From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ethernet/ti/davinci_mdio.c | 786 +++++++++++++++++++++++++++++++++ 1 file changed, 786 insertions(+) create mode 100644 drivers/net/ethernet/ti/davinci_mdio.c (limited to 'drivers/net/ethernet/ti/davinci_mdio.c') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c new file mode 100644 index 000000000..23169e36a --- /dev/null +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -0,0 +1,786 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DaVinci MDIO Module driver + * + * Copyright (C) 2010 Texas Instruments. + * + * Shamelessly ripped out of davinci_emac.c, original copyrights follow: + * + * Copyright (C) 2009 Texas Instruments. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This timeout definition is a worst-case ultra defensive measure against + * unexpected controller lock ups. Ideally, we should never ever hit this + * scenario in practice. + */ +#define MDIO_TIMEOUT 100 /* msecs */ + +#define PHY_REG_MASK 0x1f +#define PHY_ID_MASK 0x1f + +#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */ + +struct davinci_mdio_of_param { + int autosuspend_delay_ms; + bool manual_mode; +}; + +struct davinci_mdio_regs { + u32 version; + u32 control; +#define CONTROL_IDLE BIT(31) +#define CONTROL_ENABLE BIT(30) +#define CONTROL_MAX_DIV (0xffff) +#define CONTROL_CLKDIV GENMASK(15, 0) + +#define MDIO_MAN_MDCLK_O BIT(2) +#define MDIO_MAN_OE BIT(1) +#define MDIO_MAN_PIN BIT(0) +#define MDIO_MANUALMODE BIT(31) + +#define MDIO_PIN 0 + + + u32 alive; + u32 link; + u32 linkintraw; + u32 linkintmasked; + u32 __reserved_0[2]; + u32 userintraw; + u32 userintmasked; + u32 userintmaskset; + u32 userintmaskclr; + u32 manualif; + u32 poll; + u32 __reserved_1[18]; + + struct { + u32 access; +#define USERACCESS_GO BIT(31) +#define USERACCESS_WRITE BIT(30) +#define USERACCESS_ACK BIT(29) +#define USERACCESS_READ (0) +#define USERACCESS_DATA (0xffff) + + u32 physel; + } user[]; +}; + +static const struct mdio_platform_data default_pdata = { + .bus_freq = DEF_OUT_FREQ, +}; + +struct davinci_mdio_data { + struct mdio_platform_data pdata; + struct mdiobb_ctrl bb_ctrl; + struct davinci_mdio_regs __iomem *regs; + struct clk *clk; + struct device *dev; + struct mii_bus *bus; + bool active_in_suspend; + unsigned long access_time; /* jiffies */ + /* Indicates that driver shouldn't modify phy_mask in case + * if MDIO bus is registered from DT. + */ + bool skip_scan; + u32 clk_div; + bool manual_mode; +}; + +static void davinci_mdio_init_clk(struct davinci_mdio_data *data) +{ + u32 mdio_in, div, mdio_out_khz, access_time; + + mdio_in = clk_get_rate(data->clk); + div = (mdio_in / data->pdata.bus_freq) - 1; + if (div > CONTROL_MAX_DIV) + div = CONTROL_MAX_DIV; + + data->clk_div = div; + /* + * One mdio transaction consists of: + * 32 bits of preamble + * 32 bits of transferred data + * 24 bits of bus yield (not needed unless shared?) + */ + mdio_out_khz = mdio_in / (1000 * (div + 1)); + access_time = (88 * 1000) / mdio_out_khz; + + /* + * In the worst case, we could be kicking off a user-access immediately + * after the mdio bus scan state-machine triggered its own read. If + * so, our request could get deferred by one access cycle. We + * defensively allow for 4 access cycles. + */ + data->access_time = usecs_to_jiffies(access_time * 4); + if (!data->access_time) + data->access_time = 1; +} + +static void davinci_mdio_enable(struct davinci_mdio_data *data) +{ + /* set enable and clock divider */ + writel(data->clk_div | CONTROL_ENABLE, &data->regs->control); +} + +static void davinci_mdio_disable(struct davinci_mdio_data *data) +{ + u32 reg; + + /* Disable MDIO state machine */ + reg = readl(&data->regs->control); + + reg &= ~CONTROL_CLKDIV; + reg |= data->clk_div; + + reg &= ~CONTROL_ENABLE; + writel(reg, &data->regs->control); +} + +static void davinci_mdio_enable_manual_mode(struct davinci_mdio_data *data) +{ + u32 reg; + /* set manual mode */ + reg = readl(&data->regs->poll); + reg |= MDIO_MANUALMODE; + writel(reg, &data->regs->poll); +} + +static void davinci_set_mdc(struct mdiobb_ctrl *ctrl, int level) +{ + struct davinci_mdio_data *data; + u32 reg; + + data = container_of(ctrl, struct davinci_mdio_data, bb_ctrl); + reg = readl(&data->regs->manualif); + + if (level) + reg |= MDIO_MAN_MDCLK_O; + else + reg &= ~MDIO_MAN_MDCLK_O; + + writel(reg, &data->regs->manualif); +} + +static void davinci_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output) +{ + struct davinci_mdio_data *data; + u32 reg; + + data = container_of(ctrl, struct davinci_mdio_data, bb_ctrl); + reg = readl(&data->regs->manualif); + + if (output) + reg |= MDIO_MAN_OE; + else + reg &= ~MDIO_MAN_OE; + + writel(reg, &data->regs->manualif); +} + +static void davinci_set_mdio_data(struct mdiobb_ctrl *ctrl, int value) +{ + struct davinci_mdio_data *data; + u32 reg; + + data = container_of(ctrl, struct davinci_mdio_data, bb_ctrl); + reg = readl(&data->regs->manualif); + + if (value) + reg |= MDIO_MAN_PIN; + else + reg &= ~MDIO_MAN_PIN; + + writel(reg, &data->regs->manualif); +} + +static int davinci_get_mdio_data(struct mdiobb_ctrl *ctrl) +{ + struct davinci_mdio_data *data; + unsigned long reg; + + data = container_of(ctrl, struct davinci_mdio_data, bb_ctrl); + reg = readl(&data->regs->manualif); + return test_bit(MDIO_PIN, ®); +} + +static int davinci_mdiobb_read_c22(struct mii_bus *bus, int phy, int reg) +{ + int ret; + + ret = pm_runtime_resume_and_get(bus->parent); + if (ret < 0) + return ret; + + ret = mdiobb_read_c22(bus, phy, reg); + + pm_runtime_mark_last_busy(bus->parent); + pm_runtime_put_autosuspend(bus->parent); + + return ret; +} + +static int davinci_mdiobb_write_c22(struct mii_bus *bus, int phy, int reg, + u16 val) +{ + int ret; + + ret = pm_runtime_resume_and_get(bus->parent); + if (ret < 0) + return ret; + + ret = mdiobb_write_c22(bus, phy, reg, val); + + pm_runtime_mark_last_busy(bus->parent); + pm_runtime_put_autosuspend(bus->parent); + + return ret; +} + +static int davinci_mdiobb_read_c45(struct mii_bus *bus, int phy, int devad, + int reg) +{ + int ret; + + ret = pm_runtime_resume_and_get(bus->parent); + if (ret < 0) + return ret; + + ret = mdiobb_read_c45(bus, phy, devad, reg); + + pm_runtime_mark_last_busy(bus->parent); + pm_runtime_put_autosuspend(bus->parent); + + return ret; +} + +static int davinci_mdiobb_write_c45(struct mii_bus *bus, int phy, int devad, + int reg, u16 val) +{ + int ret; + + ret = pm_runtime_resume_and_get(bus->parent); + if (ret < 0) + return ret; + + ret = mdiobb_write_c45(bus, phy, devad, reg, val); + + pm_runtime_mark_last_busy(bus->parent); + pm_runtime_put_autosuspend(bus->parent); + + return ret; +} + +static int davinci_mdio_common_reset(struct davinci_mdio_data *data) +{ + u32 phy_mask, ver; + int ret; + + ret = pm_runtime_resume_and_get(data->dev); + if (ret < 0) + return ret; + + if (data->manual_mode) { + davinci_mdio_disable(data); + davinci_mdio_enable_manual_mode(data); + } + + /* wait for scan logic to settle */ + msleep(PHY_MAX_ADDR * data->access_time); + + /* dump hardware version info */ + ver = readl(&data->regs->version); + dev_info(data->dev, + "davinci mdio revision %d.