From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h | 269 +++++++++++++++++++++ 1 file changed, 269 insertions(+) create mode 100644 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h (limited to 'drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h') diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h new file mode 100644 index 000000000..de73766e1 --- /dev/null +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h @@ -0,0 +1,269 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2003 - 2009 NetXen, Inc. + * Copyright (C) 2009 - QLogic Corporation. + * All rights reserved. + */ + +#ifndef __NETXEN_NIC_HW_H_ +#define __NETXEN_NIC_HW_H_ + +/* Hardware memory size of 128 meg */ +#define NETXEN_MEMADDR_MAX (128 * 1024 * 1024) + +struct netxen_adapter; + +#define NETXEN_PCI_MAPSIZE_BYTES (NETXEN_PCI_MAPSIZE << 20) + +void netxen_nic_set_link_parameters(struct netxen_adapter *adapter); + +/* Nibble or Byte mode for phy interface (GbE mode only) */ + +#define _netxen_crb_get_bit(var, bit) ((var >> bit) & 0x1) + +/* + * NIU GB MAC Config Register 0 (applies to GB0, GB1, GB2, GB3) + * + * Bit 0 : enable_tx => 1:enable frame xmit, 0:disable + * Bit 1 : tx_synced => R/O: xmit enable synched to xmit stream + * Bit 2 : enable_rx => 1:enable frame recv, 0:disable + * Bit 3 : rx_synced => R/O: recv enable synched to recv stream + * Bit 4 : tx_flowctl => 1:enable pause frame generation, 0:disable + * Bit 5 : rx_flowctl => 1:act on recv'd pause frames, 0:ignore + * Bit 8 : loopback => 1:loop MAC xmits to MAC recvs, 0:normal + * Bit 16: tx_reset_pb => 1:reset frame xmit protocol blk, 0:no-op + * Bit 17: rx_reset_pb => 1:reset frame recv protocol blk, 0:no-op + * Bit 18: tx_reset_mac => 1:reset data/ctl multiplexer blk, 0:no-op + * Bit 19: rx_reset_mac => 1:reset ctl frames & timers blk, 0:no-op + * Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op + */ + +#define netxen_gb_tx_flowctl(config_word) \ + ((config_word) |= 1 << 4) +#define netxen_gb_rx_flowctl(config_word) \ + ((config_word) |= 1 << 5) +#define netxen_gb_tx_reset_pb(config_word) \ + ((config_word) |= 1 << 16) +#define netxen_gb_rx_reset_pb(config_word) \ + ((config_word) |= 1 << 17) +#define netxen_gb_tx_reset_mac(config_word) \ + ((config_word) |= 1 << 18) +#define netxen_gb_rx_reset_mac(config_word) \ + ((config_word) |= 1 << 19) + +#define netxen_gb_unset_tx_flowctl(config_word) \ + ((config_word) &= ~(1 << 4)) +#define netxen_gb_unset_rx_flowctl(config_word) \ + ((config_word) &= ~(1 << 5)) + +#define netxen_gb_get_tx_synced(config_word) \ + _netxen_crb_get_bit((config_word), 1) +#define netxen_gb_get_rx_synced(config_word) \ + _netxen_crb_get_bit((config_word), 3) +#define netxen_gb_get_tx_flowctl(config_word) \ + _netxen_crb_get_bit((config_word), 4) +#define netxen_gb_get_rx_flowctl(config_word) \ + _netxen_crb_get_bit((config_word), 5) +#define netxen_gb_get_soft_reset(config_word) \ + _netxen_crb_get_bit((config_word), 31) + +#define netxen_gb_get_stationaddress_low(config_word) ((config_word) >> 16) + +#define netxen_gb_set_mii_mgmt_clockselect(config_word, val) \ + ((config_word) |= ((val) & 0x07)) +#define netxen_gb_mii_mgmt_reset(config_word) \ + ((config_word) |= 1 << 31) +#define netxen_gb_mii_mgmt_unset(config_word) \ + ((config_word) &= ~(1 << 31)) + +/* + * NIU GB MII Mgmt Command Register (applies to GB0, GB1, GB2, GB3) + * Bit 0 : read_cycle => 1:perform single read