From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/dsa/realtek/realtek-mdio.c | 287 +++++++++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) create mode 100644 drivers/net/dsa/realtek/realtek-mdio.c (limited to 'drivers/net/dsa/realtek/realtek-mdio.c') diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c new file mode 100644 index 000000000..3e54fac5f --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Realtek MDIO interface driver + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + * Copyright (C) 2009-2010 Gabor Juhos + */ + +#include +#include +#include + +#include "realtek.h" + +/* Read/write via mdiobus */ +#define REALTEK_MDIO_CTRL0_REG 31 +#define REALTEK_MDIO_START_REG 29 +#define REALTEK_MDIO_CTRL1_REG 21 +#define REALTEK_MDIO_ADDRESS_REG 23 +#define REALTEK_MDIO_DATA_WRITE_REG 24 +#define REALTEK_MDIO_DATA_READ_REG 25 + +#define REALTEK_MDIO_START_OP 0xFFFF +#define REALTEK_MDIO_ADDR_OP 0x000E +#define REALTEK_MDIO_READ_OP 0x0001 +#define REALTEK_MDIO_WRITE_OP 0x0003 + +static int realtek_mdio_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP); + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int realtek_mdio_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP); + if (ret) + goto out_unlock; + + ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG); + if (ret >= 0) { + *val = ret; + ret = 0; + } + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static void realtek_mdio_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} + +static void realtek_mdio_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} + +static const struct regmap_config realtek_mdio_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_mdio_read, + .reg_write = realtek_mdio_write, + .cache_type = REGCACHE_NONE, + .lock = realtek_mdio_lock, + .unlock = realtek_mdio_unlock, +}; + +static const struct regmap_config realtek_mdio_nolock_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_mdio_read, + .reg_write = realtek_mdio_write, + .cache_type = REGCACHE_NONE, + .disable_locking = true, +}; + +static int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv; + struct device *dev = &mdiodev->dev; + const struct realtek_variant *var; + struct regmap_config rc; + struct device_node *np; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return -EINVAL; + + priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->map_lock); + + rc = realtek_mdio_regmap_config; + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + rc = realtek_mdio_nolock_regmap_config; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + priv->mdio_addr = mdiodev->addr; + priv->bus = mdiodev->bus; + priv->dev = &mdiodev->dev; + priv->chip_data = (void *)priv + sizeof(*priv); + + priv->clk_delay = var->clk_delay; + priv->cmd_read = var->cmd_read; + priv->cmd_write = var->cmd_write; + priv->ops = var->ops; + + priv->write_reg_noack = realtek_mdio_write; + + np = dev->of_node; + + dev_set_drvdata(dev, priv); + + /* TODO: if power is software controlled, set up any regulators here */ + priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(priv->reset); + } + + if (priv->reset) { + gpiod_set_value(priv->reset, 1); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + gpiod_set_value(priv->reset, 0); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + ret = priv->ops->detect(priv); + if (ret) { + dev_err(dev, "unable to detect switch\n"); + return ret; + } + + priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = dev; + priv->ds->num_ports = priv->num_ports; + priv->ds->priv = priv; + priv->ds->ops = var->ds_ops_mdio; + + ret = dsa_register_switch(priv->ds); + if (ret) { + dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + return ret; + } + + return 0; +} + +static void realtek_mdio_remove(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_unregister_switch(priv->ds); + + /* leave the device reset asserted */ + if (priv->reset) + gpiod_set_value(priv->reset, 1); +} + +static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static const struct of_device_id realtek_mdio_of_match[] = { +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) + { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, +#endif +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) + { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, +#endif + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); + +static struct mdio_driver realtek_mdio_driver = { + .mdiodrv.driver = { + .name = "realtek-mdio", + .of_match_table = of_match_ptr(realtek_mdio_of_match), + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +mdio_module_driver(realtek_mdio_driver); + +MODULE_AUTHOR("Luiz Angelo Daros de Luca "); +MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3