From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 282 ++++++++++++++++++++++++ 1 file changed, 282 insertions(+) create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c (limited to 'drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c new file mode 100644 index 000000000..7d9f257de --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include + +#include "sxgbe_common.h" +#include "sxgbe_reg.h" + +/* MAC core initialization */ +static void sxgbe_core_init(void __iomem *ioaddr) +{ + u32 regval; + + /* TX configuration */ + regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + /* Other configurable parameters IFP, IPG, ISR, ISM + * needs to be set if needed + */ + regval |= SXGBE_TX_JABBER_DISABLE; + writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG); + + /* RX configuration */ + regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + /* Other configurable parameters CST, SPEN, USP, GPSLCE + * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be + * set if needed + */ + regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE; + writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +/* Dump MAC registers */ +static void sxgbe_core_dump_regs(void __iomem *ioaddr) +{ +} + +static int sxgbe_get_lpi_status(void __iomem *ioaddr, const u32 irq_status) +{ + int status = 0; + int lpi_status; + + /* Reading this register shall clear all the LPI status bits */ + lpi_status = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + + if (lpi_status & LPI_CTRL_STATUS_TLPIEN) + status |= TX_ENTRY_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_TLPIEX) + status |= TX_EXIT_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_RLPIEN) + status |= RX_ENTRY_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_RLPIEX) + status |= RX_EXIT_LPI_MODE; + + return status; +} + +/* Handle extra events on specific interrupts hw dependent */ +static int sxgbe_core_host_irq_status(void __iomem *ioaddr, + struct sxgbe_extra_stats *x) +{ + int irq_status, status = 0; + + irq_status = readl(ioaddr + SXGBE_CORE_INT_STATUS_REG); + + if (unlikely(irq_status & LPI_INT_STATUS)) + status |= sxgbe_get_lpi_status(ioaddr, irq_status); + + return status; +} + +/* Set power management mode (e.g. magic frame) */ +static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode) +{ +} + +/* Set/Get Unicast MAC addresses */ +static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, + const unsigned char *addr, + unsigned int reg_n) +{ + u32 high_word, low_word; + + high_word = (addr[5] << 8) | (addr[4]); + low_word = (addr[3] << 24) | (addr[2] << 16) | + (addr[1] << 8) | (addr[0]); + writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); + writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); +} + +static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + u32 high_word, low_word; + + high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); + low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); + + /* extract and assign address */ + addr[5] = (high_word & 0x0000FF00) >> 8; + addr[4] = (high_word & 0x000000FF); + addr[3] = (low_word & 0xFF000000) >> 24; + addr[2] = (low_word & 0x00FF0000) >> 16; + addr[1] = (low_word & 0x0000FF00) >> 8; + addr[0] = (low_word & 0x000000FF); +} + +static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable) +{ + u32 tx_config; + + tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + tx_config &= ~SXGBE_TX_ENABLE; + + if (enable) + tx_config |= SXGBE_TX_ENABLE; + writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG); +} + +static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable) +{ + u32 rx_config; + + rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + rx_config &= ~SXGBE_RX_ENABLE; + + if (enable) + rx_config |= SXGBE_RX_ENABLE; + writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +static int sxgbe_get_controller_version(void __iomem *ioaddr) +{ + return readl(ioaddr + SXGBE_CORE_VERSION_REG); +} + +/* If supported then get the optional core features */ +static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr, + unsigned char feature_index) +{ + return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index))); +} + +static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed) +{ + u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + + /* clear the speed bits */ + tx_cfg &= ~0x60000000; + tx_cfg |= (speed << SXGBE_SPEED_LSHIFT); + + /* set the speed */ + writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG); +} + +static void sxgbe_core_enable_rxqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG); + reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num); + reg_val |= SXGBE_CORE_RXQ_ENABLE; + writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG); +} + +static void sxgbe_core_disable_rxqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG); + reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num); + reg_val |= SXGBE_CORE_RXQ_DISABLE; + writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG); +} + +static void sxgbe_set_eee_mode(void __iomem *ioaddr) +{ + u32 ctrl; + + /* Enable the LPI mode for transmit path with Tx automate bit set. + * When Tx Automate bit is set, MAC internally handles the entry + * to LPI mode after all outstanding and pending packets are + * transmitted. + */ + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + ctrl |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA; + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_reset_eee_mode(void __iomem *ioaddr) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + ctrl &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA); + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_set_eee_pls(void __iomem *ioaddr, const int link) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + + /* If the PHY link status is UP then set PLS */ + if (link) + ctrl |= LPI_CTRL_STATUS_PLS; + else + ctrl &= ~LPI_CTRL_STATUS_PLS; + + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_set_eee_timer(void __iomem *ioaddr, + const int ls, const int tw) +{ + int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16); + + /* Program the timers in the LPI timer control register: + * LS: minimum time (ms) for which the link + * status from PHY should be ok before transmitting + * the LPI pattern. + * TW: minimum time (us) for which the core waits + * after it has stopped transmitting the LPI pattern. + */ + writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL); +} + +static void sxgbe_enable_rx_csum(void __iomem *ioaddr) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE; + writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +static void sxgbe_disable_rx_csum(void __iomem *ioaddr) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE; + writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +static const struct sxgbe_core_ops core_ops = { + .core_init = sxgbe_core_init, + .dump_regs = sxgbe_core_dump_regs, + .host_irq_status = sxgbe_core_host_irq_status, + .pmt = sxgbe_core_pmt, + .set_umac_addr = sxgbe_core_set_umac_addr, + .get_umac_addr = sxgbe_core_get_umac_addr, + .enable_rx = sxgbe_enable_rx, + .enable_tx = sxgbe_enable_tx, + .get_controller_version = sxgbe_get_controller_version, + .get_hw_feature = sxgbe_get_hw_feature, + .set_speed = sxgbe_core_set_speed, + .set_eee_mode = sxgbe_set_eee_mode, + .reset_eee_mode = sxgbe_reset_eee_mode, + .set_eee_timer = sxgbe_set_eee_timer, + .set_eee_pls = sxgbe_set_eee_pls, + .enable_rx_csum = sxgbe_enable_rx_csum, + .disable_rx_csum = sxgbe_disable_rx_csum, + .enable_rxqueue = sxgbe_core_enable_rxqueue, + .disable_rxqueue = sxgbe_core_disable_rxqueue, +}; + +const struct sxgbe_core_ops *sxgbe_get_core_ops(void) +{ + return &core_ops; +} -- cgit v1.2.3