cycle, 0:no-op + * Bit 1 : scan_cycle => 1:perform continuous read cycles, 0:no-op + */ + +#define netxen_gb_mii_mgmt_set_read_cycle(config_word) \ + ((config_word) |= 1 << 0) +#define netxen_gb_mii_mgmt_reg_addr(config_word, val) \ + ((config_word) |= ((val) & 0x1F)) +#define netxen_gb_mii_mgmt_phy_addr(config_word, val) \ + ((config_word) |= (((val) & 0x1F) << 8)) + +/* + * NIU GB MII Mgmt Indicators Register (applies to GB0, GB1, GB2, GB3) + * Read-only register. + * Bit 0 : busy => 1:performing an MII mgmt cycle, 0:idle + * Bit 1 : scanning => 1:scan operation in progress, 0:idle + * Bit 2 : notvalid => :mgmt result data not yet valid, 0:idle + */ +#define netxen_get_gb_mii_mgmt_busy(config_word) \ + _netxen_crb_get_bit(config_word, 0) +#define netxen_get_gb_mii_mgmt_scanning(config_word) \ + _netxen_crb_get_bit(config_word, 1) +#define netxen_get_gb_mii_mgmt_notvalid(config_word) \ + _netxen_crb_get_bit(config_word, 2) +/* + * NIU XG Pause Ctl Register + * + * Bit 0 : xg0_mask => 1:disable tx pause frames + * Bit 1 : xg0_request => 1:request single pause frame + * Bit 2 : xg0_on_off => 1:request is pause on, 0:off + * Bit 3 : xg1_mask => 1:disable tx pause frames + * Bit 4 : xg1_request => 1:request single pause frame + * Bit 5 : xg1_on_off => 1:request is pause on, 0:off + */ + +#define netxen_xg_set_xg0_mask(config_word) \ + ((config_word) |= 1 << 0) +#define netxen_xg_set_xg1_mask(config_word) \ + ((config_word) |= 1 << 3) + +#define netxen_xg_get_xg0_mask(config_word) \ + _netxen_crb_get_bit((config_word), 0) +#define netxen_xg_get_xg1_mask(config_word) \ + _netxen_crb_get_bit((config_word), 3) + +#define netxen_xg_unset_xg0_mask(config_word) \ + ((config_word) &= ~(1 << 0)) +#define netxen_xg_unset_xg1_mask(config_word) \ + ((config_word) &= ~(1 << 3)) + +/* + * NIU XG Pause Ctl Register + * + * Bit 0 : xg0_mask => 1:disable tx pause frames + * Bit 1 : xg0_request => 1:request single pause frame + * Bit 2 : xg0_on_off => 1:request is pause on, 0:off + * Bit 3 : xg1_mask => 1:disable tx pause frames + * Bit 4 : xg1_request => 1:request single pause frame + * Bit 5 : xg1_on_off => 1:request is pause on, 0:off + */ +#define netxen_gb_set_gb0_mask(config_word) \ + ((config_word) |= 1 << 0) +#define netxen_gb_set_gb1_mask(config_word) \ + ((config_word) |= 1 << 2) +#define netxen_gb_set_gb2_mask(config_word) \ + ((config_word) |= 1 << 4) +#define netxen_gb_set_gb3_mask(config_word) \ + ((config_word) |= 1 << 6) + +#define netxen_gb_get_gb0_mask(config_word) \ + _netxen_crb_get_bit((config_word), 0) +#define netxen_gb_get_gb1_mask(config_word) \ + _netxen_crb_get_bit((config_word), 2) +#define netxen_gb_get_gb2_mask(config_word) \ + _netxen_crb_get_bit((config_word), 4) +#define netxen_gb_get_gb3_mask(config_word) \ + _netxen_crb_get_bit((config_word), 6) + +#define netxen_gb_unset_gb0_mask(config_word) \ + ((config_word) &= ~(1 << 0)) +#define netxen_gb_unset_gb1_mask(config_word) \ + ((config_word) &= ~(1 << 2)) +#define netxen_gb_unset_gb2_mask(config_word) \ + ((config_word) &= ~(1 << 4)) +#define netxen_gb_unset_gb3_mask(config_word) \ + ((config_word) &= ~(1 << 6)) + + +/* + * PHY-Specific MII control/status registers. + */ +#define NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL 0 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS 1 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0 2 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1 