From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/qualcomm/qca_uart.c | 417 +++++++++++++++++++++++++++++++ 1 file changed, 417 insertions(+) create mode 100644 drivers/net/ethernet/qualcomm/qca_uart.c (limited to 'drivers/net/ethernet/qualcomm/qca_uart.c') diff --git a/drivers/net/ethernet/qualcomm/qca_uart.c b/drivers/net/ethernet/qualcomm/qca_uart.c new file mode 100644 index 000000000..26646cb6a --- /dev/null +++ b/drivers/net/ethernet/qualcomm/qca_uart.c @@ -0,0 +1,417 @@ +/* + * Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc. + * Copyright (c) 2017, I2SE GmbH + * + * Permission to use, copy, modify, and/or distribute this software + * for any purpose with or without fee is hereby granted, provided + * that the above copyright notice and this permission notice appear + * in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL + * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL + * THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, + * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* This module implements the Qualcomm Atheros UART protocol for + * kernel-based UART device; it is essentially an Ethernet-to-UART + * serial converter; + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qca_7k_common.h" + +#define QCAUART_DRV_VERSION "0.1.0" +#define QCAUART_DRV_NAME "qcauart" +#define QCAUART_TX_TIMEOUT (1 * HZ) + +struct qcauart { + struct net_device *net_dev; + spinlock_t lock; /* transmit lock */ + struct work_struct tx_work; /* Flushes transmit buffer */ + + struct serdev_device *serdev; + struct qcafrm_handle frm_handle; + struct sk_buff *rx_skb; + + unsigned char *tx_head; /* pointer to next XMIT byte */ + int tx_left; /* bytes left in XMIT queue */ + unsigned char *tx_buffer; +}; + +static int +qca_tty_receive(struct serdev_device *serdev, const unsigned char *data, + size_t count) +{ + struct qcauart *qca = serdev_device_get_drvdata(serdev); + struct net_device *netdev = qca->net_dev; + struct net_device_stats *n_stats = &netdev->stats; + size_t i; + + if (!qca->rx_skb) { + qca->rx_skb = netdev_alloc_skb_ip_align(netdev, + netdev->mtu + + VLAN_ETH_HLEN); + if (!qca->rx_skb) { + n_stats->rx_errors++; + n_stats->rx_dropped++; + return 0; + } + } + + for (i = 0; i < count; i++) { + s32 retcode; + + retcode = qcafrm_fsm_decode(&qca->frm_handle, + qca->rx_skb->data, + skb_tailroom(qca->rx_skb), + data[i]); + + switch (retcode) { + case QCAFRM_GATHER: + case QCAFRM_NOHEAD: + break; + case QCAFRM_NOTAIL: + netdev_dbg(netdev, "recv: no RX tail\n"); + n_stats->rx_errors++; + n_stats->rx_dropped++; + break; + case QCAFRM_INVLEN: + netdev_dbg(netdev, "recv: invalid RX length\n"); + n_stats->rx_errors++; + n_stats->rx_dropped++; + break; + default: + n_stats->rx_packets++; + n_stats->rx_bytes += retcode; + skb_put(qca->rx_skb, retcode); + qca->rx_skb->protocol = eth_type_trans( + qca->rx_skb, qca->rx_skb->dev); + skb_checksum_none_assert(qca->rx_skb); + netif_rx(qca->rx_skb); + qca->rx_skb = netdev_alloc_skb_ip_align(netdev, + netdev->mtu + + VLAN_ETH_HLEN); + if (!qca->rx_skb) { + netdev_dbg(netdev, "recv: out of RX resources\n"); + n_stats->rx_errors++; + return i; + } + } + } + + return i; +} + +/* Write out any remaining transmit buffer. Scheduled when tty is writable */ +static void qcauart_transmit(struct work_struct *work) +{ + struct qcauart *qca = container_of(work, struct qcauart, tx_work); + struct