From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 303 +++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 drivers/net/ethernet/chelsio/cxgb4/t4_hw.h (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.h') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h new file mode 100644 index 000000000..63bc956d2 --- /dev/null +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h @@ -0,0 +1,303 @@ +/* + * This file is part of the Chelsio T4 Ethernet driver for Linux. + * + * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __T4_HW_H +#define __T4_HW_H + +#include + +enum { + NCHAN = 4, /* # of HW channels */ + MAX_MTU = 9600, /* max MAC MTU, excluding header + FCS */ + EEPROMSIZE = 17408,/* Serial EEPROM physical size */ + EEPROMVSIZE = 32768,/* Serial EEPROM virtual address space size */ + EEPROMPFSIZE = 1024, /* EEPROM writable area size for PFn, n>0 */ + RSS_NENTRIES = 2048, /* # of entries in RSS mapping table */ + T6_RSS_NENTRIES = 4096, /* # of entries in RSS mapping table */ + TCB_SIZE = 128, /* TCB size */ + NMTUS = 16, /* size of MTU table */ + NCCTRL_WIN = 32, /* # of congestion control windows */ + NTX_SCHED = 8, /* # of HW Tx scheduling queues */ + PM_NSTATS = 5, /* # of PM stats */ + T6_PM_NSTATS = 7, /* # of PM stats in T6 */ + MBOX_LEN = 64, /* mailbox size in bytes */ + TRACE_LEN = 112, /* length of trace data and mask */ + FILTER_OPT_LEN = 36, /* filter tuple width for optional components */ +}; + +enum { + CIM_NUM_IBQ = 6, /* # of CIM IBQs */ + CIM_NUM_OBQ = 6, /* # of CIM OBQs */ + CIM_NUM_OBQ_T5 = 8, /* # of CIM OBQs for T5 adapter */ + CIMLA_SIZE = 2048, /* # of 32-bit words in CIM LA */ + CIM_PIFLA_SIZE = 64, /* # of 192-bit words in CIM PIF LA */ + CIM_MALA_SIZE = 64, /* # of 160-bit words in CIM MA LA */ + CIM_IBQ_SIZE = 128, /* # of 128-bit words in a CIM IBQ */ + CIM_OBQ_SIZE = 128, /* # of 128-bit words in a CIM OBQ */ + TPLA_SIZE = 128, /* # of 64-bit words in TP LA */ + ULPRX_LA_SIZE = 512, /* # of 256-bit words in ULP_RX LA */ +}; + +/* SGE context types */ +enum ctxt_type { + CTXT_EGRESS, + CTXT_INGRESS, + CTXT_FLM, + CTXT_CNM, +}; + +enum { + SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ +}; + +enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ + +enum { MBOX_OWNER_NONE, MBOX_OWNER_FW, MBOX_OWNER_DRV }; /* mailbox owners */ + +enum { + SGE_MAX_WR_LEN = 512, /* max WR size in bytes */ + SGE_CTXT_SIZE = 24, /* size of SGE context */ + SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */ + SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */ + SGE_NDBQTIMERS = 8, /* # of Doorbell Queue Timer values */ + SGE_MAX_IQ_SIZE = 65520, + + SGE_TIMER_RSTRT_CNTR = 6, /* restart RX packet threshold counter */ + SGE_TIMER_UPD_CIDX = 7, /* update cidx only */ + + SGE_EQ_IDXSIZE = 64, /* egress queue pidx/cidx unit size */ + + SGE_INTRDST_PCI = 0, /* interrupt destination is PCI-E */ + SGE_INTRDST_IQ = 1, /* destination is an ingress queue */ + + SGE_UPDATEDEL_NONE = 0, /* ingress queue pidx update delivery */ + SGE_UPDATEDEL_INTR = 1, /* interrupt */ + SGE_UPDATEDEL_STPG = 2, /* status page */ + SGE_UPDATEDEL_BOTH = 3, /* interrupt and status page */ + + SGE_HOSTFCMODE_NONE = 0, /* egress queue cidx updates */ + SGE_HOSTFCMODE_IQ = 1, /* sent to ingress queue */ + SGE_HOSTFCMODE_STPG = 2, /* sent to status page */ + SGE_HOSTFCMODE_BOTH = 3, /* ingress queue and status page */ + + SGE_FETCHBURSTMIN_16B = 0,/* egress queue descriptor fetch minimum */ + SGE_FETCHBURSTMIN_32B = 1, + SGE_FETCHBURSTMIN_64B = 2, + SGE_FETCHBURSTMIN_128B = 3, + + SGE_FETCHBURSTMAX_64B = 0,/* egress queue descriptor fetch maximum */ + SGE_FETCHBURSTMAX_128B = 1, + SGE_FETCHBURSTMAX_256B = 2, + SGE_FETCHBURSTMAX_512B = 3, + + SGE_CIDXFLUSHTHRESH_1 = 0,/* egress queue cidx flush threshold */ + SGE_CIDXFLUSHTHRESH_2 = 1, + SGE_CIDXFLUSHTHRESH_4 = 2, + SGE_CIDXFLUSHTHRESH_8 = 3, + SGE_CIDXFLUSHTHRESH_16 = 4, + SGE_CIDXFLUSHTHRESH_32 = 5, + SGE_CIDXFLUSHTHRESH_64 = 6, + SGE_CIDXFLUSHTHRESH_128 = 7, + + SGE_INGPADBOUNDARY_SHIFT = 5,/* ingress queue pad boundary */ +}; + +/* PCI-e memory window access */ +enum pcie_memwin { + MEMWIN_NIC = 0, + MEMWIN_RSVD1 = 1, + MEMWIN_RSVD2 = 2, + MEMWIN_RDMA = 3, + MEMWIN_RSVD4 = 4, + MEMWIN_FOISCSI = 5, + MEMWIN_CSIOSTOR = 6, + MEMWIN_RSVD7 = 7, +}; + +struct sge_qstat { /* data written to SGE queue status entries */ + __be32 