From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/freescale/fman/fman_sp.c | 142 ++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 drivers/net/ethernet/freescale/fman/fman_sp.c (limited to 'drivers/net/ethernet/freescale/fman/fman_sp.c') diff --git a/drivers/net/ethernet/freescale/fman/fman_sp.c b/drivers/net/ethernet/freescale/fman/fman_sp.c new file mode 100644 index 000000000..0fac60aa5 --- /dev/null +++ b/drivers/net/ethernet/freescale/fman/fman_sp.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * Copyright 2008 - 2015 Freescale Semiconductor Inc. + */ + +#include "fman_sp.h" +#include "fman.h" + +void fman_sp_set_buf_pools_in_asc_order_of_buf_sizes(struct fman_ext_pools + *fm_ext_pools, + u8 *ordered_array, + u16 *sizes_array) +{ + u16 buf_size = 0; + int i = 0, j = 0, k = 0; + + /* First we copy the external buffers pools information + * to an ordered local array + */ + for (i = 0; i < fm_ext_pools->num_of_pools_used; i++) { + /* get pool size */ + buf_size = fm_ext_pools->ext_buf_pool[i].size; + + /* keep sizes in an array according to poolId + * for direct access + */ + sizes_array[fm_ext_pools->ext_buf_pool[i].id] = buf_size; + + /* save poolId in an ordered array according to size */ + for (j = 0; j <= i; j++) { + /* this is the next free place in the array */ + if (j == i) + ordered_array[i] = + fm_ext_pools->ext_buf_pool[i].id; + else { + /* find the right place for this poolId */ + if (buf_size < sizes_array[ordered_array[j]]) { + /* move the pool_ids one place ahead + * to make room for this poolId + */ + for (k = i; k > j; k--) + ordered_array[k] = + ordered_array[k - 1]; + + /* now k==j, this is the place for + * the new size + */ + ordered_array[k] = + fm_ext_pools->ext_buf_pool[i].id; + break; + } + } + } + } +} +EXPORT_SYMBOL(fman_sp_set_buf_pools_in_asc_order_of_buf_sizes); + +int fman_sp_build_buffer_struct(struct fman_sp_int_context_data_copy * + int_context_data_copy, + struct fman_buffer_prefix_content * + buffer_prefix_content, + struct fman_sp_buf_margins *buf_margins, + struct fman_sp_buffer_offsets *buffer_offsets, + u8 *internal_buf_offset) +{ + u32 tmp; + + /* Align start of internal context data to 16 byte */ + int_context_data_copy->ext_buf_offset = (u16) + ((buffer_prefix_content->priv_data_size & (OFFSET_UNITS - 1)) ? + ((buffer_prefix_content->priv_data_size + OFFSET_UNITS) & + ~(u16)(OFFSET_UNITS - 1)) : + buffer_prefix_content->priv_data_size); + + /* Translate margin and int_context params to FM parameters */ + /* Initialize with illegal value. Later we'll set legal values. */ + buffer_offsets->prs_result_offset = (u32)ILLEGAL_BASE; + buffer_offsets->time_stamp_offset = (u32)ILLEGAL_BASE; + buffer_offsets->hash_result_offset = (u32)ILLEGAL_BASE; + + /* Internally the driver supports 4 options + * 1. prsResult/timestamp/hashResult selection (in fact 8 options, + * but for simplicity we'll + * relate to it as 1). + * 2. All IC context (from AD) not including debug. + */ + + /* This case covers the options under 1 */ + /* Copy size must be in 16-byte granularity. */ + int_context_data_copy->size = + (u16)((buffer_prefix_content->pass_prs_result ? 32 : 0) + + ((buffer_prefix_content->pass_time_stamp || + buffer_prefix_content->pass_hash_result) ? 16 : 0)); + + /* Align start of internal context data to 16 byte */ + int_context_data_copy->int_context_offset = + (u8)(buffer_prefix_content->pass_prs_result ? 32 : + ((buffer_prefix_content->pass_time_stamp || + buffer_prefix_content->pass_hash_result) ? 64 : 0)); + + if (buffer_prefix_content->pass_prs_result) + buffer_offsets->prs_result_offset = + int_context_data_copy->ext_buf_offset; + if (buffer_prefix_content->pass_time_stamp) + buffer_offsets->time_stamp_offset = + buffer_prefix_content->pass_prs_result ? + (int_context_data_copy->ext_buf_offset + + sizeof(struct fman_prs_result)) : + int_context_data_copy->ext_buf_offset; + if (buffer_prefix_content->pass_hash_result) + /* If PR is not requested, whether TS is + * requested or not, IC will be copied from TS + */ + buffer_offsets->hash_result_offset = + buffer_prefix_content->pass_prs_result ? + (int_context_data_copy->ext_buf_offset + + sizeof(struct fman_prs_result) + 8) : + int_context_data_copy->ext_buf_offset + 8; + + if (int_context_data_copy->size) + buf_margins->start_margins = + (u16)(int_context_data_copy->ext_buf_offset + + int_context_data_copy->size); + else + /* No Internal Context passing, STartMargin is + * immediately after private_info + */ + buf_margins->start_margins = + buffer_prefix_content->priv_data_size; + + /* align data start */ + tmp = (u32)(buf_margins->start_margins % + buffer_prefix_content->data_align); + if (tmp) + buf_margins->start_margins += + (buffer_prefix_content->data_align - tmp); + buffer_offsets->data_offset = buf_margins->start_margins; + + return 0; +} +EXPORT_SYMBOL(fman_sp_build_buffer_struct); + -- cgit v1.2.3