From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/mellanox/mlx4/profile.c | 270 +++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 drivers/net/ethernet/mellanox/mlx4/profile.c (limited to 'drivers/net/ethernet/mellanox/mlx4/profile.c') diff --git a/drivers/net/ethernet/mellanox/mlx4/profile.c b/drivers/net/ethernet/mellanox/mlx4/profile.c new file mode 100644 index 000000000..ba361c5fb --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx4/profile.c @@ -0,0 +1,270 @@ +/* + * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include + +#include "mlx4.h" +#include "fw.h" + +enum { + MLX4_RES_QP, + MLX4_RES_RDMARC, + MLX4_RES_ALTC, + MLX4_RES_AUXC, + MLX4_RES_SRQ, + MLX4_RES_CQ, + MLX4_RES_EQ, + MLX4_RES_DMPT, + MLX4_RES_CMPT, + MLX4_RES_MTT, + MLX4_RES_MCG, + MLX4_RES_NUM +}; + +static const char *res_name[] = { + [MLX4_RES_QP] = "QP", + [MLX4_RES_RDMARC] = "RDMARC", + [MLX4_RES_ALTC] = "ALTC", + [MLX4_RES_AUXC] = "AUXC", + [MLX4_RES_SRQ] = "SRQ", + [MLX4_RES_CQ] = "CQ", + [MLX4_RES_EQ] = "EQ", + [MLX4_RES_DMPT] = "DMPT", + [MLX4_RES_CMPT] = "CMPT", + [MLX4_RES_MTT] = "MTT", + [MLX4_RES_MCG] = "MCG", +}; + +u64 mlx4_make_profile(struct mlx4_dev *dev, + struct mlx4_profile *request, + struct mlx4_dev_cap *dev_cap, + struct mlx4_init_hca_param *init_hca) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_resource { + u64 size; + u64 start; + int type; + u32 num; + int log_num; + }; + + u64 total_size = 0; + struct mlx4_resource *profile; + struct sysinfo si; + int i, j; + + profile = kcalloc(MLX4_RES_NUM, sizeof(*profile), GFP_KERNEL); + if (!profile) + return -ENOMEM; + + /* + * We want to scale the number of MTTs with the size of the + * system memory, since it makes sense to register a lot of + * memory on a system with a lot of memory. As a heuristic, + * make sure we have enough MTTs to cover twice the system + * memory (with PAGE_SIZE entries). + * + * This number has to be a power of two and fit into 32 bits + * due to device limitations, so cap this at 2^31 as well. + * That limits us to 8TB of memory registration per HCA with + * 4KB pages, which is probably OK for the next few months. + */ + si_meminfo(&si); + request->num_mtt = + roundup_pow_of_two(max_t(unsigned, request->num_mtt, + min(1UL << (31 - log_mtts_per_seg), + (si.totalram << 1) >> log_mtts_per_seg))); + + + profile[MLX4_RES_QP].size = dev_cap->qpc_entry_sz; + profile[MLX4_RES_RDMARC].size = dev_cap->rdmarc_entry_sz; + profile[MLX4_RES_ALTC].size = dev_cap->altc_entry_sz; + profile[MLX4_RES_AUXC].size = dev_cap->aux_entry_sz; + profile[MLX4_RES_SRQ].size = dev_cap->srq_entry_sz; + profile[MLX4_RES_CQ].size = dev_cap->cqc_entry_sz; + profile[MLX4_RES_EQ].size = dev_cap->eqc_entry_sz; + profile[MLX4_RES_DMPT].size = dev_cap->dmpt_entry_sz; + profile[MLX4_RES_CMPT].size = dev_cap->cmpt_entry_sz; + profile[MLX4_RES_MTT].size = dev_cap->mtt_entry_sz; + profile[MLX4_RES_MCG].size = mlx4_get_mgm_entry_size(dev); + + profile[MLX4_RES_QP].num = request->num_qp; + profile[MLX4_RES_RDMARC].num = request->num_qp * request->rdmarc_per_qp; + profile[MLX4_RES_ALTC].num = request->num_qp; + profile[MLX4_RES_AUXC].num = request->num_qp; + profile[MLX4_RES_SRQ].num = request->num_srq; + profile[MLX4_RES_CQ].num = request->num_cq; + profile[MLX4_RES_EQ].num = mlx4_is_mfunc(dev) ? dev->phys_caps.num_phys_eqs : + min_t(unsigned, dev_cap->max_eqs, MAX_MSIX); + profile[MLX4_RES_DMPT].num = request->num_mpt; + profile[MLX4_RES_CMPT].num = MLX4_NUM_CMPTS; + profile[MLX4_RES_MTT].num = request->num_mtt * (1 << log_mtts_per_seg); + profile[MLX4_RES_MCG].num = request->num_mcg; + + for (i = 0; i < MLX4_RES_NUM; ++i) { + profile[i].type = i; + profile[i].num = roundup_pow_of_two(profile[i].num); + profile[i].log_num = ilog2(profile[i].num); + profile[i].size *= profile[i].num; + profile[i].size = max(profile[i].size, (u64) PAGE_SIZE); + } + + /* + * Sort the resources in decreasing order of size. Since they + * all have sizes that are powers of 2, we'll be able to keep + * resources aligned to their size and pack them without gaps + * using the sorted order. + */ + for (i = MLX4_RES_NUM; i > 0; --i) + for (j = 1; j < i; ++j) { + if (profile[j].size > profile[j - 1].size) + swap(profile[j], profile[j - 1]); + } + + for (i = 0; i < MLX4_RES_NUM; ++i) { + if (profile[i].size) { + profile[i].start = total_size; + total_size += profile[i].size; + } + + if (total_size > dev_cap->max_icm_sz) { + mlx4_err(dev, "Profile requires 0x%llx bytes; won't fit in 0x%llx bytes of context memory\n", + (unsigned long long) total_size, + (unsigned long long) dev_cap->max_icm_sz); + kfree(profile); + return -ENOMEM; + } + + if (profile[i].size) + mlx4_dbg(dev, " profile[%2d] (%6s): 2^%02d entries @ 0x%10llx, size 0x%10llx\n", + i, res_name[profile[i].type], + profile[i].log_num, + (unsigned long long) profile[i].start, + (unsigned long long) profile[i].size); + } + + mlx4_dbg(dev, "HCA context memory: reserving %d KB\n", + (int) (total_size >> 10)); + + for (i = 0; i < MLX4_RES_NUM; ++i) { + switch (profile[i].type) { + case MLX4_RES_QP: + dev->caps.num_qps = profile[i].num; + init_hca->qpc_base = profile[i].start; + init_hca->log_num_qps = profile[i].log_num; + break; + case MLX4_RES_RDMARC: + for (priv->qp_table.rdmarc_shift = 0; + request->num_qp << priv->qp_table.rdmarc_shift < profile[i].num; + ++priv->qp_table.rdmarc_shift) + ; /* nothing */ + dev->caps.max_qp_dest_rdma = 1 << priv->qp_table.rdmarc_shift; + priv->qp_table.rdmarc_base = (u32) profile[i].start; + init_hca->rdmarc_base = profile[i].start; + init_hca->log_rd_per_qp = priv->qp_table.rdmarc_shift; + break; + case MLX4_RES_ALTC: + init_hca->altc_base = profile[i].start; + break; + case MLX4_RES_AUXC: + init_hca->auxc_base = profile[i].start; + break; + case MLX4_RES_SRQ: + dev->caps.num_srqs = profile[i].num; + init_hca->srqc_base = profile[i].start; + init_hca->log_num_srqs = profile[i].log_num; + break; + case MLX4_RES_CQ: + dev->caps.num_cqs = profile[i].num; + init_hca->cqc_base = profile[i].start; + init_hca->log_num_cqs = profile[i].log_num; + break; + case MLX4_RES_EQ: + if (dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_SYS_EQS) { + init_hca->log_num_eqs = 0x1f; + init_hca->eqc_base = profile[i].start; + init_hca->num_sys_eqs = dev_cap->num_sys_eqs; + } else { + dev->caps.num_eqs = roundup_pow_of_two( + min_t(unsigned, + dev_cap->max_eqs, + MAX_MSIX)); + init_hca->eqc_base = profile[i].start; + init_hca->log_num_eqs = ilog2(dev->caps.num_eqs); + } + break; + case MLX4_RES_DMPT: + dev->caps.num_mpts = profile[i].num; + priv->mr_table.mpt_base = profile[i].start; + init_hca->dmpt_base = profile[i].start; + init_hca->log_mpt_sz = profile[i].log_num; + break; + case MLX4_RES_CMPT: + init_hca->cmpt_base = profile[i].start; + break; + case MLX4_RES_MTT: + dev->caps.num_mtts = profile[i].num; + priv->mr_table.mtt_base = profile[i].start; + init_hca->mtt_base = profile[i].start; + break; + case MLX4_RES_MCG: + init_hca->mc_base = profile[i].start; + init_hca->log_mc_entry_sz = + ilog2(mlx4_get_mgm_entry_size(dev)); + init_hca->log_mc_table_sz = profile[i].log_num; + if (dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) { + dev->caps.num_mgms = profile[i].num; + } else { + init_hca->log_mc_hash_sz = + profile[i].log_num - 1; + dev->caps.num_mgms = profile[i].num >> 1; + dev->caps.num_amgms = profile[i].num >> 1; + } + break; + default: + break; + } + } + + /* + * PDs don't take any HCA memory, but we assign them as part + * of the HCA profile anyway. + */ + dev->caps.num_pds = MLX4_NUM_PDS; + + kfree(profile); + return total_size; +} -- cgit v1.2.3