From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/microchip/enc28j60_hw.h | 310 +++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) create mode 100644 drivers/net/ethernet/microchip/enc28j60_hw.h (limited to 'drivers/net/ethernet/microchip/enc28j60_hw.h') diff --git a/drivers/net/ethernet/microchip/enc28j60_hw.h b/drivers/net/ethernet/microchip/enc28j60_hw.h new file mode 100644 index 000000000..da4ab1725 --- /dev/null +++ b/drivers/net/ethernet/microchip/enc28j60_hw.h @@ -0,0 +1,310 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers + * + * $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $ + */ + +#ifndef _ENC28J60_HW_H +#define _ENC28J60_HW_H + +/* + * ENC28J60 Control Registers + * Control register definitions are a combination of address, + * bank number, and Ethernet/MAC/PHY indicator bits. + * - Register address (bits 0-4) + * - Bank number (bits 5-6) + * - MAC/MII indicator (bit 7) + */ +#define ADDR_MASK 0x1F +#define BANK_MASK 0x60 +#define SPRD_MASK 0x80 +/* All-bank registers */ +#define EIE 0x1B +#define EIR 0x1C +#define ESTAT 0x1D +#define ECON2 0x1E +#define ECON1 0x1F +/* Bank 0 registers */ +#define ERDPTL (0x00|0x00) +#define ERDPTH (0x01|0x00) +#define EWRPTL (0x02|0x00) +#define EWRPTH (0x03|0x00) +#define ETXSTL (0x04|0x00) +#define ETXSTH (0x05|0x00) +#define ETXNDL (0x06|0x00) +#define ETXNDH (0x07|0x00) +#define ERXSTL (0x08|0x00) +#define ERXSTH (0x09|0x00) +#define ERXNDL (0x0A|0x00) +#define ERXNDH (0x0B|0x00) +#define ERXRDPTL (0x0C|0x00) +#define ERXRDPTH (0x0D|0x00) +#define ERXWRPTL (0x0E|0x00) +#define ERXWRPTH (0x0F|0x00) +#define EDMASTL (0x10|0x00) +#define EDMASTH (0x11|0x00) +#define EDMANDL (0x12|0x00) +#define EDMANDH (0x13|0x00) +#define EDMADSTL (0x14|0x00) +#define EDMADSTH (0x15|0x00) +#define EDMACSL (0x16|0x00) +#define EDMACSH (0x17|0x00) +/* Bank 1 registers */ +#define EHT0 (0x00|0x20) +#define EHT1 (0x01|0x20) +#define EHT2 (0x02|0x20) +#define EHT3 (0x03|0x20) +#define EHT4 (0x04|0x20) +#define EHT5 (0x05|0x20) +#define EHT6 (0x06|0x20) +#define EHT7 (0x07|0x20) +#define EPMM0 (0x08|0x20) +#define EPMM1 (0x09|0x20) +#define EPMM2 (0x0A|0x20) +#define EPMM3 (0x0B|0x20) +#define EPMM4 (0x0C|0x20) +#define EPMM5 (0x0D|0x20) +#define EPMM6 (0x0E|0x20) +#define EPMM7 (0x0F|0x20) +#define EPMCSL (0x10|0x20) +#define EPMCSH (0x11|0x20) +#define EPMOL (0x14|0x20) +#define EPMOH (0x15|0x20) +#define EWOLIE (0x16|0x20) +#define EWOLIR (0x17|0x20) +#define ERXFCON (0x18|0x20) +#define EPKTCNT (0x19|0x20) +/* Bank 2 registers */ +#define MACON1 (0x00|0x40|SPRD_MASK) +/* #define MACON2 (0x01|0x40|SPRD_MASK) */ +#define MACON3 (0x02|0x40|SPRD_MASK) +#define MACON4 (0x03|0x40|SPRD_MASK) +#define MABBIPG (0x04|0x40|SPRD_MASK) +#define MAIPGL (0x06|0x40|SPRD_MASK) +#define MAIPGH (0x07|0x40|SPRD_MASK) +#define MACLCON1 (0x08|0x40|SPRD_MASK) +#define MACLCON2 (0x09|0x40|SPRD_MASK) +#define MAMXFLL (0x0A|0x40|SPRD_MASK) +#define MAMXFLH (0x0B|0x40|SPRD_MASK) +#define MAPHSUP (0x0D|0x40|SPRD_MASK) +#define MICON (0x11|0x40|SPRD_MASK) +#define MICMD (0x12|0x40|SPRD_MASK) +#define MIREGADR (0x14|0x40|SPRD_MASK) +#define MIWRL (0x16|0x40|SPRD_MASK) +#define MIWRH (0x17|0x40|SPRD_MASK) +#define