From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/dsa/b53/b53_serdes.h | 124 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 drivers/net/dsa/b53/b53_serdes.h (limited to 'drivers/net/dsa/b53/b53_serdes.h') diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h new file mode 100644 index 000000000..ef81f5da5 --- /dev/null +++ b/drivers/net/dsa/b53/b53_serdes.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* + * Northstar Plus switch SerDes/SGMII PHY definitions + * + * Copyright (C) 2018 Florian Fainelli + */ + +#include +#include + +/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */ +#define B53_SERDES_PAGE 0x16 +#define B53_SERDES_BLKADDR 0x3e +#define B53_SERDES_LANE 0x3c + +#define B53_SERDES_ID0 0x20 +#define SERDES_ID0_MODEL_MASK 0x3f +#define SERDES_ID0_REV_NUM_SHIFT 11 +#define SERDES_ID0_REV_NUM_MASK 0x7 +#define SERDES_ID0_REV_LETTER_SHIFT 14 + +#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2) +#define B53_SERDES_DIGITAL_CONTROL(x) (0x1e + (x) * 2) +#define B53_SERDES_DIGITAL_STATUS 0x28 + +/* SERDES_DIGITAL_CONTROL1 */ +#define FIBER_MODE_1000X BIT(0) +#define TBI_INTERFACE BIT(1) +#define SIGNAL_DETECT_EN BIT(2) +#define INVERT_SIGNAL_DETECT BIT(3) +#define AUTODET_EN BIT(4) +#define SGMII_MASTER_MODE BIT(5) +#define DISABLE_DLL_PWRDOWN BIT(6) +#define CRC_CHECKER_DIS BIT(7) +#define COMMA_DET_EN BIT(8) +#define ZERO_COMMA_DET_EN BIT(9) +#define REMOTE_LOOPBACK BIT(10) +#define SEL_RX_PKTS_FOR_CNTR BIT(11) +#define MASTER_MDIO_PHY_SEL BIT(13) +#define DISABLE_SIGNAL_DETECT_FLT BIT(14) + +/* SERDES_DIGITAL_CONTROL2 */ +#define EN_PARALLEL_DET BIT(0) +#define DIS_FALSE_LINK BIT(1) +#define FLT_FORCE_LINK BIT(2) +#define EN_AUTONEG_ERR_TIMER BIT(3) +#define DIS_REMOTE_FAULT_SENSING BIT(4) +#define FORCE_XMIT_DATA BIT(5) +#define AUTONEG_FAST_TIMERS BIT(6) +#define DIS_CARRIER_EXTEND BIT(7) +#define DIS_TRRR_GENERATION BIT(8) +#define BYPASS_PCS_RX BIT(9) +#define BYPASS_PCS_TX BIT(10) +#define TEST_CNTR_EN BIT(11) +#define TX_PACKET_SEQ_TEST BIT(12) +#define TX_IDLE_JAM_SEQ_TEST BIT(13) +#define CLR_BER_CNTR BIT(14) + +/* SERDES_DIGITAL_CONTROL3 */ +#define TX_FIFO_RST BIT(0) +#define FIFO_ELAST_TX_RX_SHIFT 1 +#define FIFO_ELAST_TX_RX_5K 0 +#define FIFO_ELAST_TX_RX_10K 1 +#define FIFO_ELAST_TX_RX_13_5K 2 +#define FIFO_ELAST_TX_RX_18_5K 3 +#define BLOCK_TXEN_MODE BIT(9) +#define JAM_FALSE_CARRIER_MODE BIT(10) +#define EXT_PHY_CRS_MODE BIT(11) +#define INVERT_EXT_PHY_CRS BIT(12) +#define DISABLE_TX_CRS BIT(13) + +/* SERDES_DIGITAL_STATUS */ +#define SGMII_MODE BIT(0) +#define LINK_STATUS BIT(1) +#define DUPLEX_STATUS BIT(2) +#define SPEED_STATUS_SHIFT 3 +#define SPEED_STATUS_10 0 +#define SPEED_STATUS_100 1 +#define SPEED_STATUS_1000 2 +#define SPEED_STATUS_2500 3 +#define SPEED_STATUS_MASK SPEED_STATUS_2500 +#define PAUSE_RESOLUTION_TX_SIDE BIT(5) +#define PAUSE_RESOLUTION_RX_SIDE BIT(6) +#define LINK_STATUS_CHANGE BIT(7) +#define EARLY_END_EXT_DET BIT(8) +#define CARRIER_EXT_ERR_DET BIT(9) +#define RX_ERR_DET BIT(10) +#define TX_ERR_DET BIT(11) +#define CRC_ERR_DET BIT(12) +#define FALSE_CARRIER_ERR_DET BIT(13) +#define RXFIFO_ERR_DET BIT(14) +#define TXFIFO_ERR_DET BIT(15) + +/* Block offsets */ +#define SERDES_DIGITAL_BLK 0x8300 +#define SERDES_ID0 0x8310 +#define SERDES_MII_BLK 0xffe0 +#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0 + +struct phylink_link_state; + +static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port) +{ + if (!dev->ops->serdes_map_lane) + return B53_INVALID_LANE; + + return dev->ops->serdes_map_lane(dev, port); +} + +void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, + phy_interface_t interface, bool link_up); +struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev, + int port, + phy_interface_t interface); +void b53_serdes_phylink_get_caps(struct b53_device *dev, int port, + struct phylink_config *config); +#if IS_ENABLED(CONFIG_B53_SERDES) +int b53_serdes_init(struct b53_device *dev, int port); +#else +static inline int b53_serdes_init(struct b53_device *dev, int port) +{ + return -ENODEV; +} +#endif -- cgit v1.2.3