From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/ipa/ipa_qmi_msg.h | 261 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) create mode 100644 drivers/net/ipa/ipa_qmi_msg.h (limited to 'drivers/net/ipa/ipa_qmi_msg.h') diff --git a/drivers/net/ipa/ipa_qmi_msg.h b/drivers/net/ipa/ipa_qmi_msg.h new file mode 100644 index 000000000..b73503552 --- /dev/null +++ b/drivers/net/ipa/ipa_qmi_msg.h @@ -0,0 +1,261 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (C) 2018-2022 Linaro Ltd. + */ +#ifndef _IPA_QMI_MSG_H_ +#define _IPA_QMI_MSG_H_ + +/* === Only "ipa_qmi" and "ipa_qmi_msg.c" should include this file === */ + +#include +#include + +/* Request/response/indication QMI message ids used for IPA. Receiving + * end issues a response for requests; indications require no response. + */ +#define IPA_QMI_INDICATION_REGISTER 0x20 /* modem -> AP request */ +#define IPA_QMI_INIT_DRIVER 0x21 /* AP -> modem request */ +#define IPA_QMI_INIT_COMPLETE 0x22 /* AP -> modem indication */ +#define IPA_QMI_DRIVER_INIT_COMPLETE 0x35 /* modem -> AP request */ + +/* The maximum size required for message types. These sizes include + * the message data, along with type (1 byte) and length (2 byte) + * information for each field. The qmi_send_*() interfaces require + * the message size to be provided. + */ +#define IPA_QMI_INDICATION_REGISTER_REQ_SZ 20 /* -> server handle */ +#define IPA_QMI_INDICATION_REGISTER_RSP_SZ 7 /* <- server handle */ +#define IPA_QMI_INIT_DRIVER_REQ_SZ 162 /* client handle -> */ +#define IPA_QMI_INIT_DRIVER_RSP_SZ 25 /* client handle <- */ +#define IPA_QMI_INIT_COMPLETE_IND_SZ 7 /* <- server handle */ +#define IPA_QMI_DRIVER_INIT_COMPLETE_REQ_SZ 4 /* -> server handle */ +#define IPA_QMI_DRIVER_INIT_COMPLETE_RSP_SZ 7 /* <- server handle */ + +/* Maximum size of messages we expect the AP to receive (max of above) */ +#define IPA_QMI_SERVER_MAX_RCV_SZ 8 +#define IPA_QMI_CLIENT_MAX_RCV_SZ 25 + +/* Request message for the IPA_QMI_INDICATION_REGISTER request */ +struct ipa_indication_register_req { + u8 master_driver_init_complete_valid; + u8 master_driver_init_complete; + u8 data_usage_quota_reached_valid; + u8 data_usage_quota_reached; + u8 ipa_mhi_ready_ind_valid; + u8 ipa_mhi_ready_ind; + u8 endpoint_desc_ind_valid; + u8 endpoint_desc_ind; + u8 bw_change_ind_valid; + u8 bw_change_ind; +}; + +/* The response to a IPA_QMI_INDICATION_REGISTER request consists only of + * a standard QMI response. + */ +struct ipa_indication_register_rsp { + struct qmi_response_type_v01 rsp; +}; + +/* Request message for the IPA_QMI_DRIVER_INIT_COMPLETE request */ +struct ipa_driver_init_complete_req { + u8 status; +}; + +/* The response to a IPA_QMI_DRIVER_INIT_COMPLETE request consists only + * of a standard QMI response. + */ +struct ipa_driver_init_complete_rsp { + struct qmi_response_type_v01 rsp; +}; + +/* The message for the IPA_QMI_INIT_COMPLETE_IND indication consists + * only of a standard QMI response. + */ +struct ipa_init_complete_ind { + struct qmi_response_type_v01 status; +}; + +/* The AP tells the modem its platform type. We assume Android. */ +enum ipa_platform_type { + IPA_QMI_PLATFORM_TYPE_INVALID = 0x0, /* Invalid */ + IPA_QMI_PLATFORM_TYPE_TN = 0x1, /* Data card */ + IPA_QMI_PLATFORM_TYPE_LE = 0x2, /* Data router */ + IPA_QMI_PLATFORM_TYPE_MSM_ANDROID = 0x3, /* Android MSM */ + IPA_QMI_PLATFORM_TYPE_MSM_WINDOWS = 0x4, /* Windows MSM */ + IPA_QMI_PLATFORM_TYPE_MSM_QNX_V01 = 0x5, /* QNX MSM */ +}; + +/* This defines the start and end offset of a range of memory. The start + * value is a byte offset relative to the start of IPA shared memory. The + * end value is the last addressable unit *within* the range. Typically + * the end value is in units of bytes, however it can also be a maximum + * array index value. + */ +struct ipa_mem_bounds { + u32 start; + u32 end; +}; + +/* This defines the location and size of an array. The start value + * is an offset relative to the start of IPA shared memory. The + * size of the array is implied by the number of entries (the entry + * size is assumed to be known). + */ +struct ipa_mem_array { + u32 start; + u32 count; +}; + +/* This defines the location and size of a range of memory. The + * start is an offset relative to the start of IPA shared memory. + * This differs from the ipa_mem_bounds structure in that the size + * (in bytes) of the memory region is specified rather than the + * offset of its last byte. + */ +struct ipa_mem_range { + u32 start; + u32 size; +}; + +/* The message for the IPA_QMI_INIT_DRIVER request contains information + * from the AP that affects modem initialization. + */ +struct ipa_init_modem_driver_req { + u8 platform_type_valid; + u32 platform_type; /* enum ipa_platform_type */ + + /* Modem header table information. This defines the IPA shared + * memory in which the