From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/emulex/benet/be_hw.h | 371 ++++++++++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 drivers/net/ethernet/emulex/benet/be_hw.h (limited to 'drivers/net/ethernet/emulex/benet/be_hw.h') diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h new file mode 100644 index 000000000..3476194f0 --- /dev/null +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -0,0 +1,371 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2005-2016 Broadcom. + * All rights reserved. + * + * Contact Information: + * linux-drivers@emulex.com + * + * Emulex + * 3333 Susan Street + * Costa Mesa, CA 92626 + */ + +/********* Mailbox door bell *************/ +/* Used for driver communication with the FW. + * The software must write this register twice to post any command. First, + * it writes the register with hi=1 and the upper bits of the physical address + * for the MAILBOX structure. Software must poll the ready bit until this + * is acknowledged. Then, sotware writes the register with hi=0 with the lower + * bits in the address. It must poll the ready bit until the command is + * complete. Upon completion, the MAILBOX will contain a valid completion + * queue entry. + */ +#define MPU_MAILBOX_DB_OFFSET 0x160 +#define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */ +#define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */ + +#define MPU_EP_CONTROL 0 + +/********** MPU semphore: used for SH & BE *************/ +#define SLIPORT_SOFTRESET_OFFSET 0x5c /* CSR BAR offset */ +#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */ +#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */ +#define POST_STAGE_MASK 0x0000FFFF +#define POST_ERR_MASK 0x1 +#define POST_ERR_SHIFT 31 +#define POST_ERR_RECOVERY_CODE_MASK 0xFFF + +/* Soft Reset register masks */ +#define SLIPORT_SOFTRESET_SR_MASK 0x00000080 /* SR bit */ + +/* MPU semphore POST stage values */ +#define POST_STAGE_AWAITING_HOST_RDY 0x1 /* FW awaiting goahead from host */ +#define POST_STAGE_HOST_RDY 0x2 /* Host has given go-ahed to FW */ +#define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */ +#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */ +#define POST_STAGE_RECOVERABLE_ERR 0xE000 /* Recoverable err detected */ +/* FW has detected a UE and is dumping FAT log data */ +#define POST_STAGE_FAT_LOG_START 0x0D00 +#define POST_STAGE_ARMFW_UE 0xF000 /*FW has asserted an UE*/ + +/* Lancer SLIPORT registers */ +#define SLIPORT_STATUS_OFFSET 0x404 +#define SLIPORT_CONTROL_OFFSET 0x408 +#define SLIPORT_ERROR1_OFFSET 0x40C +#define SLIPORT_ERROR2_OFFSET 0x410 +#define PHYSDEV_CONTROL_OFFSET 0x414 + +#define SLIPORT_STATUS_ERR_MASK 0x80000000 +#define SLIPORT_STATUS_DIP_MASK 0x02000000 +#define SLIPORT_STATUS_RN_MASK 0x01000000 +#define SLIPORT_STATUS_RDY_MASK 0x00800000 +#define SLI_PORT_CONTROL_IP_MASK 0x08000000 +#define PHYSDEV_CONTROL_FW_RESET_MASK 0x00000002 +#define PHYSDEV_CONTROL_DD_MASK 0x00000004 +#define PHYSDEV_CONTROL_INP_MASK 0x40000000 + +#define SLIPORT_ERROR_NO_RESOURCE1 0x2 +#define SLIPORT_ERROR_NO_RESOURCE2 0x9 + +#define SLIPORT_ERROR_FW_RESET1 