MIRDL (0x18|0x40|SPRD_MASK) +#define MIRDH (0x19|0x40|SPRD_MASK) +/* Bank 3 registers */ +#define MAADR1 (0x00|0x60|SPRD_MASK) +#define MAADR0 (0x01|0x60|SPRD_MASK) +#define MAADR3 (0x02|0x60|SPRD_MASK) +#define MAADR2 (0x03|0x60|SPRD_MASK) +#define MAADR5 (0x04|0x60|SPRD_MASK) +#define MAADR4 (0x05|0x60|SPRD_MASK) +#define EBSTSD (0x06|0x60) +#define EBSTCON (0x07|0x60) +#define EBSTCSL (0x08|0x60) +#define EBSTCSH (0x09|0x60) +#define MISTAT (0x0A|0x60|SPRD_MASK) +#define EREVID (0x12|0x60) +#define ECOCON (0x15|0x60) +#define EFLOCON (0x17|0x60) +#define EPAUSL (0x18|0x60) +#define EPAUSH (0x19|0x60) +/* PHY registers */ +#define PHCON1 0x00 +#define PHSTAT1 0x01 +#define PHHID1 0x02 +#define PHHID2 0x03 +#define PHCON2 0x10 +#define PHSTAT2 0x11 +#define PHIE 0x12 +#define PHIR 0x13 +#define PHLCON 0x14 + +/* ENC28J60 EIE Register Bit Definitions */ +#define EIE_INTIE 0x80 +#define EIE_PKTIE 0x40 +#define EIE_DMAIE 0x20 +#define EIE_LINKIE 0x10 +#define EIE_TXIE 0x08 +/* #define EIE_WOLIE 0x04 (reserved) */ +#define EIE_TXERIE 0x02 +#define EIE_RXERIE 0x01 +/* ENC28J60 EIR Register Bit Definitions */ +#define EIR_PKTIF 0x40 +#define EIR_DMAIF 0x20 +#define EIR_LINKIF 0x10 +#define EIR_TXIF 0x08 +/* #define EIR_WOLIF 0x04 (reserved) */ +#define EIR_TXERIF 0x02 +#define EIR_RXERIF 0x01 +/* ENC28J60 ESTAT Register Bit Definitions */ +#define ESTAT_INT 0x80 +#define ESTAT_LATECOL 0x10 +#define ESTAT_RXBUSY 0x04 +#define ESTAT_TXABRT 0x02 +#define ESTAT_CLKRDY 0x01 +/* ENC28J60 ECON2 Register Bit Definitions */ +#define ECON2_AUTOINC 0x80 +#define ECON2_PKTDEC 0x40 +#define ECON2_PWRSV 0x20 +#define ECON2_VRPS 0x08 +/* ENC28J60 ECON1 Register Bit Definitions */ +#define ECON1_TXRST 0x80 +#define ECON1_RXRST 0x40 +#define ECON1_DMAST 0x20 +#define ECON1_CSUMEN 0x10 +#define ECON1_TXRTS 0x08 +#define ECON1_RXEN 0x04 +#define ECON1_BSEL1 0x02 +#define ECON1_BSEL0 0x01 +/* ENC28J60 MACON1 Register Bit Definitions */ +#define MACON1_LOOPBK 0x10 +#define MACON1_TXPAUS 0x08 +#define MACON1_RXPAUS 0x04 +#define MACON1_PASSALL 0x02 +#define MACON1_MARXEN 0x01 +/* ENC28J60 MACON2 Register Bit Definitions */ +#define MACON2_MARST 0x80 +#define MACON2_RNDRST 0x40 +#define MACON2_MARXRST 0x08 +#define MACON2_RFUNRST 0x04 +#define MACON2_MATXRST 0x02 +#define MACON2_TFUNRST 0x01 +/* ENC28J60 MACON3 Register Bit Definitions */ +#define MACON3_PADCFG2 0x80 +#define MACON3_PADCFG1 0x40 +#define MACON3_PADCFG0 0x20 +#define MACON3_TXCRCEN 0x10 +#define MACON3_PHDRLEN 0x08 +#define MACON3_HFRMLEN 0x04 +#define MACON3_FRMLNEN 0x02 +#define MACON3_FULDPX 0x01 +/* ENC28J60 MICMD Register Bit Definitions */ +#define MICMD_MIISCAN 0x02 +#define MICMD_MIIRD 0x01 +/* ENC28J60 MISTAT Register Bit Definitions */ +#define MISTAT_NVALID 0x04 +#define MISTAT_SCAN 0x02 +#define MISTAT_BUSY 0x01 +/* ENC28J60 ERXFCON Register Bit Definitions */ +#define ERXFCON_UCEN 0x80 +#define ERXFCON_ANDOR 0x40 +#define ERXFCON_CRCEN 0x20 +#define ERXFCON_PMEN 0x10 +#define ERXFCON_MPEN 0x08 +#define ERXFCON_HTEN 0x04 +#define ERXFCON_MCEN 0x02 +#define ERXFCON_BCEN 0x01 + +/* ENC28J60 PHY PHCON1 Register Bit Definitions */ +#define PHCON1_PRST 0x8000 +#define PHCON1_PLOOPBK 0x4000 +#define