%d, bus freq %ld\n", + (ver >> 8) & 0xff, ver & 0xff, + data->pdata.bus_freq); + + if (data->skip_scan) + goto done; + + /* get phy mask from the alive register */ + phy_mask = readl(&data->regs->alive); + if (phy_mask) { + /* restrict mdio bus to live phys only */ + dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); + phy_mask = ~phy_mask; + } else { + /* desperately scan all phys */ + dev_warn(data->dev, "no live phy, scanning all\n"); + phy_mask = 0; + } + data->bus->phy_mask = phy_mask; + +done: + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + return 0; +} + +static int davinci_mdio_reset(struct mii_bus *bus) +{ + struct davinci_mdio_data *data = bus->priv; + + return davinci_mdio_common_reset(data); +} + +static int davinci_mdiobb_reset(struct mii_bus *bus) +{ + struct mdiobb_ctrl *ctrl = bus->priv; + struct davinci_mdio_data *data; + + data = container_of(ctrl, struct davinci_mdio_data, bb_ctrl); + + return davinci_mdio_common_reset(data); +} + +/* wait until hardware is ready for another user access */ +static inline int wait_for_user_access(struct davinci_mdio_data *data) +{ + struct davinci_mdio_regs __iomem *regs = data->regs; + unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); + u32 reg; + + while (time_after(timeout, jiffies)) { + reg = readl(®s->user[0].access); + if ((reg & USERACCESS_GO) == 0) + return 0; + + reg = readl(®s->control); + if ((reg & CONTROL_IDLE) == 0) { + usleep_range(100, 200); + continue; + } + + /* + * An emac soft_reset may have clobbered the mdio controller's + * state machine. We need to reset and retry the current + * operation + */ + dev_warn(data->dev, "resetting idled controller\n"); + davinci_mdio_enable(data); + return -EAGAIN; + } + + reg = readl(®s->user[0].access); + if ((reg & USERACCESS_GO) == 0) + return 0; + + dev_err(data->dev, "timed out waiting for user access\n"); + return -ETIMEDOUT; +} + +/* wait until hardware state machine is idle */ +static inline int wait_for_idle(struct davinci_mdio_data *data) +{ + struct davinci_mdio_regs __iomem *regs = data->regs; + u32 val, ret; + + ret = readl_poll_timeout(®s->control, val, val & CONTROL_IDLE, + 0, MDIO_TIMEOUT * 1000); + if (ret) + dev_err(data->dev, "timed out waiting for idle\n"); + + return ret; +} + +static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) +{ + struct davinci_mdio_data *data = bus->priv; + u32 reg; + int ret; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + ret = pm_runtime_resume_and_get(data->dev); + if (ret < 0) + return ret; + + reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | + (phy_id << 16)); + + while (1) { + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + writel(reg, &data->regs->user[0].access); + + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + reg = readl(&data->regs->user[0].access); + ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO; + break; + } + + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + return ret; +} + +static int davinci_mdio_write(struct mii_bus *bus, int phy_id, + int phy_reg, u16 phy_data) +{ + struct davinci_mdio_data *data = bus->priv; + u32 reg; + int ret; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + ret = pm_runtime_resume_and_get(data->dev); + if (ret < 0) + return ret; + + reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | + (phy_id << 16) | (phy_data & USERACCESS_DATA)); + + while (1) { + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + writel(reg, &data->regs->user[0].access); + + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + break; + } + + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + return ret; +} + +static int davinci_mdio_probe_dt(struct mdio_platform_data *data, + struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + u32 prop; + + if (!node) + return -EINVAL; + + if (of_property_read_u32(node, "bus_freq", &prop)) { + dev_err(&pdev->dev, "Missing bus_freq property in the DT.