From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/can/cc770/cc770_isa.c | 373 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 drivers/net/can/cc770/cc770_isa.c (limited to 'drivers/net/can/cc770/cc770_isa.c') diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c new file mode 100644 index 000000000..8f6dccd5a --- /dev/null +++ b/drivers/net/can/cc770/cc770_isa.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for CC770 and AN82527 CAN controllers on the legacy ISA bus + * + * Copyright (C) 2009, 2011 Wolfgang Grandegger + */ + +/* + * Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. + * The I/O port or memory address and the IRQ number must be specified via + * module parameters: + * + * insmod cc770_isa.ko port=0x310,0x380 irq=7,11 + * + * for ISA devices using I/O ports or: + * + * insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 + * + * for memory mapped ISA devices. + * + * Indirect access via address and data port is supported as well: + * + * insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 + * + * Furthermore, the following mode parameter can be defined: + * + * clk: External oscillator clock frequency (default=16000000 [16 MHz]) + * cir: CPU interface register (default=0x40 [DSC]) + * bcr: Bus configuration register (default=0x40 [CBY]) + * cor: Clockout register (default=0x00) + * + * Note: for clk, cir, bcr and cor, the first argument re-defines the + * default for all other devices, e.g.: + * + * insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 + * + * is equivalent to + * + * insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cc770.h" + +#define MAXDEV 8 + +MODULE_AUTHOR("Wolfgang Grandegger "); +MODULE_DESCRIPTION("Socket-CAN driver for CC770 on the ISA bus"); +MODULE_LICENSE("GPL v2"); + +#define CLK_DEFAULT 16000000 /* 16 MHz */ +#define COR_DEFAULT 0x00 +#define BCR_DEFAULT BUSCFG_CBY + +static unsigned long port[MAXDEV]; +static unsigned long mem[MAXDEV]; +static int irq[MAXDEV]; +static int clk[MAXDEV]; +static u8 cir[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; +static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; +static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; +static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; + +module_param_hw_array(port, ulong, ioport, NULL, 0444); +MODULE_PARM_DESC(port, "I/O port number"); + +module_param_hw_array(mem, ulong, iomem, NULL, 0444); +MODULE_PARM_DESC(mem, "I/O memory address"); + +module_param_hw_array(indirect, int, ioport, NULL, 0444); +MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); + +module_param_hw_array(irq, int, irq, NULL, 0444); +MODULE_PARM_DESC(irq, "IRQ number"); + +module_param_array(clk, int, NULL, 0444); +MODULE_PARM_DESC(clk, "External oscillator clock frequency " + "(default=16000000 [16 MHz])"); + +module_param_array(cir, byte, NULL, 0444); +MODULE_PARM_DESC(cir, "CPU interface register (default=0x40 [DSC])"); + +module_param_array(cor, byte, NULL, 0444); +MODULE_PARM_DESC(cor, "Clockout register (default=0x00)"); + +module_param_array(bcr, byte, NULL, 0444); +MODULE_PARM_DESC(bcr, "Bus configuration register (default=0x40 [CBY])"); + +#define CC770_IOSIZE 0x20 +#define CC770_IOSIZE_INDIRECT 0x02 + +/* Spinlock for cc770_isa_port_write_reg_indirect + * and cc770_isa_port_read_reg_indirect + */ +static DEFINE_SPINLOCK(cc770_isa_port_lock); + +static struct platform_device *cc770_isa_devs[MAXDEV]; + +static u8 cc770_isa_mem_read_reg(const struct cc770_priv *priv, int reg) +{ + return readb(priv->reg_base + reg); +} + +static void cc770_isa_mem_write_reg(const struct cc770_priv *priv, + int reg, u8 val) +{ + writeb(val, priv->reg_base + reg); +} + +static u8 cc770_isa_port_read_reg(const struct cc770_priv *priv, int reg) +{ + return inb((unsigned long)priv->reg_base + reg); +} + +static void cc770_isa_port_write_reg(const struct cc770_priv *priv, + int reg, u8 val) +{ + outb(val, (unsigned long)priv->reg_base + reg); +} + +static u8 cc770_isa_port_read_reg_indirect(const struct cc770_priv *priv, + int reg) +{ + unsigned long base = (unsigned long)priv->reg_base; + unsigned long flags; + u8 val; + + spin_lock_irqsave(&cc770_isa_port_lock, flags); + outb(reg, base); + val = inb(base + 1); + spin_unlock_irqrestore(&cc770_isa_port_lock, flags); + + return val; +} + +static void cc770_isa_port_write_reg_indirect(const struct cc770_priv *priv, + int reg, u8 val) +{ + unsigned long base = (unsigned long)priv->reg_base; + unsigned long flags; + + spin_lock_irqsave(&cc770_isa_port_lock, flags); + outb(reg, base); + outb(val, base + 1); + spin_unlock_irqrestore(&cc770_isa_port_lock, flags); +} + +static int cc770_isa_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct cc770_priv *priv; + void __iomem *base = NULL; + int iosize = CC770_IOSIZE; + int idx = pdev->id; + int err; + u32 clktmp; + + dev_dbg(&pdev->dev, "probing idx=%d: port=%#lx, mem=%#lx, irq=%d\n", + idx, port[idx], mem[idx], irq[idx]); + if (mem[idx]) { + if (!request_mem_region(mem[idx], iosize, KBUILD_MODNAME)) { + err = -EBUSY; + goto exit; + } + base = ioremap(mem[idx], iosize); + if (!base) { + err = -ENOMEM; + goto exit_release; + } + } else { + if (indirect[idx] > 0 || + (indirect[idx] == -1 && indirect[0] > 0)) + iosize = CC770_IOSIZE_INDIRECT; + if (!request_region(port[idx], iosize, KBUILD_MODNAME)) { + err = -EBUSY; + goto exit; + } + } + + dev = alloc_cc770dev(0); + if (!dev) { + err = -ENOMEM; + goto exit_unmap; + } + priv = netdev_priv(dev); + + dev->irq = irq[idx]; + priv->irq_flags = IRQF_SHARED; + if (mem[idx]) { + priv->reg_base = base; + dev->base_addr = mem[idx]; + priv->read_reg = cc770_isa_mem_read_reg; + priv->write_reg = cc770_isa_mem_write_reg; + } else { + priv->reg_base = (void __iomem *)port[idx]; + dev->base_addr = port[idx]; + + if (iosize == CC770_IOSIZE_INDIRECT) { + priv->read_reg = cc770_isa_port_read_reg_indirect; + priv->write_reg = cc770_isa_port_write_reg_indirect; + } else { + priv->read_reg = cc770_isa_port_read_reg; + priv->write_reg = cc770_isa_port_write_reg; + } + } + + if (clk[idx]) + clktmp = clk[idx]; + else if (clk[0]) + clktmp = clk[0]; + else + clktmp = CLK_DEFAULT; + priv->can.clock.freq = clktmp; + + if (cir[idx] != 0xff) { + priv->cpu_interface = cir[idx]; + } else if (cir[0] != 0xff) { + priv->cpu_interface = cir[0]; + } else { + /* The system clock may not exceed 10 MHz */ + if (clktmp > 10000000) { + priv->cpu_interface |= CPUIF_DSC; + clktmp /= 2; + } + /* The memory clock may not exceed 8 MHz */ + if (clktmp > 8000000) + priv->cpu_interface |= CPUIF_DMC; + } + + if (priv->cpu_interface & CPUIF_DSC) + priv->can.clock.freq /= 2; + + if (bcr[idx] != 0xff) + priv->bus_config = bcr[idx]; + else if (bcr[0] != 0xff) + priv->bus_config = bcr[0]; + else + priv->bus_config = BCR_DEFAULT; + + if (cor[idx] != 0xff) + priv->clkout = cor[idx]; + else if (cor[0] != 0xff) + priv->clkout = cor[0]; + else + priv->clkout = COR_DEFAULT; + + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + err = register_cc770dev(dev); + if (err) { + dev_err(&pdev->dev, + "couldn't register device (err=%d)\n", err); + goto exit_free; + } + + dev_info(&pdev->dev, "device registered (reg_base=0x%p, irq=%d)\n", + priv->reg_base, dev->irq); + return 0; + +exit_free: + free_cc770dev(dev); +exit_unmap: + if (mem[idx]) + iounmap(base); +exit_release: + if (mem[idx]) + release_mem_region(mem[idx], iosize); + else + release_region(port[idx], iosize); +exit: + return err; +} + +static int cc770_isa_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct cc770_priv *priv = netdev_priv(dev); + int idx = pdev->id; + + unregister_cc770dev(dev); + + if (mem[idx]) { + iounmap(priv->reg_base); + release_mem_region(mem[idx], CC770_IOSIZE); + } else { + if (priv->read_reg == cc770_isa_port_read_reg_indirect) + release_region(port[idx], CC770_IOSIZE_INDIRECT); + else + release_region(port[idx], CC770_IOSIZE); + } + free_cc770dev(dev); + + return 0; +} + +static struct platform_driver cc770_isa_driver = { + .probe = cc770_isa_probe, + .remove = cc770_isa_remove, + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +static int __init cc770_isa_init(void) +{ + int idx, err; + + for (idx = 0; idx < ARRAY_SIZE(cc770_isa_devs); idx++) { + if ((port[idx] || mem[idx]) && irq[idx]) { + cc770_isa_devs[idx] = + platform_device_alloc(KBUILD_MODNAME, idx); + if (!cc770_isa_devs[idx]) { + err = -ENOMEM; + goto exit_free_devices; + } + err = platform_device_add(cc770_isa_devs[idx]); + if (err) { + platform_device_put(cc770_isa_devs[idx]); + goto exit_free_devices; + } + pr_debug("platform device %d: port=%#lx, mem=%#lx, " + "irq=%d\n", + idx, port[idx], mem[idx], irq[idx]); + } else if (idx == 0 || port[idx] || mem[idx]) { + pr_err("insufficient parameters supplied\n"); + err = -EINVAL; + goto exit_free_devices; + } + } + + err = platform_driver_register(&cc770_isa_driver); + if (err) + goto exit_free_devices; + + pr_info("driver for max. %d devices registered\n", MAXDEV); + + return 0; + +exit_free_devices: + while (--idx >= 0) { + if (cc770_isa_devs[idx]) + platform_device_unregister(cc770_isa_devs[idx]); + } + + return err; +} +module_init(cc770_isa_init); + +static void __exit cc770_isa_exit(void) +{ + int idx; + + platform_driver_unregister(&cc770_isa_driver); + for (idx = 0; idx < ARRAY_SIZE(cc770_isa_devs); idx++) { + if (cc770_isa_devs[idx]) + platform_device_unregister(cc770_isa_devs[idx]); + } +} +module_exit(cc770_isa_exit); -- cgit v1.2.3