qid; + __be16 cidx; + __be16 pidx; +}; + +/* + * Structure for last 128 bits of response descriptors + */ +struct rsp_ctrl { + __be32 hdrbuflen_pidx; + __be32 pldbuflen_qid; + union { + u8 type_gen; + __be64 last_flit; + }; +}; + +#define RSPD_NEWBUF_S 31 +#define RSPD_NEWBUF_V(x) ((x) << RSPD_NEWBUF_S) +#define RSPD_NEWBUF_F RSPD_NEWBUF_V(1U) + +#define RSPD_LEN_S 0 +#define RSPD_LEN_M 0x7fffffff +#define RSPD_LEN_G(x) (((x) >> RSPD_LEN_S) & RSPD_LEN_M) + +#define RSPD_QID_S RSPD_LEN_S +#define RSPD_QID_M RSPD_LEN_M +#define RSPD_QID_G(x) RSPD_LEN_G(x) + +#define RSPD_GEN_S 7 + +#define RSPD_TYPE_S 4 +#define RSPD_TYPE_M 0x3 +#define RSPD_TYPE_G(x) (((x) >> RSPD_TYPE_S) & RSPD_TYPE_M) + +/* Rx queue interrupt deferral fields: counter enable and timer index */ +#define QINTR_CNT_EN_S 0 +#define QINTR_CNT_EN_V(x) ((x) << QINTR_CNT_EN_S) +#define QINTR_CNT_EN_F QINTR_CNT_EN_V(1U) + +#define QINTR_TIMER_IDX_S 1 +#define QINTR_TIMER_IDX_M 0x7 +#define QINTR_TIMER_IDX_V(x) ((x) << QINTR_TIMER_IDX_S) +#define QINTR_TIMER_IDX_G(x) (((x) >> QINTR_TIMER_IDX_S) & QINTR_TIMER_IDX_M) + +/* + * Flash layout. + */ +#define FLASH_START(start) ((start) * SF_SEC_SIZE) +#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) + +enum { + /* + * Various Expansion-ROM boot images, etc. + */ + FLASH_EXP_ROM_START_SEC = 0, + FLASH_EXP_ROM_NSECS = 6, + FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC), + FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS), + + /* + * iSCSI Boot Firmware Table (iBFT) and other driver-related + * parameters ... + */ + FLASH_IBFT_START_SEC = 6, + FLASH_IBFT_NSECS = 1, + FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC), + FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS), + + /* + * Boot configuration data. + */ + FLASH_BOOTCFG_START_SEC = 7, + FLASH_BOOTCFG_NSECS = 1, + FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC), + FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS), + + /* + * Location of firmware image in FLASH. + */ + FLASH_FW_START_SEC = 8, + FLASH_FW_NSECS = 16, + FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), + FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), + + /* Location of bootstrap firmware image in FLASH. + */ + FLASH_FWBOOTSTRAP_START_SEC = 27, + FLASH_FWBOOTSTRAP_NSECS = 1, + FLASH_FWBOOTSTRAP_START = FLASH_START(FLASH_FWBOOTSTRAP_START_SEC), + FLASH_FWBOOTSTRAP_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FWBOOTSTRAP_NSECS), + + /* + * iSCSI persistent/crash information. + */ + FLASH_ISCSI_CRASH_START_SEC = 29, + FLASH_ISCSI_CRASH_NSECS = 1, + FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC), + FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS), + + /* + * FCoE persistent/crash information. + */ + FLASH_FCOE_CRASH_START_SEC = 30, + FLASH_FCOE_CRASH_NSECS = 1, + FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC), + FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS), + + /* + * Location of Firmware Configuration File in FLASH. Since the FPGA + * "FLASH" is smaller we need to store the Configuration File in a + * different location -- which will overlap the end of the firmware + * image if firmware ever gets that large ... + */ + FLASH_CFG_START_SEC = 31, + FLASH_CFG_NSECS = 1, + FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC), + FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS), + + /* We don't support FLASH devices which can't support the full + * standard set of sections which we need for normal + * operations. + */ + FLASH_MIN_SIZE = FLASH_CFG_START + FLASH_CFG_MAX_SIZE, + + FLASH_FPGA_CFG_START_SEC = 15, + FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC), + + /* + * Sectors 32-63 are reserved for FLASH failover. + */ +}; + +#undef FLASH_START +#undef FLASH_MAX_SIZE + +#define SGE_TIMESTAMP_S 0 +#define SGE_TIMESTAMP_M 0xfffffffffffffffULL +#define SGE_TIMESTAMP_V(x) ((__u64)(x) << SGE_TIMESTAMP_S) +#define SGE_TIMESTAMP_G(x) (((__u64)(x) >> SGE_TIMESTAMP_S) & SGE_TIMESTAMP_M) + +#define I2C_DEV_ADDR_A0 0xa0 +#define I2C_DEV_ADDR_A2 0xa2 +#define I2C_PAGE_SIZE 0x100 +#define SFP_DIAG_TYPE_ADDR 0x5c +#define SFP_DIAG_TYPE_LEN 0x1 +#define SFP_DIAG_ADDRMODE BIT(2) +#define SFP_DIAG_IMPLEMENTED BIT(6) +#define SFF_8472_COMP_ADDR 0x5e +#define SFF_8472_COMP_LEN 0x1 +#define SFF_REV_ADDR 0x1 +#define SFF_REV_LEN 0x1 + +#endif /* __T4_HW_H */ -- cgit v1.2.3