_LOCK BIT(11) + +/* register to provide the phase-shift value for DLL */ +#define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) +#define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) +#define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) + +/* phase shift delay on the tx clk 2.188ns */ +#define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 + +#define ST_TOP_MMC_DLY_MAX 0xf + +#define ST_TOP_MMC_DYN_DLY_CONF \ + (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ + ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ + ST_TOP_MMC_START_DLL_LOCK) + +/* + * For clock speeds greater than 90MHz, we need to check that the + * DLL procedure has finished before switching to ultra-speed modes. + */ +#define CLK_TO_CHECK_DLL_LOCK 90000000 + +static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) +{ + if (!ioaddr) + return; + + writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); + writel_relaxed(ST_TOP_MMC_DLY_MAX, + ioaddr + ST_TOP_MMC_TX_CLK_DLY); +} + +/** + * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. + * @np: dt device node. + * @host: sdhci host + * Description: this function is to configure the Arasan host controller. + * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated + * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 + * or eMMC4.3. This has to be done before registering the sdhci host. + */ +static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct mmc_host *mhost = host->mmc; + u32 cconf2, cconf3, cconf4, cconf5; + + if (!of_device_is_compatible(np, "st,sdhci-stih407")) + return; + + cconf2 = ST_MMC_CCONFIG_2_DEFAULT; + cconf3 = ST_MMC_CCONFIG_3_DEFAULT; + cconf4 = ST_MMC_CCONFIG_4_DEFAULT; + cconf5 = ST_MMC_CCONFIG_5_DEFAULT; + + writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, + host->ioaddr + ST_MMC_CCONFIG_REG_1); + + /* Set clock frequency, default to 50MHz if max-frequency is not + * provided */ + + switch (mhost->f_max) { + case 200000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_200; + break; + case 100000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_100; + break; + default: + clk_set_rate(pltfm_host->clk, 50000000); + cconf2 |= BASE_CLK_FREQ_50; + } + + writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); + + if (!mmc_card_is_removable(mhost)) + cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; + else + /* CARD _D ET_CTRL */ + writel_relaxed(ST_MMC_GP_OUTPUT_CD, + host->ioaddr + ST_MMC_GP_OUTPUT); + + if (mhost->caps & MMC_CAP_UHS_SDR50) { + /* use 1.8V */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR50; + /* Use tuning */ + cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_SDR104) { + /* + * SDR104 implies the HC can support HS200 mode, so + * it's mandatory to use 1.8V + */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR104; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_DDR50) + cconf4 |= ST_MMC_CCONFIG_DDR50; + + writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); + writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); + writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); +} + +static inline void st_mmcss_set_dll(void __iomem *ioaddr) +{ + if (!ioaddr) + return; + + writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); + writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, + ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); +} + +static int st_mmcss_lock_dll(void __iomem *ioaddr) +{ + unsigned long curr, value; + unsigned long finish = jiffies + HZ; + + /* Checks if the DLL procedure is finished */ + do { + curr = jiffies; + value = readl(ioaddr + ST_MMC_STATUS_R); + if (value & 0x1) + return 0; + + cpu_relax(); + } while (!time_after_eq(curr, finish)); + + return -EBUSY; +} + +static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) +{ + int ret = 0; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); + + if (host->clock > CLK_TO_CHECK_DLL_LOCK) { + st_mmcss_set_dll(pdata->top_ioaddr); + ret = st_mmcss_lock_dll(host->ioaddr); + } + + return ret; +} + +static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); + u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + int ret = 0; + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + + case MMC_TIMING_UHS_SDR12: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR25: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR50: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + if (ret) + dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " + "(uhs %d)\n", uhs); + + dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static u32 