From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/mellanox/mlx4/en_clock.c | 301 ++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_clock.c (limited to 'drivers/net/ethernet/mellanox/mlx4/en_clock.c') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c new file mode 100644 index 000000000..9e3b76182 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -0,0 +1,301 @@ +/* + * Copyright (c) 2012 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include +#include + +#include "mlx4_en.h" + +/* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) + */ +static u64 mlx4_en_read_clock(const struct cyclecounter *tc) +{ + struct mlx4_en_dev *mdev = + container_of(tc, struct mlx4_en_dev, cycles); + struct mlx4_dev *dev = mdev->dev; + + return mlx4_read_clock(dev) & tc->mask; +} + +u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) +{ + u64 hi, lo; + struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; + + lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); + hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; + + return hi | lo; +} + +u64 mlx4_en_get_hwtstamp(struct mlx4_en_dev *mdev, u64 timestamp) +{ + unsigned int seq; + u64 nsec; + + do { + seq = read_seqbegin(&mdev->clock_lock); + nsec = timecounter_cyc2time(&mdev->clock, timestamp); + } while (read_seqretry(&mdev->clock_lock, seq)); + + return ns_to_ktime(nsec); +} + +void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, + struct skb_shared_hwtstamps *hwts, + u64 timestamp) +{ + memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); + hwts->hwtstamp = mlx4_en_get_hwtstamp(mdev, timestamp); +} + +/** + * mlx4_en_remove_timestamp - disable PTP device + * @mdev: board private structure + * + * Stop the PTP support. + **/ +void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) +{ + if (mdev->ptp_clock) { + ptp_clock_unregister(mdev->ptp_clock); + mdev->ptp_clock = NULL; + mlx4_info(mdev, "removed PHC\n"); + } +} + +#define MLX4_EN_WRAP_AROUND_SEC 10UL +/* By scheduling the overflow check every 5 seconds, we have a reasonably + * good chance we wont miss a wrap around. + * TOTO: Use a timer instead of a work queue to increase the guarantee. + */ +#define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) + +void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) +{ + bool timeout = time_is_before_jiffies(mdev->last_overflow_check + + MLX4_EN_OVERFLOW_PERIOD); + unsigned long flags; + + if (timeout) { + write_seqlock_irqsave(&mdev->clock_lock, flags); + timecounter_read(&mdev->clock); + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + mdev->last_overflow_check = jiffies; + } +} + +/** + * mlx4_en_phc_adjfine - adjust the frequency of the hardware clock + * @ptp: ptp clock structure + * @scaled_ppm: Desired frequency change in scaled parts per million + * + * Adjust the frequency of the PHC cycle counter by the indicated scaled_ppm + * from the base frequency. + * + * Scaled parts per million is ppm with a 16-bit binary fractional field. + **/ +static int mlx4_en_phc_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + u32 mult; + unsigned long flags; + struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, + ptp_clock_info); + + mult = (u32)adjust_by_scaled_ppm(mdev->nominal_c_mult, scaled_ppm); + + write_seqlock_irqsave(&mdev->clock_lock, flags); + timecounter_read(&mdev->clock); + mdev->cycles.mult = mult; + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + + return 0; +} + +/** + * mlx4_en_phc_adjtime - Shift the time of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired change in nanoseconds + * + * Adjust the timer by resetting the timecounter structure. + **/ +static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, + ptp_clock_info); + unsigned long flags; + + write_seqlock_irqsave(&mdev->clock_lock, flags); + timecounter_adjtime(&mdev->clock, delta); + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + + return 0; +} + +/** + * mlx4_en_phc_gettime - Reads the current time from the hardware clock + * @ptp: ptp clock structure + * @ts: timespec structure to hold the current time value + * + * Read the timecounter and return the correct value in ns after converting + * it into a struct timespec. + **/ +static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, + struct timespec64 *ts) +{ + struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, + ptp_clock_info); + unsigned long flags; + u64 ns; + + write_seqlock_irqsave(&mdev->clock_lock, flags); + ns = timecounter_read(&mdev->clock); + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +/** + * mlx4_en_phc_settime - Set the current time on the hardware clock + * @ptp: ptp clock structure + * @ts: timespec containing the new time for the cycle counter + * + * Reset the timecounter to use a new base value instead of the kernel + * wall timer value. + **/ +static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, + ptp_clock_info); + u64 ns = timespec64_to_ns(ts); + unsigned long flags; + + /* reset the timecounter */ + write_seqlock_irqsave(&mdev->clock_lock, flags); + timecounter_init(&mdev->clock, &mdev->cycles, ns); + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + + return 0; +} + +/** + * mlx4_en_phc_enable - enable or disable an ancillary feature + * @ptp: ptp clock structure + * @request: Desired resource to enable or disable + * @on: Caller passes one to enable or zero to disable + * + * Enable (or disable) ancillary features of the PHC subsystem. + * Currently, no ancillary features are supported. + **/ +static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, + struct ptp_clock_request __always_unused *request, + int __always_unused on) +{ + return -EOPNOTSUPP; +} + +static const struct ptp_clock_info mlx4_en_ptp_clock_info = { + .owner = THIS_MODULE, + .max_adj = 100000000, + .n_alarm = 0, + .n_ext_ts = 0, + .n_per_out = 0, + .n_pins = 0, + .pps = 0, + .adjfine = mlx4_en_phc_adjfine, + .adjtime = mlx4_en_phc_adjtime, + .gettime64 = mlx4_en_phc_gettime, + .settime64 = mlx4_en_phc_settime, + .enable = mlx4_en_phc_enable, +}; + + +/* This function calculates the max shift that enables the user range + * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register. + */ +static u32 freq_to_shift(u16 freq) +{ + u32 freq_khz = freq * 1000; + u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; + u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1); + /* calculate max possible multiplier in order to fit in 64bit */ + u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded); + + /* This comes from the reverse of clocksource_khz2mult */ + return ilog2(div_u64(max_mul * freq_khz, 1000000)); +} + +void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) +{ + struct mlx4_dev *dev = mdev->dev; + unsigned long flags; + + /* mlx4_en_init_timestamp is called for each netdev. + * mdev->ptp_clock is common for all ports, skip initialization if + * was done for other port. + */ + if (mdev->ptp_clock) + return; + + seqlock_init(&mdev->clock_lock); + + memset(&mdev->cycles, 0, sizeof(mdev->cycles)); + mdev->cycles.read = mlx4_en_read_clock; + mdev->cycles.mask = CLOCKSOURCE_MASK(48); + mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock); + mdev->cycles.mult = + clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); + mdev->nominal_c_mult = mdev->cycles.mult; + + write_seqlock_irqsave(&mdev->clock_lock, flags); + timecounter_init(&mdev->clock, &mdev->cycles, + ktime_to_ns(ktime_get_real())); + write_sequnlock_irqrestore(&mdev->clock_lock, flags); + + /* Configure the PHC */ + mdev->ptp_clock_info = mlx4_en_ptp_clock_info; + snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); + + mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, + &mdev->pdev->dev); + if (IS_ERR(mdev->ptp_clock)) { + mdev->ptp_clock = NULL; + mlx4_err(mdev, "ptp_clock_register failed\n"); + } else if (mdev->ptp_clock) { + mlx4_info(mdev, "registered PHC clock\n"); + } + +} -- cgit v1.2.3