0x2 +#define SLIPORT_ERROR_FW_RESET2 0x0 + +/********* Memory BAR register ************/ +#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc +/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt + * Disable" may still globally block interrupts in addition to individual + * interrupt masks; a mechanism for the device driver to block all interrupts + * atomically without having to arbitrate for the PCI Interrupt Disable bit + * with the OS. + */ +#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK BIT(29) /* bit 29 */ + +/********* PCI Function Capability *********/ +#define BE_FUNCTION_CAPS_RSS 0x2 +#define BE_FUNCTION_CAPS_SUPER_NIC 0x40 + +/********* Power management (WOL) **********/ +#define PCICFG_PM_CONTROL_OFFSET 0x44 +#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */ + +/********* Online Control Registers *******/ +#define PCICFG_ONLINE0 0xB0 +#define PCICFG_ONLINE1 0xB4 + +/********* UE Status and Mask Registers ***/ +#define PCICFG_UE_STATUS_LOW 0xA0 +#define PCICFG_UE_STATUS_HIGH 0xA4 +#define PCICFG_UE_STATUS_LOW_MASK 0xA8 +#define PCICFG_UE_STATUS_HI_MASK 0xAC + +/******** SLI_INTF ***********************/ +#define SLI_INTF_REG_OFFSET 0x58 +#define SLI_INTF_VALID_MASK 0xE0000000 +#define SLI_INTF_VALID 0xC0000000 +#define SLI_INTF_HINT2_MASK 0x1F000000 +#define SLI_INTF_HINT2_SHIFT 24 +#define SLI_INTF_HINT1_MASK 0x00FF0000 +#define SLI_INTF_HINT1_SHIFT 16 +#define SLI_INTF_FAMILY_MASK 0x00000F00 +#define SLI_INTF_FAMILY_SHIFT 8 +#define SLI_INTF_IF_TYPE_MASK 0x0000F000 +#define SLI_INTF_IF_TYPE_SHIFT 12 +#define SLI_INTF_REV_MASK 0x000000F0 +#define SLI_INTF_REV_SHIFT 4 +#define SLI_INTF_FT_MASK 0x00000001 + +#define SLI_INTF_TYPE_2 2 +#define SLI_INTF_TYPE_3 3 + +/********* ISR0 Register offset **********/ +#define CEV_ISR0_OFFSET 0xC18 +#define CEV_ISR_SIZE 4 + +/********* Event Q door bell *************/ +#define DB_EQ_OFFSET DB_CQ_OFFSET +#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */ +#define DB_EQ_RING_ID_EXT_MASK 0x3e00 /* bits 9-13 */ +#define DB_EQ_RING_ID_EXT_MASK_SHIFT (2) /* qid bits 9-13 placing at 11-15 */ + +/* Clear the interrupt for this eq */ +#define DB_EQ_CLR_SHIFT (9) /* bit 9 */ +/* Must be 1 */ +#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */ +/* Number of event entries processed */ +#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */ +/* Rearm bit */ +#define DB_EQ_REARM_SHIFT (29) /* bit 29 */ +/* Rearm to interrupt delay encoding */ +#define DB_EQ_R2I_DLY_SHIFT (30) /* bits 30 - 31 */ + +/* Rearm to interrupt (R2I) delay multiplier encoding represents 3 different + * values configured in CEV_REARM2IRPT_DLY_MULT_CSR register. This value is + * programmed by host driver while ringing an EQ doorbell(EQ_DB) if a delay + * between rearming the EQ and next interrupt on this EQ is desired. + */ +#define R2I_DLY_ENC_0 0 /* No delay */ +#define R2I_DLY_ENC_1 1 /* maps to 160us EQ delay */ +#define R2I_DLY_ENC_2 2 /* maps to 96us EQ delay */ +#define R2I_DLY_ENC_3 3 /* maps to 48us EQ delay */ + +/********* Compl Q door bell *************/ +#define DB_CQ_OFFSET 0x120 +#define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */ +#define DB_CQ_RING_ID_EXT_MASK 0x7C00 /* bits 10-14 */ +#define DB_CQ_RING_ID_EXT_MASK_SHIFT (1) /* qid bits 10-14 + placing at 11-15 */ + +/* Number of event entries processed */ +#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */ +/* Rearm bit */ +#define DB_CQ_REARM_SHIFT (29) /* bit 29 */ + +/********** TX ULP door bell *************/ +#define DB_TXULP1_OFFSET 0x60 +#define DB_TXULP_RING_ID_MASK 0x7FF /* bits 0 - 10 */ +/* Number of tx entries posted */ +#define DB_TXULP_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */ +#define DB_TXULP_NUM_POSTED_MASK 0x3FFF /* bits 16 - 29 */ + +/********** RQ(erx) door bell ************/ +#define DB_RQ_OFFSET 0x100 +#define DB_RQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */ +/* Number of rx frags posted */ +#define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */ + +/********** MCC door bell ************/ +#define DB_MCCQ_OFFSET 0x140 +#define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */ +/* Number of entries posted */ +#define DB_MCCQ_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */ + +/********** SRIOV VF PCICFG OFFSET ********/ +#define SRIOV_VF_PCICFG_OFFSET (4096) + +/********** FAT TABLE ********/ +#define RETRIEVE_FAT 0 +#define QUERY_FAT 1 + +/************* Rx Packet Type Encoding **************/ +#define BE_UNICAST_PACKET 0 +#define BE_MULTICAST_PACKET 1 +#define BE_BROADCAST_PACKET 2 +#define BE_RSVD_PACKET 3 + +/* + * BE descriptors: host memory data structures whose formats + * are hardwired in BE silicon. + */ +/* Event Queue Descriptor */ +#define EQ_ENTRY_VALID_MASK 0x1 /* bit 0 */ +#define EQ_ENTRY_RES_ID_MASK 0xFFFF /* bits 16 - 31 */ +#define EQ_ENTRY_RES_ID_SHIFT 16 + +struct be_eq_entry { + u32 evt; +}; + +/* TX Queue Descriptor */ +#define ETH_WRB_FRAG_LEN_MASK 0xFFFF +struct be_eth_wrb { + __le32 frag_pa_hi; /* dword 0 */ + __le32 frag_pa_lo; /* dword 1 */ + u32 rsvd0; /* dword 2 */ + __le32 frag_len; /* dword 3: bits 0 - 15 */ +} __packed; + +/* Pseudo amap definition for eth_hdr_wrb in which each bit of the + * actual structure is defined as a byte : used to calculate + * offset/shift/mask of each field */ +struct amap_eth_hdr_wrb { + u8 rsvd0[32]; /* dword 0 */ + u8 rsvd1[32]; /* dword 1 */ + u8 complete; /* dword 2 */ + u8 event; + u8 crc; + u8 forward; + u8 lso6; + u8 mgmt; + u8 ipcs; + u8 udpcs; + u8 tcpcs; + u8 lso; + u8 vlan; + u8 gso[2]; + u8 num_wrb[5]; + u8 lso_mss[14]; + u8 len[16]; /* dword 3 */ + u8 vlan_tag[16]; +} __packed; + +#define TX_HDR_WRB_COMPL 1 /* word 2 */ +#define TX_HDR_WRB_EVT BIT(1) /* word 2 */ +#define TX_HDR_WRB_NUM_SHIFT 13 /* word 2: bits 13:17 */ +#define TX_HDR_WRB_NUM_MASK 0x1F /* word 2: bits 13:17 */ + +struct be_eth_hdr_wrb { + __le32 dw[4]; +}; + +/********* Tx Compl Status Encoding *********/ +#define BE_TX_COMP_HDR_PARSE_ERR 0x2 +#define BE_TX_COMP_NDMA_ERR 0x3 +#define BE_TX_COMP_ACL_ERR 0x5 + +#define LANCER_TX_COMP_LSO_ERR 0x1 +#define LANCER_TX_COMP_HSW_DROP_MAC_ERR 0x3 +#define LANCER_TX_COMP_HSW_DROP_VLAN_ERR 0x5 +#define LANCER_TX_COMP_QINQ_ERR 0x7 +#define