From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/dsa/b53/b53_srab.c | 698 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 698 insertions(+) create mode 100644 drivers/net/dsa/b53/b53_srab.c (limited to 'drivers/net/dsa/b53/b53_srab.c') diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c new file mode 100644 index 000000000..bcb440344 --- /dev/null +++ b/drivers/net/dsa/b53/b53_srab.c @@ -0,0 +1,698 @@ +/* + * B53 register access through Switch Register Access Bridge Registers + * + * Copyright (C) 2013 Hauke Mehrtens + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "b53_priv.h" +#include "b53_serdes.h" + +/* command and status register of the SRAB */ +#define B53_SRAB_CMDSTAT 0x2c +#define B53_SRAB_CMDSTAT_RST BIT(2) +#define B53_SRAB_CMDSTAT_WRITE BIT(1) +#define B53_SRAB_CMDSTAT_GORDYN BIT(0) +#define B53_SRAB_CMDSTAT_PAGE 24 +#define B53_SRAB_CMDSTAT_REG 16 + +/* high order word of write data to switch registe */ +#define B53_SRAB_WD_H 0x30 + +/* low order word of write data to switch registe */ +#define B53_SRAB_WD_L 0x34 + +/* high order word of read data from switch register */ +#define B53_SRAB_RD_H 0x38 + +/* low order word of read data from switch register */ +#define B53_SRAB_RD_L 0x3c + +/* command and status register of the SRAB */ +#define B53_SRAB_CTRLS 0x40 +#define B53_SRAB_CTRLS_HOST_INTR BIT(1) +#define B53_SRAB_CTRLS_RCAREQ BIT(3) +#define B53_SRAB_CTRLS_RCAGNT BIT(4) +#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6) + +/* the register captures interrupt pulses from the switch */ +#define B53_SRAB_INTR 0x44 +#define B53_SRAB_INTR_P(x) BIT(x) +#define B53_SRAB_SWITCH_PHY BIT(8) +#define B53_SRAB_1588_SYNC BIT(9) +#define B53_SRAB_IMP1_SLEEP_TIMER BIT(10) +#define B53_SRAB_P7_SLEEP_TIMER BIT(11) +#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12) + +/* Port mux configuration registers */ +#define B53_MUX_CONFIG_P5 0x00 +#define MUX_CONFIG_SGMII 0 +#define MUX_CONFIG_MII_LITE 1 +#define MUX_CONFIG_RGMII 2 +#define MUX_CONFIG_GMII 3 +#define MUX_CONFIG_GPHY 4 +#define MUX_CONFIG_INTERNAL 5 +#define MUX_CONFIG_MASK 0x7 +#define B53_MUX_CONFIG_P4 0x04 + +struct b53_srab_port_priv { + int irq; + bool irq_enabled; + struct b53_device *dev; + unsigned int num; + phy_interface_t mode; +}; + +struct b53_srab_priv { + void __iomem *regs; + void __iomem *mux_config; + struct b53_srab_port_priv port_intrs[B53_N_PORTS]; +}; + +static int b53_srab_request_grant(struct b53_device *dev) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + u32 ctrls; + int i; + + ctrls = readl(regs + B53_SRAB_CTRLS); + ctrls |= B53_SRAB_CTRLS_RCAREQ; + writel(ctrls, regs + B53_SRAB_CTRLS); + + for (i = 0; i < 20; i++) { + ctrls = readl(regs + B53_SRAB_CTRLS); + if (ctrls & B53_SRAB_CTRLS_RCAGNT) + break; + usleep_range(10, 100); + } + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static void b53_srab_release_grant(struct b53_device *dev) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + u32 ctrls; + + ctrls = readl(regs + B53_SRAB_CTRLS); + ctrls &= ~B53_SRAB_CTRLS_RCAREQ; + writel(ctrls, regs + B53_SRAB_CTRLS); +} + +static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int i; + u32 cmdstat; + + /* set register address */ + cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) | + (reg << B53_SRAB_CMDSTAT_REG) | + B53_SRAB_CMDSTAT_GORDYN | + op; + writel(cmdstat, regs + B53_SRAB_CMDSTAT); + + /* check if operation completed */ + for (i = 0; i < 5; ++i) { + cmdstat = readl(regs + B53_SRAB_CMDSTAT); + if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN)) + break; + usleep_range(10, 100); + } + + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L) & 0xff; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L) & 0xffff; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + *val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + *val += (u64)readl(regs + B53_SRAB_RD_H) << 32; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel((u32)value, regs + B53_SRAB_WD_L); + writel((u16)(value >> 32), regs + B53_SRAB_WD_H); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel((u32)value, regs + B53_SRAB_WD_L); + writel((u32)(value >> 32), regs + B53_SRAB_WD_H); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static irqreturn_t b53_srab_port_thread(int irq, void *dev_id) +{ + struct b53_srab_port_priv *port = dev_id; + struct b53_device *dev = port->dev; + + if (port->mode == PHY_INTERFACE_MODE_SGMII) + b53_port_event(dev->ds, port->num); + + return IRQ_HANDLED; +} + +static irqreturn_t b53_srab_port_isr(int irq, void *dev_id) +{ + struct b53_srab_port_priv *port = dev_id; + struct b53_device *dev = port->dev; + struct b53_srab_priv *priv = dev->priv; + + /* Acknowledge the interrupt */ + writel(BIT(port->num), priv->regs + B53_SRAB_INTR); + + return IRQ_WAKE_THREAD; +} + +#if IS_ENABLED(CONFIG_B53_SERDES) +static u8 b53_srab_serdes_map_lane(struct b53_device *dev, int port) +{ + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *p = &priv->port_intrs[port]; + + if (p->mode != PHY_INTERFACE_MODE_SGMII) + return B53_INVALID_LANE; + + switch (port) { + case 5: + return 0; + case 4: + return 1; + default: + return B53_INVALID_LANE; + } +} +#endif + +static int b53_srab_irq_enable(struct b53_device *dev, int port) +{ + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *p = &priv->port_intrs[port]; + int ret = 0; + + /* Interrupt is optional and was not specified, do not make + * this fatal + */ + if (p->irq == -ENXIO) + return ret; + + ret = request_threaded_irq(p->irq, b53_srab_port_isr, + b53_srab_port_thread, 0, + dev_name(dev->dev), p); + if (!ret) + p->irq_enabled = true; + + return ret; +} + +static void b53_srab_irq_disable(struct b53_device *dev, int port) +{ + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *p = &priv->port_intrs[port]; + + if (p->irq_enabled) { + free_irq(p->irq, p); + p->irq_enabled = false; + } +} + +static void b53_srab_phylink_get_caps(struct b53_device *dev, int port, + struct phylink_config *config) +{ + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *p = &priv->port_intrs[port]; + + switch (p->mode) { + case PHY_INTERFACE_MODE_SGMII: +#if IS_ENABLED(CONFIG_B53_SERDES) + /* If p->mode indicates SGMII mode, that essentially means we + * are using a serdes. As the serdes for the capabilities. + */ + b53_serdes_phylink_get_caps(dev, port, config); +#endif + break; + + case PHY_INTERFACE_MODE_NA: + break; + + case PHY_INTERFACE_MODE_RGMII: + /* If we support RGMII, support all RGMII modes, since + * that dictates the PHY delay settings. + */ + phy_interface_set_rgmii(config->supported_interfaces); + break; + + default: + /* Some other mode (e.g. MII, GMII etc) */ + __set_bit(p->mode, config->supported_interfaces); + break; + } +} + +static const struct b53_io_ops b53_srab_ops = { + .read8 = b53_srab_read8, + .read16 = b53_srab_read16, + .read32 = b53_srab_read32, + .read48 = b53_srab_read48, + .read64 = b53_srab_read64, + .write8 = b53_srab_write8, + .write16 = b53_srab_write16, + .write32 = b53_srab_write32, + .write48 = b53_srab_write48, + .write64 = b53_srab_write64, + .irq_enable = b53_srab_irq_enable, + .irq_disable = b53_srab_irq_disable, + .phylink_get_caps = b53_srab_phylink_get_caps, +#if IS_ENABLED(CONFIG_B53_SERDES) + .phylink_mac_select_pcs = b53_serdes_phylink_mac_select_pcs, + .serdes_map_lane = b53_srab_serdes_map_lane, + .serdes_link_set = b53_serdes_link_set, +#endif +}; + +static const struct of_device_id b53_srab_of_match[] = { + { .compatible = "brcm,bcm53010-srab" }, + { .compatible = "brcm,bcm53011-srab" }, + { .compatible = "brcm,bcm53012-srab" }, + { .compatible = "brcm,bcm53018-srab" }, + { .compatible = "brcm,bcm53019-srab" }, + { .compatible = "brcm,bcm5301x-srab" }, + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID }, + { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm58622-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID }, + { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,omega-srab", .data = (void *)BCM583XX_DEVICE_ID }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, b53_srab_of_match); + +static void b53_srab_intr_set(struct b53_srab_priv *priv, bool set) +{ + u32 reg; + + reg = readl(priv->regs + B53_SRAB_CTRLS); + if (set) + reg |= B53_SRAB_CTRLS_HOST_INTR; + else + reg &= ~B53_SRAB_CTRLS_HOST_INTR; + writel(reg, priv->regs + B53_SRAB_CTRLS); +} + +static void b53_srab_prepare_irq(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *port; + unsigned int i; + char *name; + + /* Clear all pending interrupts */ + writel(0xffffffff, priv->regs + B53_SRAB_INTR); + + for (i = 0; i < B53_N_PORTS; i++) { + port = &priv->port_intrs[i]; + + /* There is no port 6 */ + if (i == 6) + continue; + + name = kasprintf(GFP_KERNEL, "link_state_p%d", i); + if (!name) + return; + + port->num = i; + port->dev = dev; + port->irq = platform_get_irq_byname_optional(pdev, name); + kfree(name); + } + + b53_srab_intr_set(priv, true); +} + +static void b53_srab_mux_init(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + struct b53_srab_priv *priv = dev->priv; + struct b53_srab_port_priv *p; + unsigned int port; + u32 reg, off = 0; + int ret; + + if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID) + return; + + priv->mux_config = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(priv->mux_config)) + return; + + /* Obtain the port mux configuration so we know which lanes + * actually map to SerDes lanes + */ + for (port = 5; port > 3; port--, off += 4) { + p = &priv->port_intrs[port]; + + reg = readl(priv->mux_config + B53_MUX_CONFIG_P5 + off); + switch (reg & MUX_CONFIG_MASK) { + case MUX_CONFIG_SGMII: + p->mode = PHY_INTERFACE_MODE_SGMII; + ret = b53_serdes_init(dev, port); + if (ret) + continue; + break; + case MUX_CONFIG_MII_LITE: + p->mode = PHY_INTERFACE_MODE_MII; + break; + case MUX_CONFIG_GMII: + p->mode = PHY_INTERFACE_MODE_GMII; + break; + case MUX_CONFIG_RGMII: + p->mode = PHY_INTERFACE_MODE_RGMII; + break; + case MUX_CONFIG_INTERNAL: + p->mode = PHY_INTERFACE_MODE_INTERNAL; + break; + default: + p->mode = PHY_INTERFACE_MODE_NA; + break; + } + + if (p->mode != PHY_INTERFACE_MODE_NA) + dev_info(&pdev->dev, "Port %d mode: %s\n", + port, phy_modes(p->mode)); + } +} + +static int b53_srab_probe(struct platform_device *pdev) +{ + struct b53_platform_data *pdata = pdev->dev.platform_data; + struct device_node *dn = pdev->dev.of_node; + const struct of_device_id *of_id = NULL; + struct b53_srab_priv *priv; + struct b53_device *dev; + + if (dn) + of_id = of_match_node(b53_srab_of_match, dn); + + if (of_id) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->chip_id = (u32)(unsigned long)of_id->data; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv); + if (!dev) + return -ENOMEM; + + if (pdata) + dev->pdata = pdata; + + platform_set_drvdata(pdev, dev); + + b53_srab_prepare_irq(pdev); + b53_srab_mux_init(pdev); + + return b53_switch_register(dev); +} + +static int b53_srab_remove(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (!dev) + return 0; + + b53_srab_intr_set(dev->priv, false); + b53_switch_remove(dev); + + return 0; +} + +static void b53_srab_shutdown(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + platform_set_drvdata(pdev, NULL); +} + +static struct platform_driver b53_srab_driver = { + .probe = b53_srab_probe, + .remove = b53_srab_remove, + .shutdown = b53_srab_shutdown, + .driver = { + .name = "b53-srab-switch", + .of_match_table = b53_srab_of_match, + }, +}; + +module_platform_driver(b53_srab_driver); +MODULE_AUTHOR("Hauke Mehrtens "); +MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v1.2.3