From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/ethernet/microchip/sparx5/sparx5_netdev.c | 323 +++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c (limited to 'drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c') diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c new file mode 100644 index 000000000..d07815658 --- /dev/null +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Microchip Sparx5 Switch driver + * + * Copyright (c) 2021 Microchip Technology Inc. and its subsidiaries. + */ + +#include "sparx5_main_regs.h" +#include "sparx5_main.h" +#include "sparx5_port.h" +#include "sparx5_tc.h" + +/* The IFH bit position of the first VSTAX bit. This is because the + * VSTAX bit positions in Data sheet is starting from zero. + */ +#define VSTAX 73 + +#define ifh_encode_bitfield(ifh, value, pos, _width) \ + ({ \ + u32 width = (_width); \ + \ + /* Max width is 5 bytes - 40 bits. In worst case this will + * spread over 6 bytes - 48 bits + */ \ + compiletime_assert(width <= 40, \ + "Unsupported width, must be <= 40"); \ + __ifh_encode_bitfield((ifh), (value), (pos), width); \ + }) + +static void __ifh_encode_bitfield(void *ifh, u64 value, u32 pos, u32 width) +{ + u8 *ifh_hdr = ifh; + /* Calculate the Start IFH byte position of this IFH bit position */ + u32 byte = (35 - (pos / 8)); + /* Calculate the Start bit position in the Start IFH byte */ + u32 bit = (pos % 8); + u64 encode = GENMASK_ULL(bit + width - 1, bit) & (value << bit); + + /* The b0-b7 goes into the start IFH byte */ + if (encode & 0xFF) + ifh_hdr[byte] |= (u8)((encode & 0xFF)); + /* The b8-b15 goes into the next IFH byte */ + if (encode & 0xFF00) + ifh_hdr[byte - 1] |= (u8)((encode & 0xFF00) >> 8); + /* The b16-b23 goes into the next IFH byte */ + if (encode & 0xFF0000) + ifh_hdr[byte - 2] |= (u8)((encode & 0xFF0000) >> 16); + /* The b24-b31 goes into the next IFH byte */ + if (encode & 0xFF000000) + ifh_hdr[byte - 3] |= (u8)((encode & 0xFF000000) >> 24); + /* The b32-b39 goes into the next IFH byte */ + if (encode & 0xFF00000000) + ifh_hdr[byte - 4] |= (u8)((encode & 0xFF00000000) >> 32); + /* The b40-b47 goes into the next IFH byte */ + if (encode & 0xFF0000000000) + ifh_hdr[byte - 5] |= (u8)((encode & 0xFF0000000000) >> 40); +} + +void sparx5_set_port_ifh(void *ifh_hdr, u16 portno) +{ + /* VSTAX.RSV = 1. MSBit must be 1 */ + ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 79, 1); + /* VSTAX.INGR_DROP_MODE = Enable. Don't make head-of-line blocking */ + ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 55, 1); + /* MISC.CPU_MASK/DPORT = Destination port */ + ifh_encode_bitfield(ifh_hdr, portno, 29, 8); + /* MISC.PIPELINE_PT */ + ifh_encode_bitfield(ifh_hdr, 16, 37, 5); + /* MISC.PIPELINE_ACT */ + ifh_encode_bitfield(ifh_hdr, 1, 42, 3); + /* FWD.SRC_PORT = CPU */ + ifh_encode_bitfield(ifh_hdr, SPX5_PORT_CPU, 46, 7); + /* FWD.SFLOW_ID (disable SFlow sampling) */ + ifh_encode_bitfield(ifh_hdr, 124, 57, 7); + /* FWD.UPDATE_FCS = Enable. Enforce update of FCS. */ + ifh_encode_bitfield(ifh_hdr, 1, 67, 1); +} + +void sparx5_set_port_ifh_rew_op(void *ifh_hdr, u32 rew_op) +{ + ifh_encode_bitfield(ifh_hdr, rew_op, VSTAX + 32, 10); +} + +void sparx5_set_port_ifh_pdu_type(void *ifh_hdr, u32 pdu_type) +{ + ifh_encode_bitfield(ifh_hdr, pdu_type, 191, 4); +} + +void sparx5_set_port_ifh_pdu_w16_offset(void *ifh_hdr, u32 pdu_w16_offset) +{ + ifh_encode_bitfield(ifh_hdr, pdu_w16_offset, 195, 6); +} + +void sparx5_set_port_ifh_timestamp(void *ifh_hdr, u64 timestamp) +{ + ifh_encode_bitfield(ifh_hdr, timestamp, 232, 40); +} + +static int sparx5_port_open(struct net_device *ndev) +{ + struct sparx5_port *port = netdev_priv(ndev); + int err = 0; + + sparx5_port_enable(port, true); + err = phylink_of_phy_connect(port->phylink, port->of_node, 0); + if (err) { + netdev_err(ndev, "Could not attach to PHY\n"); + goto err_connect; + } + + phylink_start(port->phylink); + + if (!ndev->phydev) { + /* power up serdes */ + port->conf.power_down = false; + if (port->conf.serdes_reset) + err = sparx5_serdes_set(port->sparx5, port, &port->conf); + else + err = phy_power_on(port->serdes); + if (err) { + netdev_err(ndev, "%s failed\n", __func__); + goto out_power; + } + } + + return 0; + +out_power: + phylink_stop(port->phylink); + phylink_disconnect_phy(port->phylink); +err_connect: + sparx5_port_enable(port, false); + + return err; +} + +static int sparx5_port_stop(struct net_device *ndev) +{ + struct sparx5_port *port = netdev_priv(ndev); + int err = 