From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mtd/parsers/scpart.c | 249 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 drivers/mtd/parsers/scpart.c (limited to 'drivers/mtd/parsers/scpart.c') diff --git a/drivers/mtd/parsers/scpart.c b/drivers/mtd/parsers/scpart.c new file mode 100644 index 000000000..6e5e11c37 --- /dev/null +++ b/drivers/mtd/parsers/scpart.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * drivers/mtd/scpart.c: Sercomm Partition Parser + * + * Copyright (C) 2018 NOGUCHI Hiroshi + * Copyright (C) 2022 Mikhail Zhilkin + */ + +#include +#include +#include +#include +#include + +#define MOD_NAME "scpart" + +#ifdef pr_fmt +#undef pr_fmt +#endif + +#define pr_fmt(fmt) MOD_NAME ": " fmt + +#define ID_ALREADY_FOUND 0xffffffffUL + +#define MAP_OFFS_IN_BLK 0x800 +#define MAP_MIRROR_NUM 2 + +static const char sc_part_magic[] = { + 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0', +}; +#define PART_MAGIC_LEN sizeof(sc_part_magic) + +/* assumes that all fields are set by CPU native endian */ +struct sc_part_desc { + uint32_t part_id; + uint32_t part_offs; + uint32_t part_bytes; +}; + +static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc) +{ + return ((pdesc->part_id != 0xffffffffUL) && + (pdesc->part_offs != 0xffffffffUL) && + (pdesc->part_bytes != 0xffffffffUL)); +} + +static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs, + struct sc_part_desc **ppdesc) +{ + int cnt = 0; + int res = 0; + int res2; + uint32_t offs; + size_t retlen; + struct sc_part_desc *pdesc = NULL; + struct sc_part_desc *tmpdesc; + uint8_t *buf; + + buf = kzalloc(master->erasesize, GFP_KERNEL); + if (!buf) { + res = -ENOMEM; + goto out; + } + + res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf); + if (res2 || retlen != master->erasesize) { + res = -EIO; + goto free; + } + + for (offs = MAP_OFFS_IN_BLK; + offs < master->erasesize - sizeof(*tmpdesc); + offs += sizeof(*tmpdesc)) { + tmpdesc = (struct sc_part_desc *)&buf[offs]; + if (!scpart_desc_is_valid(tmpdesc)) + break; + cnt++; + } + + if (cnt > 0) { + int bytes = cnt * sizeof(*pdesc); + + pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL); + if (!pdesc) { + res = -ENOMEM; + goto free; + } + memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes); + + *ppdesc = pdesc; + res = cnt; + } + +free: + kfree(buf); + +out: + return res; +} + +static int scpart_find_partmap(struct mtd_info *master, + struct sc_part_desc **ppdesc) +{ + int magic_found = 0; + int res = 0; + int res2; + loff_t offs = 0; + size_t retlen; + uint8_t rdbuf[PART_MAGIC_LEN]; + + while ((magic_found < MAP_MIRROR_NUM) && + (offs < master->size) && + !mtd_block_isbad(master, offs)) { + res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf); + if (res2 || retlen != PART_MAGIC_LEN) { + res = -EIO; + goto out; + } + if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) { + pr_debug("Signature found at 0x%llx\n", offs); + magic_found++; + res = scpart_scan_partmap(master, offs, ppdesc); + if (res > 0) + goto out; + } + offs += master->erasesize; + } + +out: + if (res > 0) + pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs); + else + pr_info("No valid 'SC PART MAP' was found\n"); + + return res; +} + +static int scpart_parse(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +{ + const char *partname; + int n; + int nr_scparts; + int nr_parts = 0; + int res = 0; + struct sc_part_desc *scpart_map = NULL; + struct mtd_partition *parts = NULL; + struct device_node *mtd_node; + struct device_node *ofpart_node; + struct device_node *pp; + + mtd_node = mtd_get_of_node(master); + if (!mtd_node) { + res = -ENOENT; + goto out; + } + + ofpart_node = of_get_child_by_name(mtd_node, "partitions"); + if (!ofpart_node) { + pr_info("%s: 'partitions' subnode not found on %pOF.\n", + master->name, mtd_node); + res = -ENOENT; + goto out; + } + + nr_scparts = scpart_find_partmap(master, &scpart_map); + if (nr_scparts <= 0) { + pr_info("No any partitions was found in 'SC PART MAP'.\n"); + res = -ENOENT; + goto free; + } + + parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts), + GFP_KERNEL); + if (!parts) { + res = -ENOMEM; + goto free; + } + + for_each_child_of_node(ofpart_node, pp) { + u32 scpart_id; + + if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id)) + continue; + + for (n = 0 ; n < nr_scparts ; n++) + if ((scpart_map[n].part_id != ID_ALREADY_FOUND) && + (scpart_id == scpart_map[n].part_id)) + break; + if (n >= nr_scparts) + /* not match */ + continue; + + /* add the partition found in OF into MTD partition array */ + parts[nr_parts].offset = scpart_map[n].part_offs; + parts[nr_parts].size = scpart_map[n].part_bytes; + parts[nr_parts].of_node = pp; + + if (!of_property_read_string(pp, "label", &partname)) + parts[nr_parts].name = partname; + if (of_property_read_bool(pp, "read-only")) + parts[nr_parts].mask_flags |= MTD_WRITEABLE; + if (of_property_read_bool(pp, "lock")) + parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK; + + /* mark as 'done' */ + scpart_map[n].part_id = ID_ALREADY_FOUND; + + nr_parts++; + } + + if (nr_parts > 0) { + *pparts = parts; + res = nr_parts; + } else + pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n"); + + of_node_put(pp); + +free: + of_node_put(ofpart_node); + kfree(scpart_map); + if (res <= 0) + kfree(parts); + +out: + return res; +} + +static const struct of_device_id scpart_parser_of_match_table[] = { + { .compatible = "sercomm,sc-partitions" }, + {}, +}; +MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table); + +static struct mtd_part_parser scpart_parser = { + .parse_fn = scpart_parse, + .name = "scpart", + .of_match_table = scpart_parser_of_match_table, +}; +module_mtd_part_parser(scpart_parser); + +/* mtd parsers will request the module by parser name */ +MODULE_ALIAS("scpart"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NOGUCHI Hiroshi "); +MODULE_AUTHOR("Mikhail Zhilkin "); +MODULE_DESCRIPTION("Sercomm partition parser"); -- cgit v1.2.3