From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/mdio.c | 598 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 598 insertions(+) create mode 100644 drivers/net/mdio.c (limited to 'drivers/net/mdio.c') diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c new file mode 100644 index 000000000..e08c90ac0 --- /dev/null +++ b/drivers/net/mdio.c @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * mdio.c: Generic support for MDIO-compatible transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + */ + +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers"); +MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc."); +MODULE_LICENSE("GPL"); + +/** + * mdio45_probe - probe for an MDIO (clause 45) device + * @mdio: MDIO interface + * @prtad: Expected PHY address + * + * This sets @prtad and @mmds in the MDIO interface if successful. + * Returns 0 on success, negative on error. + */ +int mdio45_probe(struct mdio_if_info *mdio, int prtad) +{ + int mmd, stat2, devs1, devs2; + + /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY + * XS or DTE XS; give up if none is present. */ + for (mmd = 1; mmd <= 5; mmd++) { + /* Is this MMD present? */ + stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2); + if (stat2 < 0 || + (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) + continue; + + /* It should tell us about all the other MMDs */ + devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1); + devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2); + if (devs1 < 0 || devs2 < 0) + continue; + + mdio->prtad = prtad; + mdio->mmds = devs1 | (devs2 << 16); + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(mdio45_probe); + +/** + * mdio_set_flag - set or clear flag in an MDIO register + * @mdio: MDIO interface + * @prtad: PHY address + * @devad: MMD address + * @addr: Register address + * @mask: Mask for flag (single bit set) + * @sense: New value of flag + * + * This debounces changes: it does not write the register if the flag + * already has the proper value. Returns 0 on success, negative on error. + */ +int mdio_set_flag(const struct mdio_if_info *mdio, + int prtad, int devad, u16 addr, int mask, + bool sense) +{ + int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr); + int new_val; + + if (old_val < 0) + return old_val; + if (sense) + new_val = old_val | mask; + else + new_val = old_val & ~mask; + if (old_val == new_val) + return 0; + return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val); +} +EXPORT_SYMBOL(mdio_set_flag); + +/** + * mdio45_links_ok - is link status up/OK + * @mdio: MDIO interface + * @mmd_mask: Mask for MMDs to check + * + * Returns 1 if the PHY reports link status up/OK, 0 otherwise. + * @mmd_mask is normally @mdio->mmds, but if loopback is enabled + * the MMDs being bypassed should be excluded from the mask. + */ +int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask) +{ + int devad, reg; + + if (!mmd_mask) { + /* Use absence of XGMII faults in lieu of link state */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_PHYXS, MDIO_STAT2); + return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT); + } + + for (devad = 0; mmd_mask; devad++) { + if (mmd_mask & (1 << devad)) { + mmd_mask &= ~(1 << devad); + + /* Reset the latched status and fault flags */ + mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT1); + if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS || + devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS) + mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT2); + + /* Check the current status and fault flags */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT1); + if (reg < 0 || + (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) != + MDIO_STAT1_LSTATUS) + return false; + } + } + + return true; +} +EXPORT_SYMBOL(mdio45_links_ok); + +/** + * mdio45_nway_restart - restart auto-negotiation for this interface + * @mdio: MDIO interface + * + * Returns 0 on success, negative on error. + */ +int mdio45_nway_restart(const struct mdio_if_info *mdio) +{ + if (!(mdio->mmds & MDIO_DEVS_AN)) + return -EOPNOTSUPP; + + mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1, + MDIO_AN_CTRL1_RESTART, true); + return 0; +} +EXPORT_SYMBOL(mdio45_nway_restart); + +static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr) +{ + u32 result = 0; + int reg; + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr); + if (reg & ADVERTISE_10HALF) + result |= ADVERTISED_10baseT_Half; + if (reg & ADVERTISE_10FULL) + result |= ADVERTISED_10baseT_Full; + if (reg & ADVERTISE_100HALF) + result |= ADVERTISED_100baseT_Half; + if (reg & ADVERTISE_100FULL) + result |= ADVERTISED_100baseT_Full; + if (reg & ADVERTISE_PAUSE_CAP) + result |= ADVERTISED_Pause; + if (reg & ADVERTISE_PAUSE_ASYM) + result |= ADVERTISED_Asym_Pause; + return result; +} + +/** + * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET + * @mdio: MDIO interface + * @ecmd: Ethtool request