From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/intel/ixgb/ixgb_param.c | 442 +++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_param.c (limited to 'drivers/net/ethernet/intel/ixgb/ixgb_param.c') diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c new file mode 100644 index 000000000..d40f96250 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_param.c @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2008 Intel Corporation. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ixgb.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define IXGB_MAX_NIC 8 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ + +#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET } +#define IXGB_PARAM(X, desc) \ + static int X[IXGB_MAX_NIC+1] \ + = IXGB_PARAM_INIT; \ + static unsigned int num_##X = 0; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); + +/* Transmit Descriptor Count + * + * Valid Range: 64-4096 + * + * Default Value: 256 + */ + +IXGB_PARAM(TxDescriptors, "Number of transmit descriptors"); + +/* Receive Descriptor Count + * + * Valid Range: 64-4096 + * + * Default Value: 1024 + */ + +IXGB_PARAM(RxDescriptors, "Number of receive descriptors"); + +/* User Specified Flow Control Override + * + * Valid Range: 0-3 + * - 0 - No Flow Control + * - 1 - Rx only, respond to PAUSE frames but do not generate them + * - 2 - Tx only, generate PAUSE frames but ignore them on receive + * - 3 - Full Flow Control Support + * + * Default Value: 2 - Tx only (silicon bug avoidance) + */ + +IXGB_PARAM(FlowControl, "Flow Control setting"); + +/* XsumRX - Receive Checksum Offload Enable/Disable + * + * Valid Range: 0, 1 + * - 0 - disables all checksum offload + * - 1 - enables receive IP/TCP/UDP checksum offload + * on 82597 based NICs + * + * Default Value: 1 + */ + +IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); + +/* Transmit Interrupt Delay in units of 0.8192 microseconds + * + * Valid Range: 0-65535 + * + * Default Value: 32 + */ + +IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay"); + +/* Receive Interrupt Delay in units of 0.8192 microseconds + * + * Valid Range: 0-65535 + * + * Default Value: 72 + */ + +IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay"); + +/* Receive Flow control high threshold (when we send a pause frame) + * (FCRTH) + * + * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) + * + * Default Value: 196,608 (0x30000) + */ + +IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold"); + +/* Receive Flow control low threshold (when we send a resume frame) + * (FCRTL) + * + * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) + * must be less than high threshold by at least 8 bytes + * + * Default Value: 163,840 (0x28000) + */ + +IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold"); + +/* Flow control request timeout (how long to pause the link partner's tx) + * (PAP 15:0) + * + * Valid Range: 1 - 65535 + * + * Default Value: 65535 (0xffff) (we'll send an xon if we recover) + */ + +IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout"); + +/* Interrupt Delay Enable + * + * Valid Range: 0, 1 + * + * - 0 - disables transmit interrupt delay + * - 1 - enables transmmit interrupt delay + * + * Default Value: 1 + */ + +IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable"); + + +#define DEFAULT_TIDV 32 +#define MAX_TIDV 0xFFFF +#define MIN_TIDV 0 + +#define DEFAULT_RDTR 72 +#define MAX_RDTR 0xFFFF +#define MIN_RDTR 0 + +#define DEFAULT_FCRTL 0x28000 +#define DEFAULT_FCRTH 0x30000 +#define MIN_FCRTL 0 +#define MAX_FCRTL 0x3FFE8 +#define MIN_FCRTH 8 +#define MAX_FCRTH 0x3FFF0 + +#define MIN_FCPAUSE 1 +#define MAX_FCPAUSE 0xffff +#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */ + +struct ixgb_option { + enum { enable_option, range_option, list_option } type; + const char *name; + const char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + const struct ixgb_opt_list { + int i; + const char *str; + } *p; + } l; + } arg; +}; + +static int +ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + pr_info("%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + pr_info("%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + pr_info("%s set to %i\n", opt->name, *value); + return 0; + } + break; + case list_option: { + int i; + const struct ixgb_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + pr_info("%s\n", ent->str); + return 0; + } + } + } + break; + default: + BUG(); + } + + pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * ixgb_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + **/ + +void +ixgb_check_options(struct ixgb_adapter *adapter) +{ + int bd = adapter->bd_number; + if (bd >= IXGB_MAX_NIC) { + pr_notice("Warning: no configuration for board #%i\n", bd); + pr_notice("Using defaults for all values\n"); + } + + { /* Transmit Descriptor Count */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Transmit Descriptors", + .err = "using default of " __MODULE_STRING(DEFAULT_TXD), + .def = DEFAULT_TXD, + .arg = { .r = { .min = MIN_TXD, + .max = MAX_TXD}} + }; + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + + if (num_TxDescriptors > bd) { + tx_ring->count = TxDescriptors[bd]; + ixgb_validate_option(&tx_ring->count, &opt); + } else { + tx_ring->count = opt.def; + } + tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); + } + { /* Receive Descriptor Count */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Receive Descriptors", + .err = "using default of " __MODULE_STRING(DEFAULT_RXD), + .def = DEFAULT_RXD, + .arg = { .r = { .min = MIN_RXD, + .max = MAX_RXD}} + }; + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + + if (num_RxDescriptors > bd) { + rx_ring->count = RxDescriptors[bd]; + ixgb_validate_option(&rx_ring->count, &opt); + } else { + rx_ring->count = opt.def; + } + rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); + } + { /* Receive Checksum Offload Enable */ + static const struct ixgb_option opt = { + .type = enable_option, + .name = "Receive Checksum Offload", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (num_XsumRX > bd) { + unsigned int rx_csum = XsumRX[bd]; + ixgb_validate_option(&rx_csum, &opt); + adapter->rx_csum = rx_csum; + } else { + adapter->rx_csum = opt.def; + } + } + { /* Flow Control */ + + static const struct ixgb_opt_list fc_list[] = { + { ixgb_fc_none, "Flow Control Disabled" }, + { ixgb_fc_rx_pause, "Flow Control Receive Only" }, + { ixgb_fc_tx_pause, "Flow Control Transmit Only" }, + { ixgb_fc_full, "Flow Control Enabled" }, + { ixgb_fc_default, "Flow Control Hardware Default" } + }; + + static const struct ixgb_option opt = { + .type = list_option, + .name = "Flow Control", + .err = "reading default settings from EEPROM", + .def = ixgb_fc_tx_pause, + .arg = { .l = { .nr = ARRAY_SIZE(fc_list), + .p = fc_list }} + }; + + if (num_FlowControl > bd) { + unsigned int fc = FlowControl[bd]; + ixgb_validate_option(&fc, &opt); + adapter->hw.fc.type = fc; + } else { + adapter->hw.fc.type = opt.def; + } + } + { /* Receive Flow Control High Threshold */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Rx Flow Control High Threshold", + .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH), + .def = DEFAULT_FCRTH, + .arg = { .r = { .min = MIN_FCRTH, + .max = MAX_FCRTH}} + }; + + if (num_RxFCHighThresh > bd) { + adapter->hw.fc.high_water = RxFCHighThresh[bd]; + ixgb_validate_option(&adapter->hw.fc.high_water, &opt); + } else { + adapter->hw.fc.high_water = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring RxFCHighThresh when no RxFC\n"); + } + { /* Receive Flow Control Low Threshold */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Rx Flow Control Low Threshold", + .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL), + .def = DEFAULT_FCRTL, + .arg = { .r = { .min = MIN_FCRTL, + .max = MAX_FCRTL}} + }; + + if (num_RxFCLowThresh > bd) { + adapter->hw.fc.low_water = RxFCLowThresh[bd]; + ixgb_validate_option(&adapter->hw.fc.low_water, &opt); + } else { + adapter->hw.fc.low_water = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring RxFCLowThresh when no RxFC\n"); + } + { /* Flow Control Pause Time Request*/ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Flow Control Pause Time Request", + .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE), + .def = DEFAULT_FCPAUSE, + .arg = { .r = { .min = MIN_FCPAUSE, + .max = MAX_FCPAUSE}} + }; + + if (num_FCReqTimeout > bd) { + unsigned int pause_time = FCReqTimeout[bd]; + ixgb_validate_option(&pause_time, &opt); + adapter->hw.fc.pause_time = pause_time; + } else { + adapter->hw.fc.pause_time = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring FCReqTimeout when no RxFC\n"); + } + /* high low and spacing check for rx flow control thresholds */ + if (adapter->hw.fc.type & ixgb_fc_tx_pause) { + /* high must be greater than low */ + if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) { + /* set defaults */ + pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n"); + adapter->hw.fc.high_water = DEFAULT_FCRTH; + adapter->hw.fc.low_water = DEFAULT_FCRTL; + } + } + { /* Receive Interrupt Delay */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Receive Interrupt Delay", + .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), + .def = DEFAULT_RDTR, + .arg = { .r = { .min = MIN_RDTR, + .max = MAX_RDTR}} + }; + + if (num_RxIntDelay > bd) { + adapter->rx_int_delay = RxIntDelay[bd]; + ixgb_validate_option(&adapter->rx_int_delay, &opt); + } else { + adapter->rx_int_delay = opt.def; + } + } + { /* Transmit Interrupt Delay */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Transmit Interrupt Delay", + .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), + .def = DEFAULT_TIDV, + .arg = { .r = { .min = MIN_TIDV, + .max = MAX_TIDV}} + }; + + if (num_TxIntDelay > bd) { + adapter->tx_int_delay = TxIntDelay[bd]; + ixgb_validate_option(&adapter->tx_int_delay, &opt); + } else { + adapter->tx_int_delay = opt.def; + } + } + + { /* Transmit Interrupt Delay Enable */ + static const struct ixgb_option opt = { + .type = enable_option, + .name = "Tx Interrupt Delay Enable", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (num_IntDelayEnable > bd) { + unsigned int ide = IntDelayEnable[bd]; + ixgb_validate_option(&ide, &opt); + adapter->tx_int_delay_enable = ide; + } else { + adapter->tx_int_delay_enable = opt.def; + } + } +} -- cgit v1.2.3