From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 177 +++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h new file mode 100644 index 000000000..6544c4539 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 1999 - 2018 Intel Corporation. */ + +#ifndef _IXGBE_PHY_H_ +#define _IXGBE_PHY_H_ + +#include "ixgbe_type.h" +#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 +#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 + +/* EEPROM byte offsets */ +#define IXGBE_SFF_IDENTIFIER 0x0 +#define IXGBE_SFF_IDENTIFIER_SFP 0x3 +#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 +#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 +#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 +#define IXGBE_SFF_1GBE_COMP_CODES 0x6 +#define IXGBE_SFF_10GBE_COMP_CODES 0x3 +#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 +#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E +#define IXGBE_SFF_SFF_8472_OSCB 0x6E +#define IXGBE_SFF_SFF_8472_ESCB 0x76 +#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5 +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6 +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7 +#define IXGBE_SFF_QSFP_CONNECTOR 0x82 +#define IXGBE_SFF_QSFP_10GBE_COMP 0x83 +#define IXGBE_SFF_QSFP_1GBE_COMP 0x86 +#define IXGBE_SFF_QSFP_CABLE_LENGTH 0x92 +#define IXGBE_SFF_QSFP_DEVICE_TECH 0x93 + +/* Bitmasks */ +#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 +#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8 +#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4 +#define IXGBE_SFF_1GBASESX_CAPABLE 0x1 +#define IXGBE_SFF_1GBASELX_CAPABLE 0x2 +#define IXGBE_SFF_1GBASET_CAPABLE 0x8 +#define IXGBE_SFF_10GBASESR_CAPABLE 0x10 +#define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 +#define IXGBE_SFF_ADDRESSING_MODE 0x4 +#define IXGBE_SFF_DDM_IMPLEMENTED 0x40 +#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 +#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 +#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23 +#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL 0x0 +#define IXGBE_I2C_EEPROM_READ_MASK 0x100 +#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 +#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 +#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 +#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 +#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 +#define IXGBE_CS4227 0xBE /* CS4227 address */ +#define IXGBE_CS4227_GLOBAL_ID_LSB 0 +#define IXGBE_CS4227_GLOBAL_ID_MSB 1 +#define IXGBE_CS4227_SCRATCH 2 +#define IXGBE_CS4227_EFUSE_PDF_SKU 0x19F +#define IXGBE_CS4223_SKU_ID 0x0010 /* Quad port */ +#define IXGBE_CS4227_SKU_ID 0x0014 /* Dual port */ +#define IXGBE_CS4227_RESET_PENDING 0x1357 +#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5 +#define IXGBE_CS4227_RETRIES 15 +#define IXGBE_CS4227_EFUSE_STATUS 0x0181 +#define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to set speed */ +#define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to set EDC */ +#define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to set speed */ +#define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */ +#define IXGBE_CS4227_EEPROM_STATUS 0x5001 +#define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001 +#define IXGBE_CS4227_SPEED_1G 0x8000 +#define IXGBE_CS4227_SPEED_10G 0 +#define IXGBE_CS4227_EDC_MODE_CX1 0x0002 +#define IXGBE_CS4227_EDC_MODE_SR 0x0004 +#define IXGBE_CS4227_EDC_MODE_DIAG 0x0008 +#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */ +#define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */ +#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */ +#define IXGBE_PE 0xE0 /* Port expander addr */ +#define IXGBE_PE_OUTPUT 1 /* Output reg offset */ +#define IXGBE_PE_CONFIG 3 /* Config reg offset */ +#define IXGBE_PE_BIT1 BIT(1) + +/* Flow control defines */ +#define IXGBE_TAF_SYM_PAUSE 0x400 +#define IXGBE_TAF_ASM_PAUSE 0x800 + +/* Bit-shift macros */ +#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24 +#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16 +#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8 + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600 +#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 +#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100 + +/* I2C SDA and SCL timing parameters for standard mode */ +#define IXGBE_I2C_T_HD_STA 4 +#define IXGBE_I2C_T_LOW 5 +#define IXGBE_I2C_T_HIGH 4 +#define IXGBE_I2C_T_SU_STA 5 +#define IXGBE_I2C_T_HD_DATA 5 +#define IXGBE_I2C_T_SU_DATA 1 +#define IXGBE_I2C_T_RISE 1 +#define IXGBE_I2C_T_FALL 1 +#define IXGBE_I2C_T_SU_STO 4 +#define IXGBE_I2C_T_BUF 5 + +#define IXGBE_SFP_DETECT_RETRIES 2 + +#define IXGBE_TN_LASI_STATUS_REG 0x9005 +#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 + +/* SFP+ SFF-8472 Compliance code */ +#define IXGBE_SFF_SFF_8472_UNSUP 0x00 + +s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw); + +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw); + +/* PHY specific */ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up); +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw); + +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on); +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset); +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data); +s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg, + u16 *val, bool lock); +s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg, + u16 val, bool lock); +#endif /* _IXGBE_PHY_H_ */ -- cgit v1.2.3