net_device_stats *n_stats = &qca->net_dev->stats; + int written; + + spin_lock_bh(&qca->lock); + + /* First make sure we're connected. */ + if (!netif_running(qca->net_dev)) { + spin_unlock_bh(&qca->lock); + return; + } + + if (qca->tx_left <= 0) { + /* Now serial buffer is almost free & we can start + * transmission of another packet + */ + n_stats->tx_packets++; + spin_unlock_bh(&qca->lock); + netif_wake_queue(qca->net_dev); + return; + } + + written = serdev_device_write_buf(qca->serdev, qca->tx_head, + qca->tx_left); + if (written > 0) { + qca->tx_left -= written; + qca->tx_head += written; + } + spin_unlock_bh(&qca->lock); +} + +/* Called by the driver when there's room for more data. + * Schedule the transmit. + */ +static void qca_tty_wakeup(struct serdev_device *serdev) +{ + struct qcauart *qca = serdev_device_get_drvdata(serdev); + + schedule_work(&qca->tx_work); +} + +static const struct serdev_device_ops qca_serdev_ops = { + .receive_buf = qca_tty_receive, + .write_wakeup = qca_tty_wakeup, +}; + +static int qcauart_netdev_open(struct net_device *dev) +{ + struct qcauart *qca = netdev_priv(dev); + + netif_start_queue(qca->net_dev); + + return 0; +} + +static int qcauart_netdev_close(struct net_device *dev) +{ + struct qcauart *qca = netdev_priv(dev); + + netif_stop_queue(dev); + flush_work(&qca->tx_work); + + spin_lock_bh(&qca->lock); + qca->tx_left = 0; + spin_unlock_bh(&qca->lock); + + return 0; +} + +static netdev_tx_t +qcauart_netdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct net_device_stats *n_stats = &dev->stats; + struct qcauart *qca = netdev_priv(dev); + u8 pad_len = 0; + int written; + u8 *pos; + + spin_lock(&qca->lock); + + WARN_ON(qca->tx_left); + + if (!netif_running(dev)) { + spin_unlock(&qca->lock); + netdev_warn(qca->net_dev, "xmit: iface is down\n"); + goto out; + } + + pos = qca->tx_buffer; + + if (skb->len < QCAFRM_MIN_LEN) + pad_len = QCAFRM_MIN_LEN - skb->len; + + pos += qcafrm_create_header(pos, skb->len + pad_len); + + memcpy(pos, skb->data, skb->len); + pos += skb->len; + + if (pad_len) { + memset(pos, 0, pad_len); + pos += pad_len; + } + + pos += qcafrm_create_footer(pos); + + netif_stop_queue(qca->net_dev); + + written = serdev_device_write_buf(qca->serdev, qca->tx_buffer, + pos - qca->tx_buffer); + if (written > 0) { + qca->tx_left = (pos - qca->tx_buffer) - written; + qca->tx_head = qca->tx_buffer + written; + n_stats->tx_bytes += written; + } + spin_unlock(&qca->lock); + + netif_trans_update(dev); +out: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static void qcauart_netdev_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct qcauart *qca = netdev_priv(dev); + + netdev_info(qca->net_dev, "Transmit timeout at %ld, latency %ld\n", + jiffies, dev_trans_start(dev)); + dev->stats.tx_errors++; + dev->stats.tx_dropped++; +} + +static int qcauart_netdev_init(struct net_device *dev) +{ + struct qcauart *qca = netdev_priv(dev); + size_t len; + + /* Finish setting up the device info. */ + dev->mtu = QCAFRM_MAX_MTU; + dev->type = ARPHRD_ETHER; + + len = QCAFRM_HEADER_LEN + QCAFRM_MAX_LEN + QCAFRM_FOOTER_LEN; + qca->tx_buffer = devm_kmalloc(&qca->serdev->dev, len, GFP_KERNEL); + if (!qca->tx_buffer) + return -ENOMEM; + + qca->rx_skb = netdev_alloc_skb_ip_align(qca->net_dev, + qca->net_dev->mtu + + VLAN_ETH_HLEN); + if (!qca->rx_skb) + return -ENOBUFS; + + return 0; +} + +static void qcauart_netdev_uninit(struct