From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mtd/Kconfig | 225 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 drivers/mtd/Kconfig (limited to 'drivers/mtd/Kconfig') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig new file mode 100644 index 000000000..796a2eccb --- /dev/null +++ b/drivers/mtd/Kconfig @@ -0,0 +1,225 @@ +menuconfig MTD + tristate "Memory Technology Device (MTD) support" + imply NVMEM + help + Memory Technology Devices are flash, RAM and similar chips, often + used for solid state file systems on embedded devices. This option + will provide the generic support for MTD drivers to register + themselves with the kernel and for potential users of MTD devices + to enumerate the devices which are present and obtain a handle on + them. It will also allow you to select individual drivers for + particular hardware and users of MTD devices. If unsure, say N. + +if MTD + +config MTD_TESTS + tristate "MTD tests support (DANGEROUS)" + depends on m + help + This option includes various MTD tests into compilation. The tests + should normally be compiled as kernel modules. The modules perform + various checks and verifications when loaded. + + WARNING: some of the tests will ERASE entire MTD device which they + test. Do not use these tests unless you really know what you do. + +menu "Partition parsers" +source "drivers/mtd/parsers/Kconfig" +endmenu + +comment "User Modules And Translation Layers" + +# +# MTD block device support is select'ed if needed +# +config MTD_BLKDEVS + tristate + +config MTD_BLOCK + tristate "Caching block device access to MTD devices" + depends on BLOCK + select MTD_BLKDEVS + help + Although most flash chips have an erase size too large to be useful + as block devices, it is possible to use MTD devices which are based + on RAM chips in this manner. This block device is a user of MTD + devices performing that function. + + Note that mounting a JFFS2 filesystem doesn't require using mtdblock. + It's possible to mount a rootfs using the MTD device on the "root=" + bootargs as "root=mtd2" or "root=mtd:name_of_device". + + Later, it may be extended to perform read/erase/modify/write cycles + on flash chips to emulate a smaller block size. Needless to say, + this is very unsafe, but could be useful for file systems which are + almost never written to. + + You do not need this option for use with the DiskOnChip devices. For + those, enable NFTL support (CONFIG_NFTL) instead. + +config MTD_BLOCK_RO + tristate "Readonly block device access to MTD devices" + depends on MTD_BLOCK!=y && BLOCK + select MTD_BLKDEVS + help + This allows you to mount read-only file systems (such as cramfs) + from an MTD device, without the overhead (and danger) of the caching + driver. + + You do not need this option for use with the DiskOnChip devices. For + those, enable NFTL support (CONFIG_NFTL) instead. + +comment "Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK." + depends on MTD_BLOCK || MTD_BLOCK_RO + +config FTL + tristate "FTL (Flash Translation Layer) support" + depends on BLOCK + select MTD_BLKDEVS + help + This provides support for the original Flash Translation Layer which + is part of the PCMCIA specification. It uses a kind of pseudo- + file system on a flash device to emulate a block device with + 512-byte sectors, on top of which you put a 'normal' file system. + + You may find that the algorithms used in this code are patented + unless you live in the Free World where software patents aren't + legal - in the USA you are only permitted to use this on PCMCIA + hardware, although under the terms of the GPL you're obviously + permitted to copy, modify and distribute the code as you wish. Just + not use it. + +config NFTL + tristate "NFTL (NAND Flash Translation Layer) support" + depends on BLOCK + select MTD_BLKDEVS + help + This provides support for the NAND Flash Translation Layer which is + used on M-Systems' DiskOnChip devices. It uses a kind of pseudo- + file system on a flash device to emulate a block device with + 512-byte sectors, on top of which you put a 'normal' file system. + + You may find that the algorithms used in this code are patented + unless you live in the Free World where software patents aren't + legal - in the USA you are only permitted to use this on DiskOnChip + hardware, although under the terms of the GPL you're obviously + permitted to copy, modify and distribute the code as you wish. Just + not use it. + +config NFTL_RW + bool "Write support for NFTL" + depends on NFTL + help + Support for writing to the NAND Flash Translation Layer, as used + on the DiskOnChip. + +config INFTL + tristate "INFTL (Inverse NAND Flash Translation Layer) support" + depends on BLOCK + select MTD_BLKDEVS + help + This provides support for the Inverse NAND Flash Translation + Layer which is used on M-Systems' newer DiskOnChip devices. It + uses a kind of pseudo-file system on a flash device to emulate + a block device with 512-byte sectors, on top of which you put + a 'normal' file system. + + You may find that the algorithms used in this code are patented + unless you live in the Free World where software patents aren't + legal - in the USA you are only permitted to use this on DiskOnChip + hardware, although under the terms of the GPL you're obviously + permitted to copy, modify and distribute the code as you wish. Just + not use it. + +config RFD_FTL + tristate "Resident Flash Disk (Flash Translation Layer) support" + depends on BLOCK + select MTD_BLKDEVS + help + This provides support for the flash translation layer known + as the Resident Flash Disk (RFD), as used by the Embedded BIOS + of General Software. There is a blurb at: + + http://www.gensw.com/pages/prod/bios/rfd.htm + +config SSFDC + tristate "NAND SSFDC (SmartMedia) read only translation layer" + depends on BLOCK + select MTD_BLKDEVS + help + This enables read only access to SmartMedia formatted NAND + flash. You can mount it with FAT file system. + +config SM_FTL + tristate "SmartMedia/xD new translation layer" + depends on BLOCK + select MTD_BLKDEVS + select MTD_NAND_CORE + select MTD_NAND_ECC_SW_HAMMING + help + This enables EXPERIMENTAL R/W support for SmartMedia/xD + FTL (Flash translation layer). + Write support is only lightly tested, therefore this driver + isn't recommended to use with valuable data (anyway if you have + valuable data, do backups regardless of software/hardware you + use, because you never know what will eat your data...) + If you only need R/O access, you can use older R/O driver + (CONFIG_SSFDC) + +config MTD_OOPS + tristate "Log panic/oops to an MTD buffer" + help + This enables panic and oops messages to be logged to a circular + buffer in a flash partition where it can be read back at some + later point. + +config MTD_PSTORE + tristate "Log panic/oops to an MTD buffer based on pstore" + depends on PSTORE_BLK + help + This enables panic and oops messages to be logged to a circular + buffer in a flash partition where it can be read back as files after + mounting pstore filesystem. + + If unsure, say N. + +config MTD_SWAP + tristate "Swap on MTD device support" + depends on MTD && SWAP + select MTD_BLKDEVS + help + Provides volatile block device driver on top of mtd partition + suitable for swapping. The mapping of written blocks is not saved. + The driver provides wear leveling by storing erase counter into the + OOB. + +config MTD_PARTITIONED_MASTER + bool "Retain master device when partitioned" + default n + depends on MTD + help + For historical reasons, by default, either a master is present or + several partitions are present, but not both. The concern was that + data listed in multiple partitions was dangerous; however, SCSI does + this and it is frequently useful for applications. This config option + leaves the master in even if the device is partitioned. It also makes + the parent of the partition device be the master device, rather than + what lies behind the master. + +source "drivers/mtd/chips/Kconfig" + +source "drivers/mtd/maps/Kconfig" + +source "drivers/mtd/devices/Kconfig" + +source "drivers/mtd/nand/Kconfig" + +source "drivers/mtd/lpddr/Kconfig" + +source "drivers/mtd/spi-nor/Kconfig" + +source "drivers/mtd/ubi/Kconfig" + +source "drivers/mtd/hyperbus/Kconfig" + +endif # MTD -- cgit v1.2.3