From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.h | 171 +++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h (limited to 'drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h new file mode 100644 index 000000000..93cac2c26 --- /dev/null +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Marvell RVU Ethernet driver + * + * Copyright (C) 2020 Marvell. + * + */ + +#ifndef OTX2_TXRX_H +#define OTX2_TXRX_H + +#include +#include +#include +#include + +#define LBK_CHAN_BASE 0x000 +#define SDP_CHAN_BASE 0x700 +#define CGX_CHAN_BASE 0x800 + +#define OTX2_DATA_ALIGN(X) ALIGN(X, OTX2_ALIGN) +#define OTX2_HEAD_ROOM OTX2_ALIGN + +#define OTX2_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN) +#define OTX2_MIN_MTU 60 + +#define OTX2_MAX_GSO_SEGS 255 +#define OTX2_MAX_FRAGS_IN_SQE 9 + +#define MAX_XDP_MTU (1530 - OTX2_ETH_HLEN) + +/* Rx buffer size should be in multiples of 128bytes */ +#define RCV_FRAG_LEN1(x) \ + ((OTX2_HEAD_ROOM + OTX2_DATA_ALIGN(x)) + \ + OTX2_DATA_ALIGN(sizeof(struct skb_shared_info))) + +/* Prefer 2048 byte buffers for better last level cache + * utilization or data distribution across regions. + */ +#define RCV_FRAG_LEN(x) \ + ((RCV_FRAG_LEN1(x) < 2048) ? 2048 : RCV_FRAG_LEN1(x)) + +#define DMA_BUFFER_LEN(x) ((x) - OTX2_HEAD_ROOM) + +/* IRQ triggered when NIX_LF_CINTX_CNT[ECOUNT] + * is equal to this value. + */ +#define CQ_CQE_THRESH_DEFAULT 10 + +/* IRQ triggered when NIX_LF_CINTX_CNT[ECOUNT] + * is nonzero and this much time elapses after that. + */ +#define CQ_TIMER_THRESH_DEFAULT 1 /* 1 usec */ +#define CQ_TIMER_THRESH_MAX 25 /* 25 usec */ + +/* Min number of CQs (of the ones mapped to this CINT) + * with valid CQEs. + */ +#define CQ_QCOUNT_DEFAULT 1 + +#define CQ_OP_STAT_OP_ERR 63 +#define CQ_OP_STAT_CQ_ERR 46 + +struct queue_stats { + u64 bytes; + u64 pkts; +}; + +struct otx2_rcv_queue { + struct queue_stats stats; +}; + +struct sg_list { + u16 num_segs; + u64 skb; + u64 size[OTX2_MAX_FRAGS_IN_SQE]; + u64 dma_addr[OTX2_MAX_FRAGS_IN_SQE]; +}; + +struct otx2_snd_queue { + u8 aura_id; + u16 head; + u16 cons_head; + u16 sqe_size; + u32 sqe_cnt; + u16 num_sqbs; + u16 sqe_thresh; + u8 sqe_per_sqb; + u64 io_addr; + u64 *aura_fc_addr; + u64 *lmt_addr; + void *sqe_base; + struct qmem *sqe; + struct qmem *tso_hdrs; + struct sg_list *sg; + struct qmem *timestamps; + struct queue_stats stats; + u16 sqb_count; + u64 *sqb_ptrs; +} ____cacheline_aligned_in_smp; + +enum cq_type { + CQ_RX, + CQ_TX, + CQ_XDP, + CQS_PER_CINT = 3, /* RQ + SQ + XDP */ +}; + +struct otx2_cq_poll { + void *dev; +#define CINT_INVALID_CQ 255 + u8 cint_idx; + u8 cq_ids[CQS_PER_CINT]; + struct dim dim; + struct napi_struct napi; +}; + +struct otx2_pool { + struct qmem *stack; + struct qmem *fc_addr; + u16 rbsize; +}; + +struct otx2_cq_queue { + u8 cq_idx; + u8 cq_type; + u8 cint_idx; /* CQ interrupt id */ + u8 refill_task_sched; + u16 cqe_size; + u16 pool_ptrs; + u32 cqe_cnt; + u32 cq_head; + u32 cq_tail; + u32 pend_cqe; + void *cqe_base; + struct qmem *cqe; + struct otx2_pool *rbpool; + struct xdp_rxq_info xdp_rxq; +} ____cacheline_aligned_in_smp; + +struct otx2_qset { + u32 rqe_cnt; + u32 sqe_cnt; /* Keep these two at top */ +#define OTX2_MAX_CQ_CNT 64 + u16 cq_cnt; + u16 xqe_size; + struct otx2_pool *pool; + struct otx2_cq_poll *napi; + struct otx2_cq_queue *cq; + struct otx2_snd_queue *sq; + struct otx2_rcv_queue *rq; +}; + +/* Translate IOVA to physical address */ +static inline u64 otx2_iova_to_phys(void *iommu_domain, dma_addr_t dma_addr) +{ + /* Translation is installed only when IOMMU is present */ + if (likely(iommu_domain)) + return iommu_iova_to_phys(iommu_domain, dma_addr); + return dma_addr; +} + +int otx2_napi_handler(struct napi_struct *napi, int budget); +bool otx2_sq_append_skb(struct net_device *netdev, struct otx2_snd_queue *sq, + struct sk_buff *skb, u16 qidx); +void cn10k_sqe_flush(void *dev, struct otx2_snd_queue *sq, + int size, int qidx); +void otx2_sqe_flush(void *dev, struct otx2_snd_queue *sq, + int size, int qidx); +void otx2_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq); +void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq); +#endif /* OTX2_TXRX_H */ -- cgit v1.2.3