PHCON1_PPWRSV 0x0800 +#define PHCON1_PDPXMD 0x0100 +/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */ +#define PHSTAT1_PFDPX 0x1000 +#define PHSTAT1_PHDPX 0x0800 +#define PHSTAT1_LLSTAT 0x0004 +#define PHSTAT1_JBSTAT 0x0002 +/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */ +#define PHSTAT2_TXSTAT (1 << 13) +#define PHSTAT2_RXSTAT (1 << 12) +#define PHSTAT2_COLSTAT (1 << 11) +#define PHSTAT2_LSTAT (1 << 10) +#define PHSTAT2_DPXSTAT (1 << 9) +#define PHSTAT2_PLRITY (1 << 5) +/* ENC28J60 PHY PHCON2 Register Bit Definitions */ +#define PHCON2_FRCLINK 0x4000 +#define PHCON2_TXDIS 0x2000 +#define PHCON2_JABBER 0x0400 +#define PHCON2_HDLDIS 0x0100 +/* ENC28J60 PHY PHIE Register Bit Definitions */ +#define PHIE_PLNKIE (1 << 4) +#define PHIE_PGEIE (1 << 1) +/* ENC28J60 PHY PHIR Register Bit Definitions */ +#define PHIR_PLNKIF (1 << 4) +#define PHIR_PGEIF (1 << 1) + +/* ENC28J60 Packet Control Byte Bit Definitions */ +#define PKTCTRL_PHUGEEN 0x08 +#define PKTCTRL_PPADEN 0x04 +#define PKTCTRL_PCRCEN 0x02 +#define PKTCTRL_POVERRIDE 0x01 + +/* ENC28J60 Transmit Status Vector */ +#define TSV_TXBYTECNT 0 +#define TSV_TXCOLLISIONCNT 16 +#define TSV_TXCRCERROR 20 +#define TSV_TXLENCHKERROR 21 +#define TSV_TXLENOUTOFRANGE 22 +#define TSV_TXDONE 23 +#define TSV_TXMULTICAST 24 +#define TSV_TXBROADCAST 25 +#define TSV_TXPACKETDEFER 26 +#define TSV_TXEXDEFER 27 +#define TSV_TXEXCOLLISION 28 +#define TSV_TXLATECOLLISION 29 +#define TSV_TXGIANT 30 +#define TSV_TXUNDERRUN 31 +#define TSV_TOTBYTETXONWIRE 32 +#define TSV_TXCONTROLFRAME 48 +#define TSV_TXPAUSEFRAME 49 +#define TSV_BACKPRESSUREAPP 50 +#define TSV_TXVLANTAGFRAME 51 + +#define TSV_SIZE 7 +#define TSV_BYTEOF(x) ((x) / 8) +#define TSV_BITMASK(x) (1 << ((x) % 8)) +#define TSV_GETBIT(x, y) (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0) + +/* ENC28J60 Receive Status Vector */ +#define RSV_RXLONGEVDROPEV 16 +#define RSV_CARRIEREV 18 +#define RSV_CRCERROR 20 +#define RSV_LENCHECKERR 21 +#define RSV_LENOUTOFRANGE 22 +#define RSV_RXOK 23 +#define RSV_RXMULTICAST 24 +#define RSV_RXBROADCAST 25 +#define RSV_DRIBBLENIBBLE 26 +#define RSV_RXCONTROLFRAME 27 +#define RSV_RXPAUSEFRAME 28 +#define RSV_RXUNKNOWNOPCODE 29 +#define RSV_RXTYPEVLAN 30 + +#define RSV_SIZE 6 +#define RSV_BITMASK(x) (1 << ((x) - 16)) +#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0) + + +/* SPI operation codes */ +#define ENC28J60_READ_CTRL_REG 0x00 +#define ENC28J60_READ_BUF_MEM 0x3A +#define ENC28J60_WRITE_CTRL_REG 0x40 +#define ENC28J60_WRITE_BUF_MEM 0x7A +#define ENC28J60_BIT_FIELD_SET 0x80 +#define ENC28J60_BIT_FIELD_CLR 0xA0 +#define ENC28J60_SOFT_RESET 0xFF + + +/* buffer boundaries applied to internal 8K ram + * entire available packet buffer space is allocated. + * Give TX buffer space for one full ethernet frame (~1500 bytes) + * receive buffer gets the rest */ +#define TXSTART_INIT 0x1A00 +#define TXEND_INIT 0x1FFF + +/* Put RX buffer at 0 as suggested by the Errata datasheet */ +#define RXSTART_INIT 0x0000 +#define RXEND_INIT 0x19FF + +/* maximum ethernet frame length */ +#define MAX_FRAMELEN 1518 + +/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */ +#define ENC28J60_LAMPS_MODE 0x3476 + +#endif -- cgit v1.2.3