\n"); + return -EINVAL; + } + data->bus_freq = prop; + + return 0; +} + +struct k3_mdio_soc_data { + bool manual_mode; +}; + +static const struct k3_mdio_soc_data am65_mdio_soc_data = { + .manual_mode = true, +}; + +static const struct soc_device_attribute k3_mdio_socinfo[] = { + { .family = "AM62X", .revision = "SR1.0", .data = &am65_mdio_soc_data }, + { .family = "AM64X", .revision = "SR1.0", .data = &am65_mdio_soc_data }, + { .family = "AM64X", .revision = "SR2.0", .data = &am65_mdio_soc_data }, + { .family = "AM65X", .revision = "SR1.0", .data = &am65_mdio_soc_data }, + { .family = "AM65X", .revision = "SR2.0", .data = &am65_mdio_soc_data }, + { .family = "J7200", .revision = "SR1.0", .data = &am65_mdio_soc_data }, + { .family = "J7200", .revision = "SR2.0", .data = &am65_mdio_soc_data }, + { .family = "J721E", .revision = "SR1.0", .data = &am65_mdio_soc_data }, + { .family = "J721E", .revision = "SR2.0", .data = &am65_mdio_soc_data }, + { .family = "J721S2", .revision = "SR1.0", .data = &am65_mdio_soc_data}, + { /* sentinel */ }, +}; + +#if IS_ENABLED(CONFIG_OF) +static const struct davinci_mdio_of_param of_cpsw_mdio_data = { + .autosuspend_delay_ms = 100, +}; + +static const struct of_device_id davinci_mdio_of_mtable[] = { + { .compatible = "ti,davinci_mdio", }, + { .compatible = "ti,cpsw-mdio", .data = &of_cpsw_mdio_data}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable); +#endif + +static const struct mdiobb_ops davinci_mdiobb_ops = { + .owner = THIS_MODULE, + .set_mdc = davinci_set_mdc, + .set_mdio_dir = davinci_set_mdio_dir, + .set_mdio_data = davinci_set_mdio_data, + .get_mdio_data = davinci_get_mdio_data, +}; + +static int davinci_mdio_probe(struct platform_device *pdev) +{ + struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + struct davinci_mdio_data *data; + struct resource *res; + struct phy_device *phy; + int ret, addr; + int autosuspend_delay_ms = -1; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->manual_mode = false; + data->bb_ctrl.ops = &davinci_mdiobb_ops; + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + const struct soc_device_attribute *soc_match_data; + + soc_match_data = soc_device_match(k3_mdio_socinfo); + if (soc_match_data && soc_match_data->data) { + const struct k3_mdio_soc_data *socdata = + soc_match_data->data; + + data->manual_mode = socdata->manual_mode; + } + } + + if (data->manual_mode) + data->bus = alloc_mdio_bitbang(&data->bb_ctrl); + else + data->bus = devm_mdiobus_alloc(dev); + + if (!data->bus) { + dev_err(dev, "failed to alloc mii bus\n"); + return -ENOMEM; + } + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + const struct davinci_mdio_of_param *of_mdio_data; + + ret = davinci_mdio_probe_dt(&data->pdata, pdev); + if (ret) + return ret; + snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); + + of_mdio_data = of_device_get_match_data(&pdev->dev); + if (of_mdio_data) { + autosuspend_delay_ms = + of_mdio_data->autosuspend_delay_ms; + } + } else { + data->pdata = pdata ? (*pdata) : default_pdata; + snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x", + pdev->name, pdev->id); + } + + data->bus->name = dev_name(dev); + + if (data->manual_mode) { + data->bus->read = davinci_mdiobb_read_c22; + data->bus->write = davinci_mdiobb_write_c22; + data->bus->read_c45 = davinci_mdiobb_read_c45; + data->bus->write_c45 = davinci_mdiobb_write_c45; + data->bus->reset = davinci_mdiobb_reset; + + dev_info(dev, "Configuring MDIO in manual mode\n"); + } else { + data->bus->read = davinci_mdio_read; + data->bus->write = davinci_mdio_write; + data->bus->reset = davinci_mdio_reset; + data->bus->priv = data; + } + data->bus->parent = dev; + + data->clk = devm_clk_get(dev, "fck"); + if (IS_ERR(data->clk)) { + dev_err(dev, "failed to get device clock\n"); + return PTR_ERR(data->clk); + } + + dev_set_drvdata(dev, data); + data->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + data->regs = devm_ioremap(dev, res->start, resource_size(res)); + if (!data->regs) + return -ENOMEM; + + davinci_mdio_init_clk(data); + + pm_runtime_set_autosuspend_delay(&pdev->dev, autosuspend_delay_ms); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + /* register the mii bus + * Create PHYs from DT only in case if PHY child nodes are explicitly + * defined to support backward compatibility with DTs which assume that + * Davinci MDIO will always scan the bus for PHYs detection. + */ + if (dev->of_node && of_get_child_count(dev->of_node)) + data->skip_scan = true; + + ret = of_mdiobus_register(data->bus, dev->of_node); + if (ret) + goto bail_out; + + /* scan and dump the bus */ + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + phy = mdiobus_get_phy(data->bus, addr); + if (phy) { + dev_info(dev, "phy[%d]: device %s, driver %s\n", + phy->mdio.addr, phydev_name(phy), + phy->drv ? phy->drv->name : "unknown"); + } + } + + return 0; + +bail_out: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; +} + +static int davinci_mdio_remove(struct platform_device *pdev) +{ + struct davinci_mdio_data *data = platform_get_drvdata(pdev); + + if (data->bus) { + mdiobus_unregister(data->bus); + + if (data->manual_mode) + free_mdio_bitbang(data->bus); + } + + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int davinci_mdio_runtime_suspend(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + u32 ctrl; + + /* shutdown the scan state machine */ + ctrl = readl(&data->regs->control); + ctrl &= ~CONTROL_ENABLE; + writel(ctrl, &data->regs->control); + + if (!data->manual_mode) + wait_for_idle(data); + + return 0; +} + +static int davinci_mdio_runtime_resume(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + + if (data->manual_mode) { + davinci_mdio_disable(data); + davinci_mdio_enable_manual_mode(data); + } else { + davinci_mdio_enable(data); + } + return 0; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int davinci_mdio_suspend(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + int ret = 0; + + data->active_in_suspend = !pm_runtime_status_suspended(dev); + if (data->active_in_suspend) + ret = pm_runtime_force_suspend(dev); + if (ret < 0) + return ret; + + /* Select sleep pin state */ + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int davinci_mdio_resume(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + + /* Select default pin state */ + pinctrl_pm_select_default_state(dev); + + if (data->active_in_suspend) + pm_runtime_force_resume(dev); + + return 0; +} +#endif + +static const struct dev_pm_ops davinci_mdio_pm_ops = { + SET_RUNTIME_PM_OPS(davinci_mdio_runtime_suspend, + davinci_mdio_runtime_resume, NULL) + SET_LATE_SYSTEM_SLEEP_PM_OPS(davinci_mdio_suspend, davinci_mdio_resume) +}; + +static struct platform_driver davinci_mdio_driver = { + .driver = { + .name = "davinci_mdio", + .pm = &davinci_mdio_pm_ops, + .of_match_table = of_match_ptr(davinci_mdio_of_mtable), + }, + .probe = davinci_mdio_probe, + .remove = davinci_mdio_remove, +}; + +static int __init davinci_mdio_init(void) +{ + return platform_driver_register(&davinci_mdio_driver); +} +device_initcall(davinci_mdio_init); + +static void __exit davinci_mdio_exit(void) +{ + platform_driver_unregister(&davinci_mdio_driver); +} +module_exit(davinci_mdio_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DaVinci MDIO driver"); -- cgit v1.2.3