From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 224 +++++++++++++++++++++ 1 file changed, 224 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c new file mode 100644 index 000000000..8b50f0305 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0-only +/******************************************************************************* + Copyright (C) 2013 Vayavya Labs Pvt Ltd + + This implements all the API for managing HW timestamp & PTP. + + + Author: Rayagond Kokatanur + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include +#include +#include "common.h" +#include "stmmac_ptp.h" +#include "dwmac4.h" +#include "stmmac.h" + +static void config_hw_tstamping(void __iomem *ioaddr, u32 data) +{ + writel(data, ioaddr + PTP_TCR); +} + +static void config_sub_second_increment(void __iomem *ioaddr, + u32 ptp_clock, int gmac4, u32 *ssinc) +{ + u32 value = readl(ioaddr + PTP_TCR); + unsigned long data; + u32 reg_value; + + /* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second + * increment to twice the number of nanoseconds of a clock cycle. + * The calculation of the default_addend value by the caller will set it + * to mid-range = 2^31 when the remainder of this division is zero, + * which will make the accumulator overflow once every 2 ptp_clock + * cycles, adding twice the number of nanoseconds of a clock cycle : + * 2000000000ULL / ptp_clock. + */ + if (value & PTP_TCR_TSCFUPDT) + data = (2000000000ULL / ptp_clock); + else + data = (1000000000ULL / ptp_clock); + + /* 0.465ns accuracy */ + if (!(value & PTP_TCR_TSCTRLSSR)) + data = (data * 1000) / 465; + + if (data > PTP_SSIR_SSINC_MAX) + data = PTP_SSIR_SSINC_MAX; + + reg_value = data; + if (gmac4) + reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT; + + writel(reg_value, ioaddr + PTP_SSIR); + + if (ssinc) + *ssinc = data; +} + +static int init_systime(void __iomem *ioaddr, u32 sec, u32 nsec) +{ + u32 value; + + writel(sec, ioaddr + PTP_STSUR); + writel(nsec, ioaddr + PTP_STNSUR); + /* issue command to initialize the system time value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSINIT; + writel(value, ioaddr + PTP_TCR); + + /* wait for present system time initialize to complete */ + return readl_poll_timeout_atomic(ioaddr + PTP_TCR, value, + !(value & PTP_TCR_TSINIT), + 10, 100000); +} + +static int config_addend(void __iomem *ioaddr, u32 addend) +{ + u32 value; + int limit; + + writel(addend, ioaddr + PTP_TAR); + /* issue command to update the addend value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSADDREG; + writel(value, ioaddr + PTP_TCR); + + /* wait for present addend update to complete */ + limit = 10; + while (limit--) { + if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSADDREG)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + return 0; +} + +static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec, + int add_sub, int gmac4) +{ + u32 value; + int limit; + + if (add_sub) { + /* If the new sec value needs to be subtracted with + * the system time, then MAC_STSUR reg should be + * programmed with (2^32 – ) + */ + if (gmac4) + sec = -sec; + + value = readl(ioaddr + PTP_TCR); + if (value & PTP_TCR_TSCTRLSSR) + nsec = (PTP_DIGITAL_ROLLOVER_MODE - nsec); + else + nsec = (PTP_BINARY_ROLLOVER_MODE - nsec); + } + + writel(sec, ioaddr + PTP_STSUR); + value = (add_sub << PTP_STNSUR_ADDSUB_SHIFT) | nsec; + writel(value, ioaddr + PTP_STNSUR); + + /* issue command to initialize the system time value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSUPDT; + writel(value, ioaddr + PTP_TCR); + + /* wait for present system time adjust/update to complete */ + limit = 10; + while (limit--) { + if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSUPDT)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + return 0; +} + +static void get_systime(void __iomem *ioaddr, u64 *systime) +{ + u64 ns, sec0, sec1; + + /* Get the TSS value */ + sec1 = readl_relaxed(ioaddr + PTP_STSR); + do { + sec0 = sec1; + /* Get the TSSS value */ + ns = readl_relaxed(ioaddr + PTP_STNSR); + /* Get the TSS value */ + sec1 = readl_relaxed(ioaddr + PTP_STSR); + } while (sec0 != sec1); + + if (systime) + *systime = ns + (sec1 * 1000000000ULL); +} + +static void get_ptptime(void __iomem *ptpaddr, u64 *ptp_time) +{ + u64 ns; + + ns = readl(ptpaddr + PTP_ATNR); + ns += readl(ptpaddr + PTP_ATSR) * NSEC_PER_SEC; + + *ptp_time = ns; +} + +static void timestamp_interrupt(struct stmmac_priv *priv) +{ + u32 num_snapshot, ts_status, tsync_int; + struct ptp_clock_event event; + unsigned long flags; + u64 ptp_time; + int i; + + if (priv->plat->int_snapshot_en) { + wake_up(&priv->tstamp_busy_wait); + return; + } + + tsync_int = readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE; + + if (!tsync_int) + return; + + /* Read timestamp status to clear interrupt from either external + * timestamp or start/end of PPS. + */ + ts_status = readl(priv->ioaddr + GMAC_TIMESTAMP_STATUS); + + if (!priv->plat->ext_snapshot_en) + return; + + num_snapshot = (ts_status & GMAC_TIMESTAMP_ATSNS_MASK) >> + GMAC_TIMESTAMP_ATSNS_SHIFT; + + for (i = 0; i < num_snapshot; i++) { + read_lock_irqsave(&priv->ptp_lock, flags); + get_ptptime(priv->ptpaddr, &ptp_time); + read_unlock_irqrestore(&priv->ptp_lock, flags); + event.type = PTP_CLOCK_EXTTS; + event.index = 0; + event.timestamp = ptp_time; + ptp_clock_event(priv->ptp_clock, &event); + } +} + +const struct stmmac_hwtimestamp stmmac_ptp = { + .config_hw_tstamping = config_hw_tstamping, + .init_systime = init_systime, + .config_sub_second_increment = config_sub_second_increment, + .config_addend = config_addend, + .adjust_systime = adjust_systime, + .get_systime = get_systime, + .get_ptptime = get_ptptime, + .timestamp_interrupt = timestamp_interrupt, +}; -- cgit v1.2.3