net_device *dev) +{ + struct qcauart *qca = netdev_priv(dev); + + dev_kfree_skb(qca->rx_skb); +} + +static const struct net_device_ops qcauart_netdev_ops = { + .ndo_init = qcauart_netdev_init, + .ndo_uninit = qcauart_netdev_uninit, + .ndo_open = qcauart_netdev_open, + .ndo_stop = qcauart_netdev_close, + .ndo_start_xmit = qcauart_netdev_xmit, + .ndo_set_mac_address = eth_mac_addr, + .ndo_tx_timeout = qcauart_netdev_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; + +static void qcauart_netdev_setup(struct net_device *dev) +{ + dev->netdev_ops = &qcauart_netdev_ops; + dev->watchdog_timeo = QCAUART_TX_TIMEOUT; + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->tx_queue_len = 100; + + /* MTU range: 46 - 1500 */ + dev->min_mtu = QCAFRM_MIN_MTU; + dev->max_mtu = QCAFRM_MAX_MTU; +} + +static const struct of_device_id qca_uart_of_match[] = { + { + .compatible = "qca,qca7000", + }, + {} +}; +MODULE_DEVICE_TABLE(of, qca_uart_of_match); + +static int qca_uart_probe(struct serdev_device *serdev) +{ + struct net_device *qcauart_dev = alloc_etherdev(sizeof(struct qcauart)); + struct qcauart *qca; + u32 speed = 115200; + int ret; + + if (!qcauart_dev) + return -ENOMEM; + + qcauart_netdev_setup(qcauart_dev); + SET_NETDEV_DEV(qcauart_dev, &serdev->dev); + + qca = netdev_priv(qcauart_dev); + if (!qca) { + pr_err("qca_uart: Fail to retrieve private structure\n"); + ret = -ENOMEM; + goto free; + } + qca->net_dev = qcauart_dev; + qca->serdev = serdev; + qcafrm_fsm_init_uart(&qca->frm_handle); + + spin_lock_init(&qca->lock); + INIT_WORK(&qca->tx_work, qcauart_transmit); + + of_property_read_u32(serdev->dev.of_node, "current-speed", &speed); + + ret = of_get_ethdev_address(serdev->dev.of_node, qca->net_dev); + if (ret) { + eth_hw_addr_random(qca->net_dev); + dev_info(&serdev->dev, "Using random MAC address: %pM\n", + qca->net_dev->dev_addr); + } + + netif_carrier_on(qca->net_dev); + serdev_device_set_drvdata(serdev, qca); + serdev_device_set_client_ops(serdev, &qca_serdev_ops); + + ret = serdev_device_open(serdev); + if (ret) { + dev_err(&serdev->dev, "Unable to open device %s\n", + qcauart_dev->name); + goto free; + } + + speed = serdev_device_set_baudrate(serdev, speed); + dev_info(&serdev->dev, "Using baudrate: %u\n", speed); + + serdev_device_set_flow_control(serdev, false); + + ret = register_netdev(qcauart_dev); + if (ret) { + dev_err(&serdev->dev, "Unable to register net device %s\n", + qcauart_dev->name); + serdev_device_close(serdev); + cancel_work_sync(&qca->tx_work); + goto free; + } + + return 0; + +free: + free_netdev(qcauart_dev); + return ret; +} + +static void qca_uart_remove(struct serdev_device *serdev) +{ + struct qcauart *qca = serdev_device_get_drvdata(serdev); + + unregister_netdev(qca->net_dev); + + /* Flush any pending characters in the driver. */ + serdev_device_close(serdev); + cancel_work_sync(&qca->tx_work); + + free_netdev(qca->net_dev); +} + +static struct serdev_device_driver qca_uart_driver = { + .probe = qca_uart_probe, + .remove = qca_uart_remove, + .driver = { + .name = QCAUART_DRV_NAME, + .of_match_table = of_match_ptr(qca_uart_of_match), + }, +}; + +module_serdev_device_driver(qca_uart_driver); + +MODULE_DESCRIPTION("Qualcomm Atheros QCA7000 UART Driver"); +MODULE_AUTHOR("Qualcomm Atheros Communications"); +MODULE_AUTHOR("Stefan Wahren "); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(QCAUART_DRV_VERSION); -- cgit v1.2.3