From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/dsa/microchip/lan937x_main.c | 404 +++++++++++++++++++++++++++++++ 1 file changed, 404 insertions(+) create mode 100644 drivers/net/dsa/microchip/lan937x_main.c (limited to 'drivers/net/dsa/microchip/lan937x_main.c') diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c new file mode 100644 index 000000000..399a3905e --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip LAN937X switch driver main logic + * Copyright (C) 2019-2022 Microchip Technology Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "lan937x_reg.h" +#include "ksz_common.h" +#include "ksz9477.h" +#include "lan937x.h" + +static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); +} + +static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, + u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +{ + u16 data16; + int ret; + + /* Enable Phy access through SPI */ + ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); + if (ret < 0) + return ret; + + ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); + if (ret < 0) + return ret; + + /* Allow SPI access */ + data16 |= VPHY_SPI_INDIRECT_ENABLE; + + return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); +} + +static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) +{ + u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE; + u16 temp; + + /* get register address based on the logical port */ + temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); + + return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); +} + +static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg, + u16 val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port */ + if (!dev->info->internal_phy[addr]) + return -EOPNOTSUPP; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write the data to be written to the VPHY reg */ + ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val); + if (ret < 0) + return ret; + + /* Write the Write En and Busy bit */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, + (VPHY_IND_WRITE | VPHY_IND_BUSY)); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to write phy register\n"); + return ret; + } + + return 0; +} + +static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg, + u16 *val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port, return 0xffff for non-existent phy */ + if (!dev->info->internal_phy[addr]) + return 0xffff; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write Read and Busy bit to start the transaction */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to read phy register\n"); + return ret; + } + + /* Read the VPHY register which has the PHY data */ + return ksz_read16(dev, REG_VPHY_IND_DATA__2, val); +} + +int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) +{ + return lan937x_internal_phy_read(dev, addr, reg, data); +} + +int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) +{ + return lan937x_internal_phy_write(dev, addr, reg, val); +} + +int lan937x_reset_switch(struct ksz_device *dev) +{ + u32 data32; + int ret; + + /* reset switch */ + ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + if (ret < 0) + return ret; + + /* Enable Auto Aging */ + ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true); + if (ret < 0) + return ret; + + /* disable interrupts */ + ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + if (ret < 0) + return ret; + + ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT); + if (ret < 0) + return ret; + + ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF); + if (ret < 0) + return ret; + + return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); +} + +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + const u32 *masks = dev->info->masks; + const u16 *regs = dev->info->regs; + struct dsa_switch *ds = dev->ds; + u8 member; + + /* enable tag tail for host port */ + if (cpu_port) + lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_TAIL_TAG_ENABLE, true); + + /* Enable the Port Queue split */ + ksz9477_port_queue_split(dev, port); + + /* set back pressure for half duplex */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, + true); + + /* enable 802.1p priority */ + lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + if (!dev->info->internal_phy[port]) + lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0], + masks[P_MII_TX_FLOW_CTRL] | + masks[P_MII_RX_FLOW_CTRL], + true); + + if (cpu_port) + member = dsa_user_ports(ds); + else + member = BIT(dsa_upstream_port(ds, port)); + + dev->dev_ops->cfg_port_member(dev, port, member); +} + +void lan937x_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct dsa_port *dp; + + dsa_switch_for_each_cpu_port(dp, ds) { + if (dev->info->cpu_ports & (1 << dp->index)) { + dev->cpu_port = dp->index; + + /* enable cpu port */ + lan937x_port_setup(dev, dp->index, true); + } + } + + dsa_switch_for_each_user_port(dp, ds) { + ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED); + } +} + +int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) +{ + struct dsa_switch *ds = dev->ds; + int ret; + + new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; + + if (dsa_is_cpu_port(ds, port)) + new_mtu += LAN937X_TAG_LEN; + + if (new_mtu >= FR_MIN_SIZE) + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, true); + else + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, false); + if (ret < 0) { + dev_err(ds->dev, "failed to enable jumbo\n"); + return ret; + } + + /* Write the frame size in PORT_MAX_FR_SIZE register */ + ret = ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu); + if (ret) { + dev_err(ds->dev, "failed to update mtu for port %d\n", port); + return ret; + } + + return 0; +} + +int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) +{ + u32 secs = msecs / 1000; + u32 value; + int ret; + + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); + + ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); + if (ret < 0) + return ret; + + value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs); + + return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value); +} + +static void lan937x_set_tune_adj(struct ksz_device *dev, int port, + u16 reg, u8 val) +{ + u16 data16; + + ksz_pread16(dev, port, reg, &data16); + + /* Update tune Adjust */ + data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); + ksz_pwrite16(dev, port, reg, data16); + + /* write DLL reset to take effect */ + data16 |= PORT_DLL_RESET; + ksz_pwrite16(dev, port, reg, data16); +} + +static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port) +{ + u8 val; + + /* Apply different codes based on the ports as per characterization + * results + */ + val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS : + RGMII_2_TX_DELAY_2NS; + + lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val); +} + +static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port) +{ + u8 val; + + val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS : + RGMII_2_RX_DELAY_2NS; + + lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val); +} + +void lan937x_phylink_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config) +{ + config->mac_capabilities = MAC_100FD; + + if (dev->info->supports_rgmii[port]) { + /* MII/RMII/RGMII ports */ + config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_100HD | MAC_10 | MAC_1000FD; + } +} + +void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port) +{ + struct ksz_port *p = &dev->ports[port]; + + if (p->rgmii_tx_val) { + lan937x_set_rgmii_tx_delay(dev, port); + dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n", + port); + } + + if (p->rgmii_rx_val) { + lan937x_set_rgmii_rx_delay(dev, port); + dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n", + port); + } +} + +int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) +{ + return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); +} + +int lan937x_switch_init(struct ksz_device *dev) +{ + dev->port_mask = (1 << dev->info->port_cnt) - 1; + + return 0; +} + +int lan937x_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret; + + /* enable Indirect Access from SPI to the VPHY registers */ + ret = lan937x_enable_spi_indirect_access(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to enable spi indirect access"); + return ret; + } + + /* The VLAN aware is a global setting. Mixed vlan + * filterings are not supported. + */ + ds->vlan_filtering_is_global = true; + + /* Enable aggressive back off for half duplex & UNH mode */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_0, + (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF), + true); + + /* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop + * packets when 16 or more collisions occur + */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); + + /* enable global MIB counter freeze function */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + + /* disable CLK125 & CLK25, 1: disable, 0: enable */ + lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, + (SW_CLK125_ENB | SW_CLK25_ENB), true); + + return 0; +} + +void lan937x_teardown(struct dsa_switch *ds) +{ + +} + +void lan937x_switch_exit(struct ksz_device *dev) +{ + lan937x_reset_switch(dev); +} + +MODULE_AUTHOR("Arun Ramadoss "); +MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3