From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/ethernet/chelsio/cxgb3/firmware_exports.h | 177 +++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h (limited to 'drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h') diff --git a/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h b/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h new file mode 100644 index 000000000..0d9b0e6dc --- /dev/null +++ b/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FIRMWARE_EXPORTS_H_ +#define _FIRMWARE_EXPORTS_H_ + +/* WR OPCODES supported by the firmware. + */ +#define FW_WROPCODE_FORWARD 0x01 +#define FW_WROPCODE_BYPASS 0x05 + +#define FW_WROPCODE_TUNNEL_TX_PKT 0x03 + +#define FW_WROPOCDE_ULPTX_DATA_SGL 0x00 +#define FW_WROPCODE_ULPTX_MEM_READ 0x02 +#define FW_WROPCODE_ULPTX_PKT 0x04 +#define FW_WROPCODE_ULPTX_INVALIDATE 0x06 + +#define FW_WROPCODE_TUNNEL_RX_PKT 0x07 + +#define FW_WROPCODE_OFLD_GETTCB_RPL 0x08 +#define FW_WROPCODE_OFLD_CLOSE_CON 0x09 +#define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A +#define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F +#define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B +#define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C +#define FW_WROPCODE_OFLD_TX_DATA 0x0D +#define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E + +#define FW_WROPCODE_RI_RDMA_INIT 0x10 +#define FW_WROPCODE_RI_RDMA_WRITE 0x11 +#define FW_WROPCODE_RI_RDMA_READ_REQ 0x12 +#define FW_WROPCODE_RI_RDMA_READ_RESP 0x13 +#define FW_WROPCODE_RI_SEND 0x14 +#define FW_WROPCODE_RI_TERMINATE 0x15 +#define FW_WROPCODE_RI_RDMA_READ 0x16 +#define FW_WROPCODE_RI_RECEIVE 0x17 +#define FW_WROPCODE_RI_BIND_MW 0x18 +#define FW_WROPCODE_RI_FASTREGISTER_MR 0x19 +#define FW_WROPCODE_RI_LOCAL_INV 0x1A +#define FW_WROPCODE_RI_MODIFY_QP 0x1B +#define FW_WROPCODE_RI_BYPASS 0x1C + +#define FW_WROPOCDE_RSVD 0x1E + +#define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F + +#define FW_WROPCODE_MNGT 0x1D +#define FW_MNGTOPCODE_PKTSCHED_SET 0x00 + +/* Maximum size of a WR sent from the host, limited by the SGE. + * + * Note: WR coming from ULP or TP are only limited by CIM. + */ +#define FW_WR_SIZE 128 + +/* Maximum number of outstanding WRs sent from the host. Value must be + * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by + * offload modules to limit the number of WRs per connection. + */ +#define FW_T3_WR_NUM 16 +#define FW_N3_WR_NUM 7 + +#ifndef N3 +# define FW_WR_NUM FW_T3_WR_NUM +#else +# define FW_WR_NUM FW_N3_WR_NUM +#endif + +/* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These + * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must + * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START. + * + * Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent + * to RESP Queue[i]. + */ +#define FW_TUNNEL_NUM 8 +#define FW_TUNNEL_SGEEC_START 8 +#define FW_TUNNEL_TID_START 65544 + +/* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues + * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID' + * (or 'uP Token') FW_CTRL_TID_START. + * + * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i]. + */ +#define FW_CTRL_NUM 8 +#define FW_CTRL_SGEEC_START 65528 +#define FW_CTRL_TID_START 65536 + +/* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These + * queues must start at SGE Egress Context FW_OFLD_SGEEC_START. + * + * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for + * OFFLOAD Queues, as the host is responsible for providing the correct TID in + * every WR. + * + * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i]. + */ +#define FW_OFLD_NUM 8 +#define FW_OFLD_SGEEC_START 0 + +/* + * + */ +#define FW_RI_NUM 1 +#define FW_RI_SGEEC_START 65527 +#define FW_RI_TID_START 65552 + +/* + * The RX_PKT_TID + */ +#define FW_RX_PKT_NUM 1 +#define FW_RX_PKT_TID_START 65553 + +/* FW_WRC_NUM corresponds to the number of Work Request Context that supported + * by the firmware. + */ +#define FW_WRC_NUM \ + (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM) + +/* + * FW type and version. + */ +#define S_FW_VERSION_TYPE 28 +#define M_FW_VERSION_TYPE 0xF +#define V_FW_VERSION_TYPE(x) ((x) << S_FW_VERSION_TYPE) +#define G_FW_VERSION_TYPE(x) \ + (((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE) + +#define S_FW_VERSION_MAJOR 16 +#define M_FW_VERSION_MAJOR 0xFFF +#define V_FW_VERSION_MAJOR(x) ((x) << S_FW_VERSION_MAJOR) +#define G_FW_VERSION_MAJOR(x) \ + (((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR) + +#define S_FW_VERSION_MINOR 8 +#define M_FW_VERSION_MINOR 0xFF +#define V_FW_VERSION_MINOR(x) ((x) << S_FW_VERSION_MINOR) +#define G_FW_VERSION_MINOR(x) \ + (((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR) + +#define S_FW_VERSION_MICRO 0 +#define M_FW_VERSION_MICRO 0xFF +#define V_FW_VERSION_MICRO(x) ((x) << S_FW_VERSION_MICRO) +#define G_FW_VERSION_MICRO(x) \ + (((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO) + +#endif /* _FIRMWARE_EXPORTS_H_ */ -- cgit v1.2.3