From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mtd/nand/raw/ingenic/jz4780_bch.c | 271 ++++++++++++++++++++++++++++++ 1 file changed, 271 insertions(+) create mode 100644 drivers/mtd/nand/raw/ingenic/jz4780_bch.c (limited to 'drivers/mtd/nand/raw/ingenic/jz4780_bch.c') diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c new file mode 100644 index 000000000..12b5b0484 --- /dev/null +++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * JZ4780 BCH controller driver + * + * Copyright (c) 2015 Imagination Technologies + * Author: Alex Smith + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ingenic_ecc.h" + +#define BCH_BHCR 0x0 +#define BCH_BHCCR 0x8 +#define BCH_BHCNT 0xc +#define BCH_BHDR 0x10 +#define BCH_BHPAR0 0x14 +#define BCH_BHERR0 0x84 +#define BCH_BHINT 0x184 +#define BCH_BHINTES 0x188 +#define BCH_BHINTEC 0x18c +#define BCH_BHINTE 0x190 + +#define BCH_BHCR_BSEL_SHIFT 4 +#define BCH_BHCR_BSEL_MASK (0x7f << BCH_BHCR_BSEL_SHIFT) +#define BCH_BHCR_ENCE BIT(2) +#define BCH_BHCR_INIT BIT(1) +#define BCH_BHCR_BCHE BIT(0) + +#define BCH_BHCNT_PARITYSIZE_SHIFT 16 +#define BCH_BHCNT_PARITYSIZE_MASK (0x7f << BCH_BHCNT_PARITYSIZE_SHIFT) +#define BCH_BHCNT_BLOCKSIZE_SHIFT 0 +#define BCH_BHCNT_BLOCKSIZE_MASK (0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT) + +#define BCH_BHERR_MASK_SHIFT 16 +#define BCH_BHERR_MASK_MASK (0xffff << BCH_BHERR_MASK_SHIFT) +#define BCH_BHERR_INDEX_SHIFT 0 +#define BCH_BHERR_INDEX_MASK (0x7ff << BCH_BHERR_INDEX_SHIFT) + +#define BCH_BHINT_ERRC_SHIFT 24 +#define BCH_BHINT_ERRC_MASK (0x7f << BCH_BHINT_ERRC_SHIFT) +#define BCH_BHINT_TERRC_SHIFT 16 +#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT) +#define BCH_BHINT_DECF BIT(3) +#define BCH_BHINT_ENCF BIT(2) +#define BCH_BHINT_UNCOR BIT(1) +#define BCH_BHINT_ERR BIT(0) + +#define BCH_CLK_RATE (200 * 1000 * 1000) + +/* Timeout for BCH calculation/correction. */ +#define BCH_TIMEOUT_US 100000 + +static void jz4780_bch_reset(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, bool encode) +{ + u32 reg; + + /* Clear interrupt status. */ + writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT); + + /* Set up BCH count register. */ + reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT; + reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT; + writel(reg, bch->base + BCH_BHCNT); + + /* Initialise and enable BCH. */ + reg = BCH_BHCR_BCHE | BCH_BHCR_INIT; + reg |= params->strength << BCH_BHCR_BSEL_SHIFT; + if (encode) + reg |= BCH_BHCR_ENCE; + writel(reg, bch->base + BCH_BHCR); +} + +static void jz4780_bch_disable(struct ingenic_ecc *bch) +{ + writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT); + writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR); +} + +static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf, + size_t size) +{ + size_t size32 = size / sizeof(u32); + size_t size8 = size % sizeof(u32); + const u32 *src32; + const u8 *src8; + + src32 = (const u32 *)buf; + while (size32--) + writel(*src32++, bch->base + BCH_BHDR); + + src8 = (const u8 *)src32; + while (size8--) + writeb(*src8++, bch->base + BCH_BHDR); +} + +static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf, + size_t size) +{ + size_t size32 = size / sizeof(u32); + size_t size8 = size % sizeof(u32); + u32 *dest32; + u8 *dest8; + u32 val, offset = 0; + + dest32 = (u32 *)buf; + while (size32--) { + *dest32++ = readl(bch->base + BCH_BHPAR0 + offset); + offset += sizeof(u32); + } + + dest8 = (u8 *)dest32; + val = readl(bch->base + BCH_BHPAR0 + offset); + switch (size8) { + case 3: + dest8[2] = (val >> 16) & 0xff; + fallthrough; + case 2: + dest8[1] = (val >> 8) & 0xff; + fallthrough; + case 1: + dest8[0] = val & 0xff; + break; + } +} + +static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq, + u32 *status) +{ + u32 reg; + int ret; + + /* + * While we could use interrupts here and sleep until the operation + * completes, the controller works fairly quickly (usually a few + * microseconds) and so the overhead of sleeping until we get an + * interrupt quite noticeably decreases performance. + */ + ret = readl_poll_timeout(bch->base + BCH_BHINT, reg, + (reg & irq) == irq, 0, BCH_TIMEOUT_US); + if (ret) + return false; + + if (status) + *status = reg; + + writel(reg, bch->base + BCH_BHINT); + return true; +} + +static int jz4780_calculate(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code) +{ + int ret = 0; + + mutex_lock(&bch->lock); + + jz4780_bch_reset(bch, params, true); + jz4780_bch_write_data(bch, buf, params->size); + + if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) { + jz4780_bch_read_parity(bch, ecc_code, params->bytes); + } else { + dev_err(bch->dev, "timed out while calculating ECC\n"); + ret = -ETIMEDOUT; + } + + jz4780_bch_disable(bch); + mutex_unlock(&bch->lock); + return ret; +} + +static int jz4780_correct(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + u8 *buf, u8 *ecc_code) +{ + u32 reg, mask, index; + int i, ret, count; + + mutex_lock(&bch->lock); + + jz4780_bch_reset(bch, params, false); + jz4780_bch_write_data(bch, buf, params->size); + jz4780_bch_write_data(bch, ecc_code, params->bytes); + + if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, ®)) { + dev_err(bch->dev, "timed out while correcting data\n"); + ret = -ETIMEDOUT; + goto out; + } + + if (reg & BCH_BHINT_UNCOR) { + dev_warn(bch->dev, "uncorrectable ECC error\n"); + ret = -EBADMSG; + goto out; + } + + /* Correct any detected errors. */ + if (reg & BCH_BHINT_ERR) { + count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT; + ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT; + + for (i = 0; i < count; i++) { + reg = readl(bch->base + BCH_BHERR0 + (i * 4)); + mask = (reg & BCH_BHERR_MASK_MASK) >> + BCH_BHERR_MASK_SHIFT; + index = (reg & BCH_BHERR_INDEX_MASK) >> + BCH_BHERR_INDEX_SHIFT; + buf[(index * 2) + 0] ^= mask; + buf[(index * 2) + 1] ^= mask >> 8; + } + } else { + ret = 0; + } + +out: + jz4780_bch_disable(bch); + mutex_unlock(&bch->lock); + return ret; +} + +static int jz4780_bch_probe(struct platform_device *pdev) +{ + struct ingenic_ecc *bch; + int ret; + + ret = ingenic_ecc_probe(pdev); + if (ret) + return ret; + + bch = platform_get_drvdata(pdev); + clk_set_rate(bch->clk, BCH_CLK_RATE); + + return 0; +} + +static const struct ingenic_ecc_ops jz4780_bch_ops = { + .disable = jz4780_bch_disable, + .calculate = jz4780_calculate, + .correct = jz4780_correct, +}; + +static const struct of_device_id jz4780_bch_dt_match[] = { + { .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops }, + {}, +}; +MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match); + +static struct platform_driver jz4780_bch_driver = { + .probe = jz4780_bch_probe, + .driver = { + .name = "jz4780-bch", + .of_match_table = jz4780_bch_dt_match, + }, +}; +module_platform_driver(jz4780_bch_driver); + +MODULE_AUTHOR("Alex Smith "); +MODULE_AUTHOR("Harvey Hunt "); +MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3