3 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG 4 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART 5 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE 6 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT 7 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE 8 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL 9 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS 10 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS 15 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL 16 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS 17 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE 18 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS 19 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE 20 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT 21 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL 24 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE 25 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET 26 +#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE 27 + +/* + * PHY-Specific Status Register (reg 17). + * + * Bit 0 : jabber => 1:jabber detected, 0:not + * Bit 1 : polarity => 1:polarity reversed, 0:normal + * Bit 2 : recvpause => 1:receive pause enabled, 0:disabled + * Bit 3 : xmitpause => 1:transmit pause enabled, 0:disabled + * Bit 4 : energydetect => 1:sleep, 0:active + * Bit 5 : downshift => 1:downshift, 0:no downshift + * Bit 6 : crossover => 1:MDIX (crossover), 0:MDI (no crossover) + * Bits 7-9 : cablelen => not valid in 10Mb/s mode + * 0:<50m, 1:50-80m, 2:80-110m, 3:110-140m, 4:>140m + * Bit 10 : link => 1:link up, 0:link down + * Bit 11 : resolved => 1:speed and duplex resolved, 0:not yet + * Bit 12 : pagercvd => 1:page received, 0:page not received + * Bit 13 : duplex => 1:full duplex, 0:half duplex + * Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd + */ + +#define netxen_get_phy_speed(config_word) (((config_word) >> 14) & 0x03) + +#define netxen_set_phy_speed(config_word, val) \ + ((config_word) |= ((val & 0x03) << 14)) +#define netxen_set_phy_duplex(config_word) \ + ((config_word) |= 1 << 13) +#define netxen_clear_phy_duplex(config_word) \ + ((config_word) &= ~(1 << 13)) + +#define netxen_get_phy_link(config_word) \ + _netxen_crb_get_bit(config_word, 10) +#define netxen_get_phy_duplex(config_word) \ + _netxen_crb_get_bit(config_word, 13) + +/* + * NIU Mode Register. + * Bit 0 : enable FibreChannel + * Bit 1 : enable 10/100/1000 Ethernet + * Bit 2 : enable 10Gb Ethernet + */ + +#define netxen_get_niu_enable_ge(config_word) \ + _netxen_crb_get_bit(config_word, 1) + +#define NETXEN_NIU_NON_PROMISC_MODE 0 +#define NETXEN_NIU_PROMISC_MODE 1 +#define NETXEN_NIU_ALLMULTI_MODE 2 + +/* + * NIU XG MAC Config Register + * + * Bit 0 : tx_enable => 1:enable frame xmit, 0:disable + * Bit 2 : rx_enable => 1:enable frame recv, 0:disable + * Bit 4 : soft_reset => 1:reset the MAC , 0:no-op + * Bit 27: xaui_framer_reset + * Bit 28: xaui_rx_reset + * Bit 29: xaui_tx_reset + * Bit 30: xg_ingress_afifo_reset + * Bit 31: xg_egress_afifo_reset + */ + +#define netxen_xg_soft_reset(config_word) \ + ((config_word) |= 1 << 4) + +typedef struct { + unsigned valid; + unsigned start_128M; + unsigned end_128M; + unsigned start_2M; +} crb_128M_2M_sub_block_map_t; + +typedef struct { + crb_128M_2M_sub_block_map_t sub_block[16]; +} crb_128M_2M_block_map_t; + +#endif /* __NETXEN_NIC_HW_H_ */ -- cgit v1.2.3