From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/intel/ixgb/ixgb_ee.c | 580 ++++++++++++++++++++++++++++++ 1 file changed, 580 insertions(+) create mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_ee.c (limited to 'drivers/net/ethernet/intel/ixgb/ixgb_ee.c') diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c new file mode 100644 index 000000000..129286fc1 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c @@ -0,0 +1,580 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2008 Intel Corporation. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ixgb_hw.h" +#include "ixgb_ee.h" +/* Local prototypes */ +static u16 ixgb_shift_in_bits(struct ixgb_hw *hw); + +static void ixgb_shift_out_bits(struct ixgb_hw *hw, + u16 data, + u16 count); +static void ixgb_standby_eeprom(struct ixgb_hw *hw); + +static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw); + +static void ixgb_cleanup_eeprom(struct ixgb_hw *hw); + +/****************************************************************************** + * Raises the EEPROM's clock input. + * + * hw - Struct containing variables accessed by shared code + * eecd_reg - EECD's current value + *****************************************************************************/ +static void +ixgb_raise_clock(struct ixgb_hw *hw, + u32 *eecd_reg) +{ + /* Raise the clock input to the EEPROM (by setting the SK bit), and then + * wait 50 microseconds. + */ + *eecd_reg = *eecd_reg | IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Lowers the EEPROM's clock input. + * + * hw - Struct containing variables accessed by shared code + * eecd_reg - EECD's current value + *****************************************************************************/ +static void +ixgb_lower_clock(struct ixgb_hw *hw, + u32 *eecd_reg) +{ + /* Lower the clock input to the EEPROM (by clearing the SK bit), and then + * wait 50 microseconds. + */ + *eecd_reg = *eecd_reg & ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Shift data bits out to the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * data - data to send to the EEPROM + * count - number of bits to shift out + *****************************************************************************/ +static void +ixgb_shift_out_bits(struct ixgb_hw *hw, + u16 data, + u16 count) +{ + u32 eecd_reg; + u32 mask; + + /* We need to shift "count" bits out to the EEPROM. So, value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + */ + mask = 0x01 << (count - 1); + eecd_reg = IXGB_READ_REG(hw, EECD); + eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); + do { + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", + * and then raising and then lowering the clock (the SK bit controls + * the clock input to the EEPROM). A "0" is shifted out to the EEPROM + * by setting "DI" to "0" and then raising and then lowering the clock. + */ + eecd_reg &= ~IXGB_EECD_DI; + + if (data & mask) + eecd_reg |= IXGB_EECD_DI; + + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + + udelay(50); + + ixgb_raise_clock(hw, &eecd_reg); + ixgb_lower_clock(hw, &eecd_reg); + + mask = mask >> 1; + + } while (mask); + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eecd_reg &= ~IXGB_EECD_DI; + IXGB_WRITE_REG(hw, EECD, eecd_reg); +} + +/****************************************************************************** + * Shift data bits in from the EEPROM + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static u16 +ixgb_shift_in_bits(struct ixgb_hw *hw) +{ + u32 eecd_reg; + u32 i; + u16 data; + + /* In order to read a register from the EEPROM, we need to shift 16 bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the "DO" + * bit. During this "shifting in" process the "DI" bit should always be + * clear.. + */ + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); + data = 0; + + for (i = 0; i < 16; i++) { + data = data << 1; + ixgb_raise_clock(hw, &eecd_reg); + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_DI); + if (eecd_reg & IXGB_EECD_DO) + data |= 1; + + ixgb_lower_clock(hw, &eecd_reg); + } + + return data; +} + +/****************************************************************************** + * Prepares EEPROM for access + * + * hw - Struct containing variables accessed by shared code + * + * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This + * function should be called before issuing a command to the EEPROM. + *****************************************************************************/ +static void +ixgb_setup_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Clear SK and DI */ + eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI); + IXGB_WRITE_REG(hw, EECD, eecd_reg); + + /* Set CS */ + eecd_reg |= IXGB_EECD_CS; + IXGB_WRITE_REG(hw, EECD, eecd_reg); +} + +/****************************************************************************** + * Returns EEPROM to a "standby" state + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_standby_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Deselect EEPROM */ + eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK); + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Clock high */ + eecd_reg |= IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Select EEPROM */ + eecd_reg |= IXGB_EECD_CS; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Clock low */ + eecd_reg &= ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Raises then lowers the EEPROM's clock pin + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_clock_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Rising edge of clock */ + eecd_reg |= IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Falling edge of clock */ + eecd_reg &= ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Terminates a command by lowering the EEPROM's chip select pin + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_cleanup_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI); + + IXGB_WRITE_REG(hw, EECD, eecd_reg); + + ixgb_clock_eeprom(hw); +} + +/****************************************************************************** + * Waits for the EEPROM to finish the current command. + * + * hw - Struct containing variables accessed by shared code + * + * The command is done when the EEPROM's data out pin goes high. + * + * Returns: + * true: EEPROM data pin is high before timeout. + * false: Time expired. + *****************************************************************************/ +static bool +ixgb_wait_eeprom_command(struct ixgb_hw *hw) +{ + u32 eecd_reg; + u32 i; + + /* Toggle the CS line. This in effect tells to EEPROM to actually execute + * the command in question. + */ + ixgb_standby_eeprom(hw); + + /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will + * signal that the command has been completed by raising the DO signal. + * If DO does not go high in 10 milliseconds, then error out. + */ + for (i = 0; i < 200; i++) { + eecd_reg = IXGB_READ_REG(hw, EECD); + + if (eecd_reg & IXGB_EECD_DO) + return true; + + udelay(50); + } + ASSERT(0); + return false; +} + +/****************************************************************************** + * Verifies that the EEPROM has a valid checksum + * + * hw - Struct containing variables accessed by shared code + * + * Reads the first 64 16 bit words of the EEPROM and sums the values read. + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * valid. + * + * Returns: + * true: Checksum is valid + * false: Checksum is not valid. + *****************************************************************************/ +bool +ixgb_validate_eeprom_checksum(struct ixgb_hw *hw) +{ + u16 checksum = 0; + u16 i; + + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) + checksum += ixgb_read_eeprom(hw, i); + + if (checksum == (u16) EEPROM_SUM) + return true; + else + return false; +} + +/****************************************************************************** + * Calculates the EEPROM checksum and writes it to the EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. + * Writes the difference to word offset 63 of the EEPROM. + *****************************************************************************/ +void +ixgb_update_eeprom_checksum(struct ixgb_hw *hw) +{ + u16 checksum = 0; + u16 i; + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) + checksum += ixgb_read_eeprom(hw, i); + + checksum = (u16) EEPROM_SUM - checksum; + + ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum); +} + +/****************************************************************************** + * Writes a 16 bit word to a given offset in the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * reg - offset within the EEPROM to be written to + * data - 16 bit word to be written to the EEPROM + * + * If ixgb_update_eeprom_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + * + *****************************************************************************/ +void +ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + /* Prepare the EEPROM for writing */ + ixgb_setup_eeprom(hw); + + /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode + * plus 4-bit dummy). This puts the EEPROM into write/erase mode. + */ + ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5); + ixgb_shift_out_bits(hw, 0, 4); + + /* Prepare the EEPROM */ + ixgb_standby_eeprom(hw); + + /* Send the Write command (3-bit opcode + 6-bit addr) */ + ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3); + ixgb_shift_out_bits(hw, offset, 6); + + /* Send the data */ + ixgb_shift_out_bits(hw, data, 16); + + ixgb_wait_eeprom_command(hw); + + /* Recover from write */ + ixgb_standby_eeprom(hw); + + /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit + * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase + * mode. + */ + ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5); + ixgb_shift_out_bits(hw, 0, 4); + + /* Done with writing */ + ixgb_cleanup_eeprom(hw); + + /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ + ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); +} + +/****************************************************************************** + * Reads a 16 bit word from the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of 16 bit word in the EEPROM to read + * + * Returns: + * The 16-bit value read from the eeprom + *****************************************************************************/ +u16 +ixgb_read_eeprom(struct ixgb_hw *hw, + u16 offset) +{ + u16 data; + + /* Prepare the EEPROM for reading */ + ixgb_setup_eeprom(hw); + + /* Send the READ command (opcode + addr) */ + ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3); + /* + * We have a 64 word EEPROM, there are 6 address bits + */ + ixgb_shift_out_bits(hw, offset, 6); + + /* Read the data */ + data = ixgb_shift_in_bits(hw); + + /* End this read operation */ + ixgb_standby_eeprom(hw); + + return data; +} + +/****************************************************************************** + * Reads eeprom and stores data in shared structure. + * Validates eeprom checksum and eeprom signature. + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * true: if eeprom read is successful + * false: otherwise. + *****************************************************************************/ +bool +ixgb_get_eeprom_data(struct ixgb_hw *hw) +{ + u16 i; + u16 checksum = 0; + struct ixgb_ee_map_type *ee_map; + + ENTER(); + + ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + pr_debug("Reading eeprom data\n"); + for (i = 0; i < IXGB_EEPROM_SIZE ; i++) { + u16 ee_data; + ee_data = ixgb_read_eeprom(hw, i); + checksum += ee_data; + hw->eeprom[i] = cpu_to_le16(ee_data); + } + + if (checksum != (u16) EEPROM_SUM) { + pr_debug("Checksum invalid\n"); + /* clear the init_ctrl_reg_1 to signify that the cache is + * invalidated */ + ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); + return false; + } + + if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) + != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { + pr_debug("Signature invalid\n"); + return false; + } + + return true; +} + +/****************************************************************************** + * Local function to check if the eeprom signature is good + * If the eeprom signature is good, calls ixgb)get_eeprom_data. + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * true: eeprom signature was good and the eeprom read was successful + * false: otherwise. + ******************************************************************************/ +static bool +ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) + == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { + return true; + } else { + return ixgb_get_eeprom_data(hw); + } +} + +/****************************************************************************** + * return a word from the eeprom + * + * hw - Struct containing variables accessed by shared code + * index - Offset of eeprom word + * + * Returns: + * Word at indexed offset in eeprom, if valid, 0 otherwise. + ******************************************************************************/ +__le16 +ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index) +{ + + if (index < IXGB_EEPROM_SIZE && ixgb_check_and_get_eeprom_data(hw)) + return hw->eeprom[index]; + + return 0; +} + +/****************************************************************************** + * return the mac address from EEPROM + * + * hw - Struct containing variables accessed by shared code + * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise + * + * Returns: None. + ******************************************************************************/ +void +ixgb_get_ee_mac_addr(struct ixgb_hw *hw, + u8 *mac_addr) +{ + int i; + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + ENTER(); + + if (ixgb_check_and_get_eeprom_data(hw)) { + for (i = 0; i < ETH_ALEN; i++) { + mac_addr[i] = ee_map->mac_addr[i]; + } + pr_debug("eeprom mac address = %pM\n", mac_addr); + } +} + + +/****************************************************************************** + * return the Printed Board Assembly number from EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * PBA number if EEPROM contents are valid, 0 otherwise + ******************************************************************************/ +u32 +ixgb_get_ee_pba_number(struct ixgb_hw *hw) +{ + if (ixgb_check_and_get_eeprom_data(hw)) + return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG]) + | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16); + + return 0; +} + + +/****************************************************************************** + * return the Device Id from EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * Device Id if EEPROM contents are valid, 0 otherwise + ******************************************************************************/ +u16 +ixgb_get_ee_device_id(struct ixgb_hw *hw) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + if (ixgb_check_and_get_eeprom_data(hw)) + return le16_to_cpu(ee_map->device_id); + + return 0; +} + -- cgit v1.2.3