sdhci_st_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + switch (reg) { + case SDHCI_CAPABILITIES: + ret = readl_relaxed(host->ioaddr + reg); + /* Support 3.3V and 1.8V */ + ret &= ~SDHCI_CAN_VDD_300; + break; + default: + ret = readl_relaxed(host->ioaddr + reg); + } + return ret; +} + +static const struct sdhci_ops sdhci_st_ops = { + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .read_l = sdhci_st_readl, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_st_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data sdhci_st_pdata = { + .ops = &sdhci_st_ops, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_HISPD_BIT, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC, +}; + + +static int sdhci_st_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_host *host; + struct st_mmc_platform_data *pdata; + struct sdhci_pltfm_host *pltfm_host; + struct clk *clk, *icnclk; + int ret = 0; + u16 host_version; + struct resource *res; + struct reset_control *rstc; + + clk = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Peripheral clk not found\n"); + return PTR_ERR(clk); + } + + /* ICN clock isn't compulsory, but use it if it's provided. */ + icnclk = devm_clk_get(&pdev->dev, "icn"); + if (IS_ERR(icnclk)) + icnclk = NULL; + + rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); + if (IS_ERR(rstc)) + return PTR_ERR(rstc); + reset_control_deassert(rstc); + + host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, sizeof(*pdata)); + if (IS_ERR(host)) { + dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); + ret = PTR_ERR(host); + goto err_pltfm_init; + } + + pltfm_host = sdhci_priv(host); + pdata = sdhci_pltfm_priv(pltfm_host); + pdata->rstc = rstc; + + ret = mmc_of_parse(host->mmc); + if (ret) { + dev_err(&pdev->dev, "Failed mmc_of_parse\n"); + goto err_of; + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "Failed to prepare clock\n"); + goto err_of; + } + + ret = clk_prepare_enable(icnclk); + if (ret) { + dev_err(&pdev->dev, "Failed to prepare icn clock\n"); + goto err_icnclk; + } + + /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "top-mmc-delay"); + pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdata->top_ioaddr)) + pdata->top_ioaddr = NULL; + + pltfm_host->clk = clk; + pdata->icnclk = icnclk; + + /* Configure the Arasan HC inside the flashSS */ + st_mmcss_cconfig(np, host); + + ret = sdhci_add_host(host); + if (ret) + goto err_out; + + host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); + + dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", + ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), + ((host_version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT)); + + return 0; + +err_out: + clk_disable_unprepare(icnclk); +err_icnclk: + clk_disable_unprepare(clk); +err_of: + sdhci_pltfm_free(pdev); +err_pltfm_init: + reset_control_assert(rstc); + + return ret; +} + +static int sdhci_st_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); + struct reset_control *rstc = pdata->rstc; + + sdhci_pltfm_unregister(pdev); + + clk_disable_unprepare(pdata->icnclk); + + reset_control_assert(rstc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_st_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); + int ret; + + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + + ret = sdhci_suspend_host(host); + if (ret) + goto out; + + reset_control_assert(pdata->rstc); + + clk_disable_unprepare(pdata->icnclk); + clk_disable_unprepare(pltfm_host->clk); +out: + return ret; +} + +static int sdhci_st_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); + struct device_node *np = dev->of_node; + int ret; + + ret = clk_prepare_enable(pltfm_host->clk); + if (ret) + return ret; + + ret = clk_prepare_enable(pdata->icnclk); + if (ret) { + clk_disable_unprepare(pltfm_host->clk); + return ret; + } + + reset_control_deassert(pdata->rstc); + + st_mmcss_cconfig(np, host); + + return sdhci_resume_host(host); +} +#endif + +static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); + +static const struct of_device_id st_sdhci_match[] = { + { .compatible = "st,sdhci" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, st_sdhci_match); + +static struct platform_driver sdhci_st_driver = { + .probe = sdhci_st_probe, + .remove = sdhci_st_remove, + .driver = { + .name = "sdhci-st", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &sdhci_st_pmops, + .of_match_table = st_sdhci_match, + }, +}; + +module_platform_driver(sdhci_st_driver); + +MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); +MODULE_AUTHOR("Giuseppe Cavallaro "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sdhci-st"); -- cgit v1.2.3