LANCER_TX_COMP_SGE_ERR 0x9 +#define LANCER_TX_COMP_PARITY_ERR 0xb +#define LANCER_TX_COMP_DMA_ERR 0xd + +/* TX Compl Queue Descriptor */ + +/* Pseudo amap definition for eth_tx_compl in which each bit of the + * actual structure is defined as a byte: used to calculate + * offset/shift/mask of each field */ +struct amap_eth_tx_compl { + u8 wrb_index[16]; /* dword 0 */ + u8 ct[2]; /* dword 0 */ + u8 port[2]; /* dword 0 */ + u8 rsvd0[8]; /* dword 0 */ + u8 status[4]; /* dword 0 */ + u8 user_bytes[16]; /* dword 1 */ + u8 nwh_bytes[8]; /* dword 1 */ + u8 lso; /* dword 1 */ + u8 cast_enc[2]; /* dword 1 */ + u8 rsvd1[5]; /* dword 1 */ + u8 rsvd2[32]; /* dword 2 */ + u8 pkts[16]; /* dword 3 */ + u8 ringid[11]; /* dword 3 */ + u8 hash_val[4]; /* dword 3 */ + u8 valid; /* dword 3 */ +} __packed; + +struct be_eth_tx_compl { + u32 dw[4]; +}; + +/* RX Queue Descriptor */ +struct be_eth_rx_d { + u32 fragpa_hi; + u32 fragpa_lo; +}; + +/* RX Compl Queue Descriptor */ + +/* Pseudo amap definition for BE2 and BE3 legacy mode eth_rx_compl in which + * each bit of the actual structure is defined as a byte: used to calculate + * offset/shift/mask of each field */ +struct amap_eth_rx_compl_v0 { + u8 vlan_tag[16]; /* dword 0 */ + u8 pktsize[14]; /* dword 0 */ + u8 port; /* dword 0 */ + u8 ip_opt; /* dword 0 */ + u8 err; /* dword 1 */ + u8 rsshp; /* dword 1 */ + u8 ipf; /* dword 1 */ + u8 tcpf; /* dword 1 */ + u8 udpf; /* dword 1 */ + u8 ipcksm; /* dword 1 */ + u8 l4_cksm; /* dword 1 */ + u8 ip_version; /* dword 1 */ + u8 macdst[6]; /* dword 1 */ + u8 vtp; /* dword 1 */ + u8 ip_frag; /* dword 1 */ + u8 fragndx[10]; /* dword 1 */ + u8 ct[2]; /* dword 1 */ + u8 sw; /* dword 1 */ + u8 numfrags[3]; /* dword 1 */ + u8 rss_flush; /* dword 2 */ + u8 cast_enc[2]; /* dword 2 */ + u8 qnq; /* dword 2 */ + u8 rss_bank; /* dword 2 */ + u8 rsvd1[23]; /* dword 2 */ + u8 lro_pkt; /* dword 2 */ + u8 rsvd2[2]; /* dword 2 */ + u8 valid; /* dword 2 */ + u8 rsshash[32]; /* dword 3 */ +} __packed; + +/* Pseudo amap definition for BE3 native mode eth_rx_compl in which + * each bit of the actual structure is defined as a byte: used to calculate + * offset/shift/mask of each field */ +struct amap_eth_rx_compl_v1 { + u8 vlan_tag[16]; /* dword 0 */ + u8 pktsize[14]; /* dword 0 */ + u8 vtp; /* dword 0 */ + u8 ip_opt; /* dword 0 */ + u8 err; /* dword 1 */ + u8 rsshp; /* dword 1 */ + u8 ipf; /* dword 1 */ + u8 tcpf; /* dword 1 */ + u8 udpf; /* dword 1 */ + u8 ipcksm; /* dword 1 */ + u8 l4_cksm; /* dword 1 */ + u8 ip_version; /* dword 1 */ + u8 macdst[7]; /* dword 1 */ + u8 rsvd0; /* dword 1 */ + u8 fragndx[10]; /* dword 1 */ + u8 ct[2]; /* dword 1 */ + u8 sw; /* dword 1 */ + u8 numfrags[3]; /* dword 1 */ + u8 rss_flush; /* dword 2 */ + u8 cast_enc[2]; /* dword 2 */ + u8 qnq; /* dword 2 */ + u8 rss_bank; /* dword 2 */ + u8 port[2]; /* dword 2 */ + u8 vntagp; /* dword 2 */ + u8 header_len[8]; /* dword 2 */ + u8 header_split[2]; /* dword 2 */ + u8 rsvd1[12]; /* dword 2 */ + u8 tunneled; + u8 valid; /* dword 2 */ + u8 rsshash[32]; /* dword 3 */ +} __packed; + +struct be_eth_rx_compl { + u32 dw[4]; +}; -- cgit v1.2.3