0; + + sparx5_port_enable(port, false); + phylink_stop(port->phylink); + phylink_disconnect_phy(port->phylink); + + if (!ndev->phydev) { + /* power down serdes */ + port->conf.power_down = true; + if (port->conf.serdes_reset) + err = sparx5_serdes_set(port->sparx5, port, &port->conf); + else + err = phy_power_off(port->serdes); + if (err) + netdev_err(ndev, "%s failed\n", __func__); + } + return 0; +} + +static void sparx5_set_rx_mode(struct net_device *dev) +{ + struct sparx5_port *port = netdev_priv(dev); + struct sparx5 *sparx5 = port->sparx5; + + if (!test_bit(port->portno, sparx5->bridge_mask)) + __dev_mc_sync(dev, sparx5_mc_sync, sparx5_mc_unsync); +} + +static int sparx5_port_get_phys_port_name(struct net_device *dev, + char *buf, size_t len) +{ + struct sparx5_port *port = netdev_priv(dev); + int ret; + + ret = snprintf(buf, len, "p%d", port->portno); + if (ret >= len) + return -EINVAL; + + return 0; +} + +static int sparx5_set_mac_address(struct net_device *dev, void *p) +{ + struct sparx5_port *port = netdev_priv(dev); + struct sparx5 *sparx5 = port->sparx5; + const struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + /* Remove current */ + sparx5_mact_forget(sparx5, dev->dev_addr, port->pvid); + + /* Add new */ + sparx5_mact_learn(sparx5, PGID_CPU, addr->sa_data, port->pvid); + + /* Record the address */ + eth_hw_addr_set(dev, addr->sa_data); + + return 0; +} + +static int sparx5_get_port_parent_id(struct net_device *dev, + struct netdev_phys_item_id *ppid) +{ + struct sparx5_port *sparx5_port = netdev_priv(dev); + struct sparx5 *sparx5 = sparx5_port->sparx5; + + ppid->id_len = sizeof(sparx5->base_mac); + memcpy(&ppid->id, &sparx5->base_mac, ppid->id_len); + + return 0; +} + +static int sparx5_port_ioctl(struct net_device *dev, struct ifreq *ifr, + int cmd) +{ + struct sparx5_port *sparx5_port = netdev_priv(dev); + struct sparx5 *sparx5 = sparx5_port->sparx5; + + if (!phy_has_hwtstamp(dev->phydev) && sparx5->ptp) { + switch (cmd) { + case SIOCSHWTSTAMP: + return sparx5_ptp_hwtstamp_set(sparx5_port, ifr); + case SIOCGHWTSTAMP: + return sparx5_ptp_hwtstamp_get(sparx5_port, ifr); + } + } + + return phy_mii_ioctl(dev->phydev, ifr, cmd); +} + +static const struct net_device_ops sparx5_port_netdev_ops = { + .ndo_open = sparx5_port_open, + .ndo_stop = sparx5_port_stop, + .ndo_start_xmit = sparx5_port_xmit_impl, + .ndo_set_rx_mode = sparx5_set_rx_mode, + .ndo_get_phys_port_name = sparx5_port_get_phys_port_name, + .ndo_set_mac_address = sparx5_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_get_stats64 = sparx5_get_stats64, + .ndo_get_port_parent_id = sparx5_get_port_parent_id, + .ndo_eth_ioctl = sparx5_port_ioctl, + .ndo_setup_tc = sparx5_port_setup_tc, +}; + +bool sparx5_netdevice_check(const struct net_device *dev) +{ + return dev && (dev->netdev_ops == &sparx5_port_netdev_ops); +} + +struct net_device *sparx5_create_netdev(struct sparx5 *sparx5, u32 portno) +{ + struct sparx5_port *spx5_port; + struct net_device *ndev; + + ndev = devm_alloc_etherdev_mqs(sparx5->dev, sizeof(struct sparx5_port), + SPX5_PRIOS, 1); + if (!ndev) + return ERR_PTR(-ENOMEM); + + ndev->hw_features |= NETIF_F_HW_TC; + ndev->features |= NETIF_F_HW_TC; + + SET_NETDEV_DEV(ndev, sparx5->dev); + spx5_port = netdev_priv(ndev); + spx5_port->ndev = ndev; + spx5_port->sparx5 = sparx5; + spx5_port->portno = portno; + + ndev->netdev_ops = &sparx5_port_netdev_ops; + ndev->ethtool_ops = &sparx5_ethtool_ops; + + eth_hw_addr_gen(ndev, sparx5->base_mac, portno + 1); + + return ndev; +} + +int sparx5_register_netdevs(struct sparx5 *sparx5) +{ + int portno; + int err; + + for (portno = 0; portno < SPX5_PORTS; portno++) + if (sparx5->ports[portno]) { + err = register_netdev(sparx5->ports[portno]->ndev); + if (err) { + dev_err(sparx5->dev, + "port: %02u: netdev registration failed\n", + portno); + return err; + } + sparx5_port_inj_timer_setup(sparx5->ports[portno]); + } + return 0; +} + +void sparx5_destroy_netdevs(struct sparx5 *sparx5) +{ + struct sparx5_port *port; + int portno; + + for (portno = 0; portno < SPX5_PORTS; portno++) { + port = sparx5->ports[portno]; + if (port && port->phylink) { + /* Disconnect the phy */ + rtnl_lock(); + sparx5_port_stop(port->ndev); + phylink_disconnect_phy(port->phylink); + rtnl_unlock(); + phylink_destroy(port->phylink); + port->phylink = NULL; + } + } +} + +void sparx5_unregister_netdevs(struct sparx5 *sparx5) +{ + int portno; + + for (portno = 0; portno < SPX5_PORTS; portno++) + if (sparx5->ports[portno]) + unregister_netdev(sparx5->ports[portno]->ndev); +} + -- cgit v1.2.3