From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/cavium/liquidio/octeon_nic.c | 198 ++++++++++++++++++++++ 1 file changed, 198 insertions(+) create mode 100644 drivers/net/ethernet/cavium/liquidio/octeon_nic.c (limited to 'drivers/net/ethernet/cavium/liquidio/octeon_nic.c') diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_nic.c b/drivers/net/ethernet/cavium/liquidio/octeon_nic.c new file mode 100644 index 000000000..1a706f81b --- /dev/null +++ b/drivers/net/ethernet/cavium/liquidio/octeon_nic.c @@ -0,0 +1,198 @@ +/********************************************************************** + * Author: Cavium, Inc. + * + * Contact: support@cavium.com + * Please include "LiquidIO" in the subject. + * + * Copyright (c) 2003-2016 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + **********************************************************************/ +#include +#include +#include "liquidio_common.h" +#include "octeon_droq.h" +#include "octeon_iq.h" +#include "response_manager.h" +#include "octeon_device.h" +#include "octeon_nic.h" +#include "octeon_main.h" + +void * +octeon_alloc_soft_command_resp(struct octeon_device *oct, + union octeon_instr_64B *cmd, + u32 rdatasize) +{ + struct octeon_soft_command *sc; + struct octeon_instr_ih3 *ih3; + struct octeon_instr_ih2 *ih2; + struct octeon_instr_irh *irh; + struct octeon_instr_rdp *rdp; + + sc = (struct octeon_soft_command *) + octeon_alloc_soft_command(oct, 0, rdatasize, 0); + + if (!sc) + return NULL; + + /* Copy existing command structure into the soft command */ + memcpy(&sc->cmd, cmd, sizeof(union octeon_instr_64B)); + + /* Add in the response related fields. Opcode and Param are already + * there. + */ + if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct)) { + ih3 = (struct octeon_instr_ih3 *)&sc->cmd.cmd3.ih3; + rdp = (struct octeon_instr_rdp *)&sc->cmd.cmd3.rdp; + irh = (struct octeon_instr_irh *)&sc->cmd.cmd3.irh; + /*pkiih3 + irh + ossp[0] + ossp[1] + rdp + rptr = 40 bytes */ + ih3->fsz = LIO_SOFTCMDRESP_IH3; + } else { + ih2 = (struct octeon_instr_ih2 *)&sc->cmd.cmd2.ih2; + rdp = (struct octeon_instr_rdp *)&sc->cmd.cmd2.rdp; + irh = (struct octeon_instr_irh *)&sc->cmd.cmd2.irh; + /* irh + ossp[0] + ossp[1] + rdp + rptr = 40 bytes */ + ih2->fsz = LIO_SOFTCMDRESP_IH2; + } + + irh->rflag = 1; /* a response is required */ + + rdp->pcie_port = oct->pcie_port; + rdp->rlen = rdatasize; + + *sc->status_word = COMPLETION_WORD_INIT; + + if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct)) + sc->cmd.cmd3.rptr = sc->dmarptr; + else + sc->cmd.cmd2.rptr = sc->dmarptr; + + sc->expiry_time = jiffies + msecs_to_jiffies(LIO_SC_MAX_TMO_MS); + + return sc; +} + +int octnet_send_nic_data_pkt(struct octeon_device *oct, + struct octnic_data_pkt *ndata, + int xmit_more) +{ + int ring_doorbell = !xmit_more; + + return octeon_send_command(oct, ndata->q_no, ring_doorbell, &ndata->cmd, + ndata->buf, ndata->datasize, + ndata->reqtype); +} + +static inline struct octeon_soft_command +*octnic_alloc_ctrl_pkt_sc(struct octeon_device *oct, + struct octnic_ctrl_pkt *nctrl) +{ + struct octeon_soft_command *sc = NULL; + u8 *data; + u32 rdatasize; + u32 uddsize = 0, datasize = 0; + + uddsize = (u32)(nctrl->ncmd.s.more * 8); + + datasize = OCTNET_CMD_SIZE + uddsize; + rdatasize = 16; + + sc = (struct octeon_soft_command *) + octeon_alloc_soft_command(oct, datasize, rdatasize, 0); + + if (!sc) + return NULL; + + data = (u8 *)sc->virtdptr; + + memcpy(data, &nctrl->ncmd, OCTNET_CMD_SIZE); + + octeon_swap_8B_data((u64 *)data, (OCTNET_CMD_SIZE >> 3)); + + if (uddsize) { + /* Endian-Swap for UDD should have been done by caller. */ + memcpy(data + OCTNET_CMD_SIZE, nctrl->udd, uddsize); + } + + sc->iq_no = (u32)nctrl->iq_no; + + octeon_prepare_soft_command(oct, sc, OPCODE_NIC, OPCODE_NIC_CMD, + 0, 0, 0); + + init_completion(&sc->complete); + sc->sc_status = OCTEON_REQUEST_PENDING; + + return sc; +} + +int +octnet_send_nic_ctrl_pkt(struct octeon_device *oct, + struct octnic_ctrl_pkt *nctrl) +{ + int retval; + struct octeon_soft_command *sc = NULL; + + spin_lock_bh(&oct->cmd_resp_wqlock); + /* Allow only rx ctrl command to stop traffic on the chip + * during offline operations + */ + if ((oct->cmd_resp_state == OCT_DRV_OFFLINE) && + (nctrl->ncmd.s.cmd != OCTNET_CMD_RX_CTL)) { + spin_unlock_bh(&oct->cmd_resp_wqlock); + dev_err(&oct->pci_dev->dev, + "%s cmd:%d not processed since driver offline\n", + __func__, nctrl->ncmd.s.cmd); + return -1; + } + + sc = octnic_alloc_ctrl_pkt_sc(oct, nctrl); + if (!sc) { + dev_err(&oct->pci_dev->dev, "%s soft command alloc failed\n", + __func__); + spin_unlock_bh(&oct->cmd_resp_wqlock); + return -1; + } + + retval = octeon_send_soft_command(oct, sc); + if (retval == IQ_SEND_FAILED) { + octeon_free_soft_command(oct, sc); + dev_err(&oct->pci_dev->dev, "%s pf_num:%d soft command:%d send failed status: %x\n", + __func__, oct->pf_num, nctrl->ncmd.s.cmd, retval); + spin_unlock_bh(&oct->cmd_resp_wqlock); + return -1; + } + + spin_unlock_bh(&oct->cmd_resp_wqlock); + + if (nctrl->ncmd.s.cmdgroup == 0) { + switch (nctrl->ncmd.s.cmd) { + /* caller holds lock, can not sleep */ + case OCTNET_CMD_CHANGE_DEVFLAGS: + case OCTNET_CMD_SET_MULTI_LIST: + case OCTNET_CMD_SET_UC_LIST: + WRITE_ONCE(sc->caller_is_done, true); + return retval; + } + } + + retval = wait_for_sc_completion_timeout(oct, sc, 0); + if (retval) + return (retval); + + nctrl->sc_status = sc->sc_status; + retval = nctrl->sc_status; + if (nctrl->cb_fn) + nctrl->cb_fn(nctrl); + + WRITE_ONCE(sc->caller_is_done, true); + + return retval; +} -- cgit v1.2.3