From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/broadcom/b44.h | 413 ++++++++++++++++++++++++++++++++++++ 1 file changed, 413 insertions(+) create mode 100644 drivers/net/ethernet/broadcom/b44.h (limited to 'drivers/net/ethernet/broadcom/b44.h') diff --git a/drivers/net/ethernet/broadcom/b44.h b/drivers/net/ethernet/broadcom/b44.h new file mode 100644 index 000000000..b3e36ca0f --- /dev/null +++ b/drivers/net/ethernet/broadcom/b44.h @@ -0,0 +1,413 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _B44_H +#define _B44_H + +#include + +/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */ +#define B44_DEVCTRL 0x0000UL /* Device Control */ +#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */ +#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */ +#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */ +#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */ +#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */ +#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */ +#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */ +#define DEVCTRL_PADDR_SHIFT 18 +#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */ +#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */ +#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */ +#define WKUP_LEN_D0 0x00000080 +#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */ +#define WKUP_LEN_P1_SHIFT 8 +#define WKUP_LEN_D1 0x00008000 +#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */ +#define WKUP_LEN_P2_SHIFT 16 +#define WKUP_LEN_D2 0x00000000 +#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */ +#define WKUP_LEN_P3_SHIFT 24 +#define WKUP_LEN_D3 0x80000000 +#define WKUP_LEN_DISABLE 0x80808080 +#define WKUP_LEN_ENABLE_TWO 0x80800000 +#define WKUP_LEN_ENABLE_THREE 0x80000000 +#define B44_ISTAT 0x0020UL /* Interrupt Status */ +#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */ +#define ISTAT_PME 0x00000040 /* Power Management Event */ +#define ISTAT_TO 0x00000080 /* General Purpose Timeout */ +#define ISTAT_DSCE 0x00000400 /* Descriptor Error */ +#define ISTAT_DATAE 0x00000800 /* Data Error */ +#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */ +#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */ +#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */ +#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */ +#define ISTAT_RX 0x00010000 /* RX Interrupt */ +#define ISTAT_TX 0x01000000 /* TX Interrupt */ +#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */ +#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */ +#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */ +#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU) +#define B44_IMASK 0x0024UL /* Interrupt Mask */ +#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX) +#define B44_GPTIMER 0x0028UL /* General Purpose Timer */ +#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */ +#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */ +#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */ +#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */ +#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */ +#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */ +#define B44_MAC_CTRL 0x00A8UL /* MAC Control */ +#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */ +#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */ +#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */ +#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */ +#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5 +#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */ +#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */ +#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */ +#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */ +#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */ +#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */ +#define RCV_LAZY_FC_SHIFT 24 +#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */ +#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */ +#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */ +#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */ +#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */ +#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */ +#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */ +#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */ +#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */ +#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ +#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */ +#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */ +#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */ +#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */ +#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */ +#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */ +#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */ +#define DMATX_STAT_ENONE 0x00000000 /* Error None */ +#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ +#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */ +#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */ +#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ +#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */ +#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */ +#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */ +#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */ +#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */ +#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */ +#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */ +#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */ +#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ +#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */ +#define DMARX_STAT_SDISABLED 0x00000000 /* State Disabled */ +#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */ +#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */ +#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */ +#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */ +#define DMARX_STAT_ENONE 0x00000000 /* Error None */ +#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ +#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */ +#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */ +#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ +#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */ +#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */ +#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */ +#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */ +#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */ +#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */ +#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */ +#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */ +#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */ +#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */ +#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */ +#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */ +#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */ +#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */ +#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */ +#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */ +#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */ +#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */ +#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */ +#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ +#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ +#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ +#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ +#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ +#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ +#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ +#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */ +#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */ +#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */ +#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */ +#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */ +#define MDIO_DATA_TA_SHIFT 16 +#define MDIO_TA_VALID 2 +#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */ +#define MDIO_DATA_RA_SHIFT 18 +#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */ +#define MDIO_DATA_PMD_SHIFT 23 +#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */ +#define MDIO_DATA_OP_SHIFT 28 +#define MDIO_OP_WRITE 1 +#define MDIO_OP_READ 2 +#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */ +#define MDIO_DATA_SB_SHIFT 30 +#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */ +#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */ +#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */ +#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */ +#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */ +#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */ +#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */ +#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */ +#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */ +#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */ +#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */ +#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */ +#define CAM_CTRL_READ 0x00000004 /* Read */ +#define CAM_CTRL_WRITE 0x00000008 /* Read */ +#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */ +#define CAM_CTRL_INDEX_SHIFT 16 +#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */ +#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */ +#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */ +#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */ +#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */ +#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */ +#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */ +#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */ +#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */ +#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */ +#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */ +#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */ +#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */ +#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */ +#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */ +#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */ +#define B44_TX_O 0x0508UL /* MIB TX Octets */ +#define B44_TX_P 0x050CUL /* MIB TX Packets */ +#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */ +#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */ +#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */ +#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */ +#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */ +#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */ +#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */ +#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */ +#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */ +#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */ +#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */ +#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */ +#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */ +#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */ +#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */ +#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */ +#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */ +#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */ +#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */ +#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */ +#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */ +#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */ +#define B44_RX_O 0x0588UL /* MIB RX Octets */ +#define B44_RX_P 0x058CUL /* MIB RX Packets */ +#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */ +#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */ +#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */ +#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */ +#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */ +#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */ +#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */ +#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */ +#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */ +#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */ +#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */ +#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */ +#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */ +#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */ +#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */ +#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */ +#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */ +#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ +#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ + +/* 4400 PHY registers */ +#define B44_MII_AUXCTRL 24 /* Auxiliary Control */ +#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ +#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */ +#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */ +#define B44_MII_ALEDCTRL 26 /* Activity LED */ +#define MII_ALEDCTRL_ALLMSK 0x7fff +#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */ +#define MII_TLEDCTRL_ENABLE 0x0040 + +struct dma_desc { + __le32 ctrl; + __le32 addr; +}; + +/* There are only 12 bits in the DMA engine for descriptor offsetting + * so the table must be aligned on a boundary of this. + */ +#define DMA_TABLE_BYTES 4096 + +#define DESC_CTRL_LEN 0x00001fff +#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */ +#define DESC_CTRL_EOT 0x10000000 /* End of Table */ +#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */ +#define DESC_CTRL_EOF 0x40000000 /* End of Frame */ +#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */ + +#define RX_COPY_THRESHOLD 256 + +struct rx_header { + __le16 len; + __le16 flags; + __le16 pad[12]; +}; +#define RX_HEADER_LEN 28 + +#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */ +#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */ +#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */ +#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */ +#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */ +#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */ +#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */ +#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */ +#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */ +#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO) + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +#define B44_MCAST_TABLE_SIZE 32 +/* no local phy regs, e.g: Broadcom switches pseudo-PHY */ +#define B44_PHY_ADDR_NO_LOCAL_PHY BRCM_PSEUDO_PHY_ADDR +/* no phy present at all */ +#define B44_PHY_ADDR_NO_PHY 31 +#define B44_MDC_RATIO 5000000 + +#define B44_STAT_REG_DECLARE \ + _B44(tx_good_octets) \ + _B44(tx_good_pkts) \ + _B44(tx_octets) \ + _B44(tx_pkts) \ + _B44(tx_broadcast_pkts) \ + _B44(tx_multicast_pkts) \ + _B44(tx_len_64) \ + _B44(tx_len_65_to_127) \ + _B44(tx_len_128_to_255) \ + _B44(tx_len_256_to_511) \ + _B44(tx_len_512_to_1023) \ + _B44(tx_len_1024_to_max) \ + _B44(tx_jabber_pkts) \ + _B44(tx_oversize_pkts) \ + _B44(tx_fragment_pkts) \ + _B44(tx_underruns) \ + _B44(tx_total_cols) \ + _B44(tx_single_cols) \ + _B44(tx_multiple_cols) \ + _B44(tx_excessive_cols) \ + _B44(tx_late_cols) \ + _B44(tx_defered) \ + _B44(tx_carrier_lost) \ + _B44(tx_pause_pkts) \ + _B44(rx_good_octets) \ + _B44(rx_good_pkts) \ + _B44(rx_octets) \ + _B44(rx_pkts) \ + _B44(rx_broadcast_pkts) \ + _B44(rx_multicast_pkts) \ + _B44(rx_len_64) \ + _B44(rx_len_65_to_127) \ + _B44(rx_len_128_to_255) \ + _B44(rx_len_256_to_511) \ + _B44(rx_len_512_to_1023) \ + _B44(rx_len_1024_to_max) \ + _B44(rx_jabber_pkts) \ + _B44(rx_oversize_pkts) \ + _B44(rx_fragment_pkts) \ + _B44(rx_missed_pkts) \ + _B44(rx_crc_align_errs) \ + _B44(rx_undersize) \ + _B44(rx_crc_errs) \ + _B44(rx_align_errs) \ + _B44(rx_symbol_errs) \ + _B44(rx_pause_pkts) \ + _B44(rx_nonpause_pkts) + +/* SW copy of device statistics, kept up to date by periodic timer + * which probes HW values. Check b44_stats_update if you mess with + * the layout + */ +struct b44_hw_stats { +#define _B44(x) u64 x; +B44_STAT_REG_DECLARE +#undef _B44 + struct u64_stats_sync syncp; +}; + +#define B44_BOARDFLAG_ROBO 0x0010 /* Board has robo switch */ +#define B44_BOARDFLAG_ADM 0x0080 /* Board has ADMtek switch */ + +struct ssb_device; + +struct b44 { + spinlock_t lock; + + u32 imask, istat; + + struct dma_desc *rx_ring, *tx_ring; + + u32 tx_prod, tx_cons; + u32 rx_prod, rx_cons; + + struct ring_info *rx_buffers; + struct ring_info *tx_buffers; + + struct napi_struct napi; + + u32 dma_offset; + u32 flags; +#define B44_FLAG_B0_ANDLATER 0x00000001 +#define B44_FLAG_BUGGY_TXPTR 0x00000002 +#define B44_FLAG_REORDER_BUG 0x00000004 +#define B44_FLAG_PAUSE_AUTO 0x00008000 +#define B44_FLAG_FULL_DUPLEX 0x00010000 +#define B44_FLAG_100_BASE_T 0x00020000 +#define B44_FLAG_TX_PAUSE 0x00040000 +#define B44_FLAG_RX_PAUSE 0x00080000 +#define B44_FLAG_FORCE_LINK 0x00100000 +#define B44_FLAG_ADV_10HALF 0x01000000 +#define B44_FLAG_ADV_10FULL 0x02000000 +#define B44_FLAG_ADV_100HALF 0x04000000 +#define B44_FLAG_ADV_100FULL 0x08000000 +#define B44_FLAG_EXTERNAL_PHY 0x10000000 +#define B44_FLAG_RX_RING_HACK 0x20000000 +#define B44_FLAG_TX_RING_HACK 0x40000000 +#define B44_FLAG_WOL_ENABLE 0x80000000 + + u32 msg_enable; + + struct timer_list timer; + + struct b44_hw_stats hw_stats; + + struct ssb_device *sdev; + struct net_device *dev; + + dma_addr_t rx_ring_dma, tx_ring_dma; + + u32 rx_pending; + u32 tx_pending; + u8 phy_addr; + u8 force_copybreak; + struct mii_bus *mii_bus; + int old_link; + struct mii_if_info mii_if; +}; + +#endif /* _B44_H */ -- cgit v1.2.3