From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/dsa/b53/b53_mdio.c | 399 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) create mode 100644 drivers/net/dsa/b53/b53_mdio.c (limited to 'drivers/net/dsa/b53/b53_mdio.c') diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c new file mode 100644 index 000000000..6ddc03b58 --- /dev/null +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -0,0 +1,399 @@ +/* + * B53 register access through MII registers + * + * Copyright (C) 2011-2013 Jonas Gorski + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "b53_priv.h" + +/* MII registers */ +#define REG_MII_PAGE 0x10 /* MII Page register */ +#define REG_MII_ADDR 0x11 /* MII Address register */ +#define REG_MII_DATA0 0x18 /* MII Data register 0 */ +#define REG_MII_DATA1 0x19 /* MII Data register 1 */ +#define REG_MII_DATA2 0x1a /* MII Data register 2 */ +#define REG_MII_DATA3 0x1b /* MII Data register 3 */ + +#define REG_MII_PAGE_ENABLE BIT(0) +#define REG_MII_ADDR_WRITE BIT(0) +#define REG_MII_ADDR_READ BIT(1) + +static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op) +{ + int i; + u16 v; + int ret; + struct mii_bus *bus = dev->priv; + + if (dev->current_page != page) { + /* set page number */ + v = (page << 8) | REG_MII_PAGE_ENABLE; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_PAGE, v); + if (ret) + return ret; + dev->current_page = page; + } + + /* set register address */ + v = (reg << 8) | op; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v); + if (ret) + return ret; + + /* check if operation completed */ + for (i = 0; i < 5; ++i) { + v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_ADDR); + if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ))) + break; + usleep_range(10, 100); + } + + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0) & 0xff; + + return 0; +} + +static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + + return 0; +} + +static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + *val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA1) << 16; + + return 0; +} + +static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 2; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 3; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u32 temp = value; + + for (i = 0; i < 2; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 3; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 4; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg, + u16 *value) +{ + struct mii_bus *bus = dev->priv; + + *value = mdiobus_read_nested(bus, addr, reg); + + return 0; +} + +static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg, + u16 value) +{ + struct mii_bus *bus = dev->bus; + + return mdiobus_write_nested(bus, addr, reg, value); +} + +static const struct b53_io_ops b53_mdio_ops = { + .read8 = b53_mdio_read8, + .read16 = b53_mdio_read16, + .read32 = b53_mdio_read32, + .read48 = b53_mdio_read48, + .read64 = b53_mdio_read64, + .write8 = b53_mdio_write8, + .write16 = b53_mdio_write16, + .write32 = b53_mdio_write32, + .write48 = b53_mdio_write48, + .write64 = b53_mdio_write64, + .phy_read16 = b53_mdio_phy_read16, + .phy_write16 = b53_mdio_phy_write16, +}; + +#define B53_BRCM_OUI_1 0x0143bc00 +#define B53_BRCM_OUI_2 0x03625c00 +#define B53_BRCM_OUI_3 0x00406000 +#define B53_BRCM_OUI_4 0x01410c00 + +static int b53_mdio_probe(struct mdio_device *mdiodev) +{ + struct b53_device *dev; + u32 phy_id; + int ret; + + /* allow the generic PHY driver to take over the non-management MDIO + * addresses + */ + if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) { + dev_err(&mdiodev->dev, "leaving address %d to PHY\n", + mdiodev->addr); + return -ENODEV; + } + + /* read the first port's id */ + phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16; + phy_id |= mdiobus_read(mdiodev->bus, 0, 3); + + /* BCM5325, BCM539x (OUI_1) + * BCM53125, BCM53128 (OUI_2) + * BCM5365 (OUI_3) + */ + if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) { + dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id); + return -ENODEV; + } + + /* First probe will come from SWITCH_MDIO controller on the 7445D0 + * switch, which will conflict with the 7445 integrated switch + * pseudo-phy (we end-up programming both). In that case, we return + * -EPROBE_DEFER for the first time we get here, and wait until we come + * back with the slave MDIO bus which has the correct indirection + * layer setup + */ + if (of_machine_is_compatible("brcm,bcm7445d0") && + strcmp(mdiodev->bus->name, "sf2 slave mii")) + return -EPROBE_DEFER; + + dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); + if (!dev) + return -ENOMEM; + + /* we don't use page 0xff, so force a page set */ + dev->current_page = 0xff; + dev->bus = mdiodev->bus; + + dev_set_drvdata(&mdiodev->dev, dev); + + ret = b53_switch_register(dev); + if (ret) { + dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret); + return ret; + } + + return ret; +} + +static void b53_mdio_remove(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (!dev) + return; + + b53_switch_remove(dev); +} + +static void b53_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static const struct of_device_id b53_of_match[] = { + { .compatible = "brcm,bcm5325" }, + { .compatible = "brcm,bcm53115" }, + { .compatible = "brcm,bcm53125" }, + { .compatible = "brcm,bcm53128" }, + { .compatible = "brcm,bcm5365" }, + { .compatible = "brcm,bcm5389" }, + { .compatible = "brcm,bcm5395" }, + { .compatible = "brcm,bcm5397" }, + { .compatible = "brcm,bcm5398" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, b53_of_match); + +static struct mdio_driver b53_mdio_driver = { + .probe = b53_mdio_probe, + .remove = b53_mdio_remove, + .shutdown = b53_mdio_shutdown, + .mdiodrv.driver = { + .name = "bcm53xx", + .of_match_table = b53_of_match, + }, +}; +mdio_module_driver(b53_mdio_driver); + +MODULE_DESCRIPTION("B53 MDIO access driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v1.2.3