From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/fddi/skfp/h/targetos.h | 160 +++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 drivers/net/fddi/skfp/h/targetos.h (limited to 'drivers/net/fddi/skfp/h/targetos.h') diff --git a/drivers/net/fddi/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h new file mode 100644 index 000000000..2474e12ac --- /dev/null +++ b/drivers/net/fddi/skfp/h/targetos.h @@ -0,0 +1,160 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Operating system specific definitions for driver and + * hardware module. + */ + +#ifndef TARGETOS_H +#define TARGETOS_H + + +//-------- those should go into include/linux/pci.h +#define PCI_VENDOR_ID_SK 0x1148 +#define PCI_DEVICE_ID_SK_FP 0x4000 +//-------- + + + +//-------- those should go into include/linux/if_fddi.h +#define FDDI_MAC_HDR_LEN 13 + +#define FDDI_RII 0x01 /* routing information bit */ +#define FDDI_RCF_DIR_BIT 0x80 +#define FDDI_RCF_LEN_MASK 0x1f +#define FDDI_RCF_BROADCAST 0x8000 +#define FDDI_RCF_LIMITED_BROADCAST 0xA000 +#define FDDI_RCF_FRAME2K 0x20 +#define FDDI_RCF_FRAME4K 0x30 +//-------- + + +#undef ADDR + +#include +#include +#include +#include +#include + +// is redefined by linux, but we need our definition +#undef ADDR +#ifdef MEM_MAPPED_IO +#define ADDR(a) (smc->hw.iop+(a)) +#else +#define ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) +#endif + +#include "hwmtm.h" + +#define TRUE 1 +#define FALSE 0 + +// HWM Definitions +// ----------------------- +#define FDDI_TRACE(string, arg1, arg2, arg3) // Performance analysis. +#ifdef PCI +#define NDD_TRACE(string, arg1, arg2, arg3) // Performance analysis. +#endif // PCI +#define SMT_PAGESIZE PAGE_SIZE // Size of a memory page (power of 2). +// ----------------------- + + +// SMT Definitions +// ----------------------- +#define TICKS_PER_SECOND HZ +#define SMC_VERSION 1 +// ----------------------- + + +// OS-Driver Definitions +// ----------------------- +#define NO_ADDRESS 0xffe0 /* No Device (I/O) Address */ +#define SKFP_MAX_NUM_BOARDS 8 /* maximum number of PCI boards */ + +#define SK_BUS_TYPE_PCI 0 +#define SK_BUS_TYPE_EISA 1 + +#define FP_IO_LEN 256 /* length of IO area used */ + +#define u8 unsigned char +#define u16 unsigned short +#define u32 unsigned int + +#define MAX_TX_QUEUE_LEN 20 // number of packets queued by driver +#define MAX_FRAME_SIZE 4550 + +#define RX_LOW_WATERMARK NUM_RECEIVE_BUFFERS / 2 +#define TX_LOW_WATERMARK NUM_TRANSMIT_BUFFERS - 2 + +/* +** Include the IOCTL stuff +*/ +#include + +#define SKFPIOCTL SIOCDEVPRIVATE + +struct s_skfp_ioctl { + unsigned short cmd; /* Command to run */ + unsigned short len; /* Length of the data buffer */ + unsigned char __user *data; /* Pointer to the data buffer */ +}; + +/* +** Recognised ioctl commands for the driver +*/ +#define SKFP_GET_STATS 0x05 /* Get the driver statistics */ +#define SKFP_CLR_STATS 0x06 /* Zero out the driver statistics */ + +// The per-adapter driver structure +struct s_smt_os { + struct net_device *dev; + struct net_device *next_module; + u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */ + struct pci_dev pdev; /* PCI device structure */ + + unsigned long base_addr; + unsigned char factory_mac_addr[8]; + ulong SharedMemSize; + ulong SharedMemHeap; + void* SharedMemAddr; + dma_addr_t SharedMemDMA; + + ulong QueueSkb; + struct sk_buff_head SendSkbQueue; + + ulong MaxFrameSize; + u8 ResetRequested; + + // MAC statistics structure + struct fddi_statistics MacStat; + + // receive into this local buffer if no skb available + // data will be not valid, because multiple RxDs can + // point here at the same time, it must be at least + // MAX_FRAME_SIZE bytes in size + unsigned char *LocalRxBuffer; + dma_addr_t LocalRxBufferDMA; + + // Version (required by SMT module). + u_long smc_version ; + + // Required by Hardware Module (HWM). + struct hw_modul hwm ; + + // For SMP-savety + spinlock_t DriverLock; + +}; + +typedef struct s_smt_os skfddi_priv; + +#endif // _TARGETOS_ -- cgit v1.2.3