modem may insert header table entries. + */ + u8 hdr_tbl_info_valid; + struct ipa_mem_bounds hdr_tbl_info; + + /* Routing table information. These define the location and maximum + * *index* (not byte) for the modem portion of non-hashable IPv4 and + * IPv6 routing tables. The start values are byte offsets relative + * to the start of IPA shared memory. + */ + u8 v4_route_tbl_info_valid; + struct ipa_mem_bounds v4_route_tbl_info; + u8 v6_route_tbl_info_valid; + struct ipa_mem_bounds v6_route_tbl_info; + + /* Filter table information. These define the location of the + * non-hashable IPv4 and IPv6 filter tables. The start values are + * byte offsets relative to the start of IPA shared memory. + */ + u8 v4_filter_tbl_start_valid; + u32 v4_filter_tbl_start; + u8 v6_filter_tbl_start_valid; + u32 v6_filter_tbl_start; + + /* Modem memory information. This defines the location and + * size of memory available for the modem to use. + */ + u8 modem_mem_info_valid; + struct ipa_mem_range modem_mem_info; + + /* This defines the destination endpoint on the AP to which + * the modem driver can send control commands. Must be less + * than ipa_endpoint_max(). + */ + u8 ctrl_comm_dest_end_pt_valid; + u32 ctrl_comm_dest_end_pt; + + /* This defines whether the modem should load the microcontroller + * or not. It is unnecessary to reload it if the modem is being + * restarted. + * + * NOTE: this field is named "is_ssr_bootup" elsewhere. + */ + u8 skip_uc_load_valid; + u8 skip_uc_load; + + /* Processing context memory information. This defines the memory in + * which the modem may insert header processing context table entries. + */ + u8 hdr_proc_ctx_tbl_info_valid; + struct ipa_mem_bounds hdr_proc_ctx_tbl_info; + + /* Compression command memory information. This defines the memory + * in which the modem may insert compression/decompression commands. + */ + u8 zip_tbl_info_valid; + struct ipa_mem_bounds zip_tbl_info; + + /* Routing table information. These define the location and maximum + * *index* (not byte) for the modem portion of hashable IPv4 and IPv6 + * routing tables (if supported by hardware). The start values are + * byte offsets relative to the start of IPA shared memory. + */ + u8 v4_hash_route_tbl_info_valid; + struct ipa_mem_bounds v4_hash_route_tbl_info; + u8 v6_hash_route_tbl_info_valid; + struct ipa_mem_bounds v6_hash_route_tbl_info; + + /* Filter table information. These define the location and size + * of hashable IPv4 and IPv6 filter tables (if supported by hardware). + * The start values are byte offsets relative to the start of IPA + * shared memory. + */ + u8 v4_hash_filter_tbl_start_valid; + u32 v4_hash_filter_tbl_start; + u8 v6_hash_filter_tbl_start_valid; + u32 v6_hash_filter_tbl_start; + + /* Statistics information. These define the locations of the + * first and last statistics sub-regions. (IPA v4.0 and above) + */ + u8 hw_stats_quota_base_addr_valid; + u32 hw_stats_quota_base_addr; + u8 hw_stats_quota_size_valid; + u32 hw_stats_quota_size; + u8 hw_stats_drop_base_addr_valid; + u32 hw_stats_drop_base_addr; + u8 hw_stats_drop_size_valid; + u32 hw_stats_drop_size; +}; + +/* The response to a IPA_QMI_INIT_DRIVER request begins with a standard + * QMI response, but contains other information as well. Currently we + * simply wait for the INIT_DRIVER transaction to complete and + * ignore any other data that might be returned. + */ +struct ipa_init_modem_driver_rsp { + struct qmi_response_type_v01 rsp; + + /* This defines the destination endpoint on the modem to which + * the AP driver can send control commands. Must be less than + * ipa_endpoint_max(). + */ + u8 ctrl_comm_dest_end_pt_valid; + u32 ctrl_comm_dest_end_pt; + + /* This defines the default endpoint. The AP driver is not + * required to configure the hardware with this value. Must + * be less than ipa_endpoint_max(). + */ + u8 default_end_pt_valid; + u32 default_end_pt; + + /* This defines whether a second handshake is required to complete + * initialization. + */ + u8 modem_driver_init_pending_valid; + u8 modem_driver_init_pending; +}; + +/* Message structure definitions defined in "ipa_qmi_msg.c" */ +extern const struct qmi_elem_info ipa_indication_register_req_ei[]; +extern const struct qmi_elem_info ipa_indication_register_rsp_ei[]; +extern const struct qmi_elem_info ipa_driver_init_complete_req_ei[]; +extern const struct qmi_elem_info ipa_driver_init_complete_rsp_ei[]; +extern const struct qmi_elem_info ipa_init_complete_ind_ei[]; +extern const struct qmi_elem_info ipa_mem_bounds_ei[]; +extern const struct qmi_elem_info ipa_mem_array_ei[]; +extern const struct qmi_elem_info ipa_mem_range_ei[]; +extern const struct qmi_elem_info ipa_init_modem_driver_req_ei[]; +extern const struct qmi_elem_info ipa_init_modem_driver_rsp_ei[]; + +#endif /* !_IPA_QMI_MSG_H_ */ -- cgit v1.2.3