From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/ethernet/marvell/octeontx2/af/rvu_cn10k.c | 558 +++++++++++++++++++++ 1 file changed, 558 insertions(+) create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c (limited to 'drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c new file mode 100644 index 000000000..4ad9ff025 --- /dev/null +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Marvell RPM CN10K driver + * + * Copyright (C) 2020 Marvell. + */ + +#include +#include +#include "rvu.h" +#include "cgx.h" +#include "rvu_reg.h" + +/* RVU LMTST */ +#define LMT_TBL_OP_READ 0 +#define LMT_TBL_OP_WRITE 1 +#define LMT_MAP_TABLE_SIZE (128 * 1024) +#define LMT_MAPTBL_ENTRY_SIZE 16 + +/* Function to perform operations (read/write) on lmtst map table */ +static int lmtst_map_table_ops(struct rvu *rvu, u32 index, u64 *val, + int lmt_tbl_op) +{ + void __iomem *lmt_map_base; + u64 tbl_base; + + tbl_base = rvu_read64(rvu, BLKADDR_APR, APR_AF_LMT_MAP_BASE); + + lmt_map_base = ioremap_wc(tbl_base, LMT_MAP_TABLE_SIZE); + if (!lmt_map_base) { + dev_err(rvu->dev, "Failed to setup lmt map table mapping!!\n"); + return -ENOMEM; + } + + if (lmt_tbl_op == LMT_TBL_OP_READ) { + *val = readq(lmt_map_base + index); + } else { + writeq((*val), (lmt_map_base + index)); + /* Flushing the AP interceptor cache to make APR_LMT_MAP_ENTRY_S + * changes effective. Write 1 for flush and read is being used as a + * barrier and sets up a data dependency. Write to 0 after a write + * to 1 to complete the flush. + */ + rvu_write64(rvu, BLKADDR_APR, APR_AF_LMT_CTL, BIT_ULL(0)); + rvu_read64(rvu, BLKADDR_APR, APR_AF_LMT_CTL); + rvu_write64(rvu, BLKADDR_APR, APR_AF_LMT_CTL, 0x00); + } + + iounmap(lmt_map_base); + return 0; +} + +#define LMT_MAP_TBL_W1_OFF 8 +static u32 rvu_get_lmtst_tbl_index(struct rvu *rvu, u16 pcifunc) +{ + return ((rvu_get_pf(pcifunc) * rvu->hw->total_vfs) + + (pcifunc & RVU_PFVF_FUNC_MASK)) * LMT_MAPTBL_ENTRY_SIZE; +} + +static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc, + u64 iova, u64 *lmt_addr) +{ + u64 pa, val, pf; + int err; + + if (!iova) { + dev_err(rvu->dev, "%s Requested Null address for transulation\n", __func__); + return -EINVAL; + } + + rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_REQ, iova); + pf = rvu_get_pf(pcifunc) & 0x1F; + val = BIT_ULL(63) | BIT_ULL(14) | BIT_ULL(13) | pf << 8 | + ((pcifunc & RVU_PFVF_FUNC_MASK) & 0xFF); + rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_TXN_REQ, val); + + err = rvu_poll_reg(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS, BIT_ULL(0), false); + if (err) { + dev_err(rvu->dev, "%s LMTLINE iova transulation failed\n", __func__); + return err; + } + val = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS); + if (val & ~0x1ULL) { + dev_err(rvu->dev, "%s LMTLINE iova transulation failed err:%llx\n", __func__, val); + return -EIO; + } + /* PA[51:12] = RVU_AF_SMMU_TLN_FLIT0[57:18] + * PA[11:0] = IOVA[11:0] + */ + pa = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_TLN_FLIT0) >> 18; + pa &= GENMASK_ULL(39, 0); + *lmt_addr = (pa << 12) | (iova & 0xFFF); + + return 0; +} + +static int rvu_update_lmtaddr(struct rvu *rvu, u16 pcifunc, u64 lmt_addr) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); + u32 tbl_idx; + int err = 0; + u64 val; + + /* Read the current lmt addr of pcifunc */ + tbl_idx = rvu_get_lmtst_tbl_index(rvu, pcifunc); + err = lmtst_map_table_ops(rvu, tbl_idx, &val, LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + tbl_idx, err); + return err; + } + + /* Storing the seondary's lmt base address as this needs to be + * reverted in FLR. Also making sure this default value doesn't + * get overwritten on multiple calls to this mailbox. + */ + if (!pfvf->lmt_base_addr) + pfvf->lmt_base_addr = val; + + /* Update the LMT table with new addr */ + err = lmtst_map_table_ops(rvu, tbl_idx, &lmt_addr, LMT_TBL_OP_WRITE); + if (err) { + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx, err); + return err; + } + return 0; +} + +int rvu_mbox_handler_lmtst_tbl_setup(struct rvu *rvu, + struct lmtst_tbl_setup_req *req, + struct msg_rsp *rsp) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc); + u32 pri_tbl_idx, tbl_idx; + u64 lmt_addr; + int err = 0; + u64 val; + + /* Check if PF_FUNC wants to use it's own local memory as LMTLINE + * region, if so, convert that IOVA to physical address and + * populate LMT table with that address + */ + if (req->use_local_lmt_region) { + err = rvu_get_lmtaddr(rvu, req->hdr.pcifunc, + req->lmt_iova, &lmt_addr); + if (err < 0) + return err; + + /* Update the lmt addr for this PFFUNC in the LMT table */ + err = rvu_update_lmtaddr(rvu, req->hdr.pcifunc, lmt_addr); + if (err) + return err; + } + + /* Reconfiguring lmtst map table in lmt region shared mode i.e. make + * multiple PF_FUNCs to share an LMTLINE region, so primary/base + * pcifunc (which is passed as an argument to mailbox) is the one + * whose lmt base address will be shared among other secondary + * pcifunc (will be the one who is calling this mailbox). + */ + if (req->base_pcifunc) { + /* Calculating the LMT table index equivalent to primary + * pcifunc. + */ + pri_tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->base_pcifunc); + + /* Read the base lmt addr of the primary pcifunc */ + err = lmtst_map_table_ops(rvu, pri_tbl_idx, &val, + LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + pri_tbl_idx, err); + goto error; + } + + /* Update the base lmt addr of secondary with primary's base + * lmt addr. + */ + err = rvu_update_lmtaddr(rvu, req->hdr.pcifunc, val); + if (err) + return err; + } + + /* This mailbox can also be used to update word1 of APR_LMT_MAP_ENTRY_S + * like enabling scheduled LMTST, disable LMTLINE prefetch, disable + * early completion for ordered LMTST. + */ + if (req->sch_ena || req->dis_sched_early_comp || req->dis_line_pref) { + tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->hdr.pcifunc); + err = lmtst_map_table_ops(rvu, tbl_idx + LMT_MAP_TBL_W1_OFF, + &val, LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + tbl_idx + LMT_MAP_TBL_W1_OFF, err); + goto error; + } + + /* Storing lmt map table entry word1 default value as this needs + * to be reverted in FLR. Also making sure this default value + * doesn't get overwritten on multiple calls to this mailbox. + */ + if (!pfvf->lmt_map_ent_w1) + pfvf->lmt_map_ent_w1 = val; + + /* Disable early completion for Ordered LMTSTs. */ + if (req->dis_sched_early_comp) + val |= (req->dis_sched_early_comp << + APR_LMT_MAP_ENT_DIS_SCH_CMP_SHIFT); + /* Enable scheduled LMTST */ + if (req->sch_ena) + val |= (req->sch_ena << APR_LMT_MAP_ENT_SCH_ENA_SHIFT) | + req->ssow_pf_func; + /* Disables LMTLINE prefetch before receiving store data. */ + if (req->dis_line_pref) + val |= (req->dis_line_pref << + APR_LMT_MAP_ENT_DIS_LINE_PREF_SHIFT); + + err = lmtst_map_table_ops(rvu, tbl_idx + LMT_MAP_TBL_W1_OFF, + &val, LMT_TBL_OP_WRITE); + if (err) { + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx + LMT_MAP_TBL_W1_OFF, err); + goto error; + } + } + +error: + return err; +} + +/* Resetting the lmtst map table to original base addresses */ +void rvu_reset_lmt_map_tbl(struct rvu *rvu, u16 pcifunc) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); + u32 tbl_idx; + int err; + + if (is_rvu_otx2(rvu)) + return; + + if (pfvf->lmt_base_addr || pfvf->lmt_map_ent_w1) { + /* This corresponds to lmt map table index */ + tbl_idx = rvu_get_lmtst_tbl_index(rvu, pcifunc); + /* Reverting back original lmt base addr for respective + * pcifunc. + */ + if (pfvf->lmt_base_addr) { + err = lmtst_map_table_ops(rvu, tbl_idx, + &pfvf->lmt_base_addr, + LMT_TBL_OP_WRITE); + if (err) + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx, err); + pfvf->lmt_base_addr = 0; + } + /* Reverting back to orginal word1 val of lmtst map table entry + * which underwent changes. + */ + if (pfvf->lmt_map_ent_w1) { + err = lmtst_map_table_ops(rvu, + tbl_idx + LMT_MAP_TBL_W1_OFF, + &pfvf->lmt_map_ent_w1, + LMT_TBL_OP_WRITE); + if (err) + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx + LMT_MAP_TBL_W1_OFF, err); + pfvf->lmt_map_ent_w1 = 0; + } + } +} + +int rvu_set_channels_base(struct rvu *rvu) +{ + u16 nr_lbk_chans, nr_sdp_chans, nr_cgx_chans, nr_cpt_chans; + u16 sdp_chan_base, cgx_chan_base, cpt_chan_base; + struct rvu_hwinfo *hw = rvu->hw; + u64 nix_const, nix_const1; + int blkaddr; + + blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, 0); + if (blkaddr < 0) + return blkaddr; + + nix_const = rvu_read64(rvu, blkaddr, NIX_AF_CONST); + nix_const1 = rvu_read64(rvu, blkaddr, NIX_AF_CONST1); + + hw->cgx = (nix_const >> 12) & 0xFULL; + hw->lmac_per_cgx = (nix_const >> 8) & 0xFULL; + hw->cgx_links = hw->cgx * hw->lmac_per_cgx; + hw->lbk_links = (nix_const >> 24) & 0xFULL; + hw->cpt_links = (nix_const >> 44) & 0xFULL; + hw->sdp_links = 1; + + hw->cgx_chan_base = NIX_CHAN_CGX_LMAC_CHX(0, 0, 0); + hw->lbk_chan_base = NIX_CHAN_LBK_CHX(0, 0); + hw->sdp_chan_base = NIX_CHAN_SDP_CH_START; + + /* No Programmable channels */ + if (!(nix_const & BIT_ULL(60))) + return 0; + + hw->cap.programmable_chans = true; + + /* If programmable channels are present then configure + * channels such that all channel numbers are contiguous + * leaving no holes. This way the new CPT channels can be + * accomodated. The order of channel numbers assigned is + * LBK, SDP, CGX and CPT. Also the base channel number + * of a block must be multiple of number of channels + * of the block. + */ + nr_lbk_chans = (nix_const >> 16) & 0xFFULL; + nr_sdp_chans = nix_const1 & 0xFFFULL; + nr_cgx_chans = nix_const & 0xFFULL; + nr_cpt_chans = (nix_const >> 32) & 0xFFFULL; + + sdp_chan_base = hw->lbk_chan_base + hw->lbk_links * nr_lbk_chans; + /* Round up base channel to multiple of number of channels */ + hw->sdp_chan_base = ALIGN(sdp_chan_base, nr_sdp_chans); + + cgx_chan_base = hw->sdp_chan_base + hw->sdp_links * nr_sdp_chans; + hw->cgx_chan_base = ALIGN(cgx_chan_base, nr_cgx_chans); + + cpt_chan_base = hw->cgx_chan_base + hw->cgx_links * nr_cgx_chans; + hw->cpt_chan_base = ALIGN(cpt_chan_base, nr_cpt_chans); + + /* Out of 4096 channels start CPT from 2048 so + * that MSB for CPT channels is always set + */ + if (cpt_chan_base <= NIX_CHAN_CPT_CH_START) { + hw->cpt_chan_base = NIX_CHAN_CPT_CH_START; + } else { + dev_err(rvu->dev, + "CPT channels could not fit in the range 2048-4095\n"); + return -EINVAL; + } + + return 0; +} + +#define LBK_CONNECT_NIXX(a) (0x0 + (a)) + +static void __rvu_lbk_set_chans(struct rvu *rvu, void __iomem *base, + u64 offset, int lbkid, u16 chans) +{ + struct rvu_hwinfo *hw = rvu->hw; + u64 cfg; + + cfg = readq(base + offset); + cfg &= ~(LBK_LINK_CFG_RANGE_MASK | + LBK_LINK_CFG_ID_MASK | LBK_LINK_CFG_BASE_MASK); + cfg |= FIELD_PREP(LBK_LINK_CFG_RANGE_MASK, ilog2(chans)); + cfg |= FIELD_PREP(LBK_LINK_CFG_ID_MASK, lbkid); + cfg |= FIELD_PREP(LBK_LINK_CFG_BASE_MASK, hw->lbk_chan_base); + + writeq(cfg, base + offset); +} + +static void rvu_lbk_set_channels(struct rvu *rvu) +{ + struct pci_dev *pdev = NULL; + void __iomem *base; + u64 lbk_const; + u8 src, dst; + u16 chans; + + /* To loopback packets between multiple NIX blocks + * mutliple LBK blocks are needed. With two NIX blocks, + * four LBK blocks are needed and each LBK block + * source and destination are as follows: + * LBK0 - source NIX0 and destination NIX1 + * LBK1 - source NIX0 and destination NIX1 + * LBK2 - source NIX1 and destination NIX0 + * LBK3 - source NIX1 and destination NIX1 + * As per the HRM channel numbers should be programmed as: + * P2X and X2P of LBK0 as same + * P2X and X2P of LBK3 as same + * P2X of LBK1 and X2P of LBK2 as same + * P2X of LBK2 and X2P of LBK1 as same + */ + while (true) { + pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM, + PCI_DEVID_OCTEONTX2_LBK, pdev); + if (!pdev) + return; + + base = pci_ioremap_bar(pdev, 0); + if (!base) + goto err_put; + + lbk_const = readq(base + LBK_CONST); + chans = FIELD_GET(LBK_CONST_CHANS, lbk_const); + dst = FIELD_GET(LBK_CONST_DST, lbk_const); + src = FIELD_GET(LBK_CONST_SRC, lbk_const); + + if (src == dst) { + if (src == LBK_CONNECT_NIXX(0)) { /* LBK0 */ + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_X2P, + 0, chans); + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_P2X, + 0, chans); + } else if (src == LBK_CONNECT_NIXX(1)) { /* LBK3 */ + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_X2P, + 1, chans); + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_P2X, + 1, chans); + } + } else { + if (src == LBK_CONNECT_NIXX(0)) { /* LBK1 */ + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_X2P, + 0, chans); + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_P2X, + 1, chans); + } else if (src == LBK_CONNECT_NIXX(1)) { /* LBK2 */ + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_X2P, + 1, chans); + __rvu_lbk_set_chans(rvu, base, LBK_LINK_CFG_P2X, + 0, chans); + } + } + iounmap(base); + } +err_put: + pci_dev_put(pdev); +} + +static void __rvu_nix_set_channels(struct rvu *rvu, int blkaddr) +{ + u64 nix_const1 = rvu_read64(rvu, blkaddr, NIX_AF_CONST1); + u64 nix_const = rvu_read64(rvu, blkaddr, NIX_AF_CONST); + u16 cgx_chans, lbk_chans, sdp_chans, cpt_chans; + struct rvu_hwinfo *hw = rvu->hw; + int link, nix_link = 0; + u16 start; + u64 cfg; + + cgx_chans = nix_const & 0xFFULL; + lbk_chans = (nix_const >> 16) & 0xFFULL; + sdp_chans = nix_const1 & 0xFFFULL; + cpt_chans = (nix_const >> 32) & 0xFFFULL; + + start = hw->cgx_chan_base; + for (link = 0; link < hw->cgx_links; link++, nix_link++) { + cfg = rvu_read64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link)); + cfg &= ~(NIX_AF_LINKX_BASE_MASK | NIX_AF_LINKX_RANGE_MASK); + cfg |= FIELD_PREP(NIX_AF_LINKX_RANGE_MASK, ilog2(cgx_chans)); + cfg |= FIELD_PREP(NIX_AF_LINKX_BASE_MASK, start); + rvu_write64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link), cfg); + start += cgx_chans; + } + + start = hw->lbk_chan_base; + for (link = 0; link < hw->lbk_links; link++, nix_link++) { + cfg = rvu_read64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link)); + cfg &= ~(NIX_AF_LINKX_BASE_MASK | NIX_AF_LINKX_RANGE_MASK); + cfg |= FIELD_PREP(NIX_AF_LINKX_RANGE_MASK, ilog2(lbk_chans)); + cfg |= FIELD_PREP(NIX_AF_LINKX_BASE_MASK, start); + rvu_write64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link), cfg); + start += lbk_chans; + } + + start = hw->sdp_chan_base; + for (link = 0; link < hw->sdp_links; link++, nix_link++) { + cfg = rvu_read64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link)); + cfg &= ~(NIX_AF_LINKX_BASE_MASK | NIX_AF_LINKX_RANGE_MASK); + cfg |= FIELD_PREP(NIX_AF_LINKX_RANGE_MASK, ilog2(sdp_chans)); + cfg |= FIELD_PREP(NIX_AF_LINKX_BASE_MASK, start); + rvu_write64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link), cfg); + start += sdp_chans; + } + + start = hw->cpt_chan_base; + for (link = 0; link < hw->cpt_links; link++, nix_link++) { + cfg = rvu_read64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link)); + cfg &= ~(NIX_AF_LINKX_BASE_MASK | NIX_AF_LINKX_RANGE_MASK); + cfg |= FIELD_PREP(NIX_AF_LINKX_RANGE_MASK, ilog2(cpt_chans)); + cfg |= FIELD_PREP(NIX_AF_LINKX_BASE_MASK, start); + rvu_write64(rvu, blkaddr, NIX_AF_LINKX_CFG(nix_link), cfg); + start += cpt_chans; + } +} + +static void rvu_nix_set_channels(struct rvu *rvu) +{ + int blkaddr = 0; + + blkaddr = rvu_get_next_nix_blkaddr(rvu, blkaddr); + while (blkaddr) { + __rvu_nix_set_channels(rvu, blkaddr); + blkaddr = rvu_get_next_nix_blkaddr(rvu, blkaddr); + } +} + +static void __rvu_rpm_set_channels(int cgxid, int lmacid, u16 base) +{ + u64 cfg; + + cfg = cgx_lmac_read(cgxid, lmacid, RPMX_CMRX_LINK_CFG); + cfg &= ~(RPMX_CMRX_LINK_BASE_MASK | RPMX_CMRX_LINK_RANGE_MASK); + + /* There is no read-only constant register to read + * the number of channels for LMAC and it is always 16. + */ + cfg |= FIELD_PREP(RPMX_CMRX_LINK_RANGE_MASK, ilog2(16)); + cfg |= FIELD_PREP(RPMX_CMRX_LINK_BASE_MASK, base); + cgx_lmac_write(cgxid, lmacid, RPMX_CMRX_LINK_CFG, cfg); +} + +static void rvu_rpm_set_channels(struct rvu *rvu) +{ + struct rvu_hwinfo *hw = rvu->hw; + u16 base = hw->cgx_chan_base; + int cgx, lmac; + + for (cgx = 0; cgx < rvu->cgx_cnt_max; cgx++) { + for (lmac = 0; lmac < hw->lmac_per_cgx; lmac++) { + __rvu_rpm_set_channels(cgx, lmac, base); + base += 16; + } + } +} + +void rvu_program_channels(struct rvu *rvu) +{ + struct rvu_hwinfo *hw = rvu->hw; + + if (!hw->cap.programmable_chans) + return; + + rvu_nix_set_channels(rvu); + rvu_lbk_set_channels(rvu); + rvu_rpm_set_channels(rvu); +} + +void rvu_nix_block_cn10k_init(struct rvu *rvu, struct nix_hw *nix_hw) +{ + int blkaddr = nix_hw->blkaddr; + u64 cfg; + + /* Set AF vWQE timer interval to a LF configurable range of + * 6.4us to 1.632ms. + */ + rvu_write64(rvu, blkaddr, NIX_AF_VWQE_TIMER, 0x3FULL); + + /* Enable NIX RX stream and global conditional clock to + * avoild multiple free of NPA buffers. + */ + cfg = rvu_read64(rvu, blkaddr, NIX_AF_CFG); + cfg |= BIT_ULL(1) | BIT_ULL(2); + rvu_write64(rvu, blkaddr, NIX_AF_CFG, cfg); +} -- cgit v1.2.3