From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/sfc/enum.h | 176 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 drivers/net/ethernet/sfc/enum.h (limited to 'drivers/net/ethernet/sfc/enum.h') diff --git a/drivers/net/ethernet/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h new file mode 100644 index 000000000..cd590e068 --- /dev/null +++ b/drivers/net/ethernet/sfc/enum.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/**************************************************************************** + * Driver for Solarflare network controllers and boards + * Copyright 2007-2013 Solarflare Communications Inc. + */ + +#ifndef EFX_ENUM_H +#define EFX_ENUM_H + +/** + * enum efx_loopback_mode - loopback modes + * @LOOPBACK_NONE: no loopback + * @LOOPBACK_DATA: data path loopback + * @LOOPBACK_GMAC: loopback within GMAC + * @LOOPBACK_XGMII: loopback after XMAC + * @LOOPBACK_XGXS: loopback within BPX after XGXS + * @LOOPBACK_XAUI: loopback within BPX before XAUI serdes + * @LOOPBACK_GMII: loopback within BPX after GMAC + * @LOOPBACK_SGMII: loopback within BPX within SGMII + * @LOOPBACK_XGBR: loopback within BPX within XGBR + * @LOOPBACK_XFI: loopback within BPX before XFI serdes + * @LOOPBACK_XAUI_FAR: loopback within BPX after XAUI serdes + * @LOOPBACK_GMII_FAR: loopback within BPX before SGMII + * @LOOPBACK_SGMII_FAR: loopback within BPX after SGMII + * @LOOPBACK_XFI_FAR: loopback after XFI serdes + * @LOOPBACK_GPHY: loopback within 1G PHY at unspecified level + * @LOOPBACK_PHYXS: loopback within 10G PHY at PHYXS level + * @LOOPBACK_PCS: loopback within 10G PHY at PCS level + * @LOOPBACK_PMAPMD: loopback within 10G PHY at PMAPMD level + * @LOOPBACK_XPORT: cross port loopback + * @LOOPBACK_XGMII_WS: wireside loopback excluding XMAC + * @LOOPBACK_XAUI_WS: wireside loopback within BPX within XAUI serdes + * @LOOPBACK_XAUI_WS_FAR: wireside loopback within BPX including XAUI serdes + * @LOOPBACK_XAUI_WS_NEAR: wireside loopback within BPX excluding XAUI serdes + * @LOOPBACK_GMII_WS: wireside loopback excluding GMAC + * @LOOPBACK_XFI_WS: wireside loopback excluding XFI serdes + * @LOOPBACK_XFI_WS_FAR: wireside loopback including XFI serdes + * @LOOPBACK_PHYXS_WS: wireside loopback within 10G PHY at PHYXS level + */ +/* Please keep up-to-date w.r.t the following two #defines */ +enum efx_loopback_mode { + LOOPBACK_NONE = 0, + LOOPBACK_DATA = 1, + LOOPBACK_GMAC = 2, + LOOPBACK_XGMII = 3, + LOOPBACK_XGXS = 4, + LOOPBACK_XAUI = 5, + LOOPBACK_GMII = 6, + LOOPBACK_SGMII = 7, + LOOPBACK_XGBR = 8, + LOOPBACK_XFI = 9, + LOOPBACK_XAUI_FAR = 10, + LOOPBACK_GMII_FAR = 11, + LOOPBACK_SGMII_FAR = 12, + LOOPBACK_XFI_FAR = 13, + LOOPBACK_GPHY = 14, + LOOPBACK_PHYXS = 15, + LOOPBACK_PCS = 16, + LOOPBACK_PMAPMD = 17, + LOOPBACK_XPORT = 18, + LOOPBACK_XGMII_WS = 19, + LOOPBACK_XAUI_WS = 20, + LOOPBACK_XAUI_WS_FAR = 21, + LOOPBACK_XAUI_WS_NEAR = 22, + LOOPBACK_GMII_WS = 23, + LOOPBACK_XFI_WS = 24, + LOOPBACK_XFI_WS_FAR = 25, + LOOPBACK_PHYXS_WS = 26, + LOOPBACK_MAX +}; +#define LOOPBACK_TEST_MAX LOOPBACK_PMAPMD + +/* These loopbacks occur within the controller */ +#define LOOPBACKS_INTERNAL ((1 << LOOPBACK_DATA) | \ + (1 << LOOPBACK_GMAC) | \ + (1 << LOOPBACK_XGMII)| \ + (1 << LOOPBACK_XGXS) | \ + (1 << LOOPBACK_XAUI) | \ + (1 << LOOPBACK_GMII) | \ + (1 << LOOPBACK_SGMII) | \ + (1 << LOOPBACK_XGBR) | \ + (1 << LOOPBACK_XFI) | \ + (1 << LOOPBACK_XAUI_FAR) | \ + (1 << LOOPBACK_GMII_FAR) | \ + (1 << LOOPBACK_SGMII_FAR) | \ + (1 << LOOPBACK_XFI_FAR) | \ + (1 << LOOPBACK_XGMII_WS) | \ + (1 << LOOPBACK_XAUI_WS) | \ + (1 << LOOPBACK_XAUI_WS_FAR) | \ + (1 << LOOPBACK_XAUI_WS_NEAR) | \ + (1 << LOOPBACK_GMII_WS) | \ + (1 << LOOPBACK_XFI_WS) | \ + (1 << LOOPBACK_XFI_WS_FAR)) + +#define LOOPBACKS_WS ((1 << LOOPBACK_XGMII_WS) | \ + (1 << LOOPBACK_XAUI_WS) | \ + (1 << LOOPBACK_XAUI_WS_FAR) | \ + (1 << LOOPBACK_XAUI_WS_NEAR) | \ + (1 << LOOPBACK_GMII_WS) | \ + (1 << LOOPBACK_XFI_WS) | \ + (1 << LOOPBACK_XFI_WS_FAR) | \ + (1 << LOOPBACK_PHYXS_WS)) + +#define LOOPBACKS_EXTERNAL(_efx) \ + ((_efx)->loopback_modes & ~LOOPBACKS_INTERNAL & \ + ~(1 << LOOPBACK_NONE)) + +#define LOOPBACK_MASK(_efx) \ + (1 << (_efx)->loopback_mode) + +#define LOOPBACK_INTERNAL(_efx) \ + (!!(LOOPBACKS_INTERNAL & LOOPBACK_MASK(_efx))) + +#define LOOPBACK_EXTERNAL(_efx) \ + (!!(LOOPBACK_MASK(_efx) & LOOPBACKS_EXTERNAL(_efx))) + +#define LOOPBACK_CHANGED(_from, _to, _mask) \ + (!!((LOOPBACK_MASK(_from) ^ LOOPBACK_MASK(_to)) & (_mask))) + +#define LOOPBACK_OUT_OF(_from, _to, _mask) \ + ((LOOPBACK_MASK(_from) & (_mask)) && !(LOOPBACK_MASK(_to) & (_mask))) + +/*****************************************************************************/ + +/** + * enum reset_type - reset types + * + * %RESET_TYPE_INVSIBLE, %RESET_TYPE_ALL, %RESET_TYPE_WORLD and + * %RESET_TYPE_DISABLE specify the method/scope of the reset. The + * other valuesspecify reasons, which efx_schedule_reset() will choose + * a method for. + * + * Reset methods are numbered in order of increasing scope. + * + * @RESET_TYPE_INVISIBLE: Reset datapath and MAC (Falcon only) + * @RESET_TYPE_RECOVER_OR_ALL: Try to recover. Apply RESET_TYPE_ALL + * if unsuccessful. + * @RESET_TYPE_ALL: Reset datapath, MAC and PHY + * @RESET_TYPE_WORLD: Reset as much as possible + * @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if + * unsuccessful. + * @RESET_TYPE_DATAPATH: Reset datapath only. + * @RESET_TYPE_MC_BIST: MC entering BIST mode. + * @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled + * @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog + * @RESET_TYPE_INT_ERROR: reset due to internal error + * @RESET_TYPE_DMA_ERROR: DMA error + * @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors + * @RESET_TYPE_MC_FAILURE: MC reboot/assertion + * @RESET_TYPE_MCDI_TIMEOUT: MCDI timeout. + */ +enum reset_type { + RESET_TYPE_INVISIBLE, + RESET_TYPE_RECOVER_OR_ALL, + RESET_TYPE_ALL, + RESET_TYPE_WORLD, + RESET_TYPE_RECOVER_OR_DISABLE, + RESET_TYPE_DATAPATH, + RESET_TYPE_MC_BIST, + RESET_TYPE_DISABLE, + RESET_TYPE_MAX_METHOD, + RESET_TYPE_TX_WATCHDOG, + RESET_TYPE_INT_ERROR, + RESET_TYPE_DMA_ERROR, + RESET_TYPE_TX_SKIP, + RESET_TYPE_MC_FAILURE, + /* RESET_TYPE_MCDI_TIMEOUT is actually a method, not just a reason, but + * it doesn't fit the scope hierarchy (not well-ordered by inclusion). + * We encode this by having its enum value be greater than + * RESET_TYPE_MAX_METHOD. + */ + RESET_TYPE_MCDI_TIMEOUT, + RESET_TYPE_MAX, +}; + +#endif /* EFX_ENUM_H */ -- cgit v1.2.3