structure + * @npage_adv: Modes currently advertised on next pages + * @npage_lpa: Modes advertised by link partner on next pages + * + * The @ecmd parameter is expected to have been cleared before calling + * mdio45_ethtool_gset_npage(). + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. The + * caller must pass them in. + */ +void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd, + u32 npage_adv, u32 npage_lpa) +{ + int reg; + u32 speed; + + BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); + BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); + + ecmd->transceiver = XCVR_INTERNAL; + ecmd->phy_address = mdio->prtad; + ecmd->mdio_support = + mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL2); + switch (reg & MDIO_PMA_CTRL2_TYPE) { + case MDIO_PMA_CTRL2_10GBT: + case MDIO_PMA_CTRL2_1000BT: + case MDIO_PMA_CTRL2_100BTX: + case MDIO_PMA_CTRL2_10BT: + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_SPEED); + if (reg & MDIO_SPEED_10G) + ecmd->supported |= SUPPORTED_10000baseT_Full; + if (reg & MDIO_PMA_SPEED_1000) + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + if (reg & MDIO_PMA_SPEED_100) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half); + if (reg & MDIO_PMA_SPEED_10) + ecmd->supported |= (SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half); + ecmd->advertising = ADVERTISED_TP; + break; + + case MDIO_PMA_CTRL2_10GBCX4: + ecmd->port = PORT_OTHER; + ecmd->supported = 0; + ecmd->advertising = 0; + break; + + case MDIO_PMA_CTRL2_10GBKX4: + case MDIO_PMA_CTRL2_10GBKR: + case MDIO_PMA_CTRL2_1000BKX: + ecmd->port = PORT_OTHER; + ecmd->supported = SUPPORTED_Backplane; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_EXTABLE); + if (reg & MDIO_PMA_EXTABLE_10GBKX4) + ecmd->supported |= SUPPORTED_10000baseKX4_Full; + if (reg & MDIO_PMA_EXTABLE_10GBKR) + ecmd->supported |= SUPPORTED_10000baseKR_Full; + if (reg & MDIO_PMA_EXTABLE_1000BKX) + ecmd->supported |= SUPPORTED_1000baseKX_Full; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBR_FECABLE); + if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) + ecmd->supported |= SUPPORTED_10000baseR_FEC; + ecmd->advertising = ADVERTISED_Backplane; + break; + + /* All the other defined modes are flavours of optical */ + default: + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = ADVERTISED_FIBRE; + break; + } + + if (mdio->mmds & MDIO_DEVS_AN) { + ecmd->supported |= SUPPORTED_Autoneg; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, + MDIO_CTRL1); + if (reg & MDIO_AN_CTRL1_ENABLE) { + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->advertising |= + ADVERTISED_Autoneg | + mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | + npage_adv; + } else { + ecmd->autoneg = AUTONEG_DISABLE; + } + } else { + ecmd->autoneg = AUTONEG_DISABLE; + } + + if (ecmd->autoneg) { + u32 modes = 0; + int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_AN, MDIO_STAT1); + + /* If AN is complete and successful, report best common + * mode, otherwise report best advertised mode. */ + if (an_stat & MDIO_AN_STAT1_COMPLETE) { + ecmd->lp_advertising = + mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; + if (an_stat & MDIO_AN_STAT1_LPABLE) + ecmd->lp_advertising |= ADVERTISED_Autoneg; + modes = ecmd->advertising & ecmd->lp_advertising; + } + if ((modes & ~ADVERTISED_Autoneg) == 0) + modes = ecmd->advertising; + + if (modes & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) { + speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseKX_Full)) { + speed = SPEED_1000; + ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { + speed = SPEED_100; + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); + } else { + speed = SPEED_10; + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); + } + } else { + /* Report forced settings */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL1); + speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) + * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); + ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || + speed == SPEED_10000); + } + + ethtool_cmd_speed_set(ecmd, speed); + + /* 10GBASE-T MDI/MDI-X */ + if (ecmd->port == PORT_TP + && (ethtool_cmd_speed(ecmd) == SPEED_10000)) { + switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBT_SWAPPOL)) { + case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: + ecmd->eth_tp_mdix = ETH_TP_MDI; + break; + case 0: + ecmd->eth_tp_mdix = ETH_TP_MDI_X; + break; + default: + /* It's complicated... */ + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + break; + } + } +} +EXPORT_SYMBOL(mdio45_ethtool_gset_npage); + +/** + * mdio45_ethtool_ksettings_get_npage - get settings for ETHTOOL_GLINKSETTINGS + * @mdio: MDIO interface + * @cmd: Ethtool request structure + * @npage_adv: Modes currently advertised on next pages + * @npage_lpa: Modes advertised by link partner on next pages + * + * The @cmd parameter is expected to have been cleared before calling + * mdio45_ethtool_ksettings_get_npage(). + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. The + * caller must pass them in. + */ +void mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, + struct ethtool_link_ksettings *cmd, + u32 npage_adv, u32 npage_lpa) +{ + int reg; + u32 speed, supported = 0, advertising = 0, lp_advertising = 0; + + BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); + BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); + + cmd->base.phy_address = mdio->prtad; + cmd->base.mdio_support = + mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL2); + switch (reg & MDIO_PMA_CTRL2_TYPE) { + case MDIO_PMA_CTRL2_10GBT: + case MDIO_PMA_CTRL2_1000BT: + case MDIO_PMA_CTRL2_100BTX: + case MDIO_PMA_CTRL2_10BT: + cmd->base.port = PORT_TP; + supported = SUPPORTED_TP; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_SPEED); + if (reg & MDIO_SPEED_10G) + supported |= SUPPORTED_10000baseT_Full; + if (reg & MDIO_PMA_SPEED_1000) + supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + if (reg & MDIO_PMA_SPEED_100) + supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half); + if (reg & MDIO_PMA_SPEED_10) + supported |= (SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half); + advertising = ADVERTISED_TP; + break; + + case MDIO_PMA_CTRL2_10GBCX4: + cmd->base.port = PORT_OTHER; + supported = 0; + advertising = 0; + break; + + case MDIO_PMA_CTRL2_10GBKX4: + case MDIO_PMA_CTRL2_10GBKR: + case MDIO_PMA_CTRL2_1000BKX: + cmd->base.port = PORT_OTHER; + supported = SUPPORTED_Backplane; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_EXTABLE); + if (reg & MDIO_PMA_EXTABLE_10GBKX4) + supported |= SUPPORTED_10000baseKX4_Full; + if (reg & MDIO_PMA_EXTABLE_10GBKR) + supported |= SUPPORTED_10000baseKR_Full; + if (reg & MDIO_PMA_EXTABLE_1000BKX) + supported |= SUPPORTED_1000baseKX_Full; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBR_FECABLE); + if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) + supported |= SUPPORTED_10000baseR_FEC; + advertising = ADVERTISED_Backplane; + break; + + /* All the other defined modes are flavours of optical */ + default: + cmd->base.port = PORT_FIBRE; + supported = SUPPORTED_FIBRE; + advertising = ADVERTISED_FIBRE; + break; + } + + if (mdio->mmds & MDIO_DEVS_AN) { + supported |= SUPPORTED_Autoneg; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, + MDIO_CTRL1); + if (reg & MDIO_AN_CTRL1_ENABLE) { + cmd->base.autoneg = AUTONEG_ENABLE; + advertising |= + ADVERTISED_Autoneg | + mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | + npage_adv; + } else { + cmd->base.autoneg = AUTONEG_DISABLE; + } + } else { + cmd->base.autoneg = AUTONEG_DISABLE; + } + + if (cmd->base.autoneg) { + u32 modes = 0; + int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_AN, MDIO_STAT1); + + /* If AN is complete and successful, report best common + * mode, otherwise report best advertised mode. + */ + if (an_stat & MDIO_AN_STAT1_COMPLETE) { + lp_advertising = + mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; + if (an_stat & MDIO_AN_STAT1_LPABLE) + lp_advertising |= ADVERTISED_Autoneg; + modes = advertising & lp_advertising; + } + if ((modes & ~ADVERTISED_Autoneg) == 0) + modes = advertising; + + if (modes & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) { + speed = SPEED_10000; + cmd->base.duplex = DUPLEX_FULL; + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseKX_Full)) { + speed = SPEED_1000; + cmd->base.duplex = !(modes & ADVERTISED_1000baseT_Half); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { + speed = SPEED_100; + cmd->base.duplex = !!(modes & ADVERTISED_100baseT_Full); + } else { + speed = SPEED_10; + cmd->base.duplex = !!(modes & ADVERTISED_10baseT_Full); + } + } else { + /* Report forced settings */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL1); + speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) + * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); + cmd->base.duplex = (reg & MDIO_CTRL1_FULLDPLX || + speed == SPEED_10000); + } + + cmd->base.speed = speed; + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising, + lp_advertising); + + /* 10GBASE-T MDI/MDI-X */ + if (cmd->base.port == PORT_TP && (cmd->base.speed == SPEED_10000)) { + switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBT_SWAPPOL)) { + case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: + cmd->base.eth_tp_mdix = ETH_TP_MDI; + break; + case 0: + cmd->base.eth_tp_mdix = ETH_TP_MDI_X; + break; + default: + /* It's complicated... */ + cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID; + break; + } + } +} +EXPORT_SYMBOL(mdio45_ethtool_ksettings_get_npage); + +/** + * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs + * @mdio: MDIO interface + * @mii_data: MII ioctl data structure + * @cmd: MII ioctl command + * + * Returns 0 on success, negative on error. + */ +int mdio_mii_ioctl(const struct mdio_if_info *mdio, + struct mii_ioctl_data *mii_data, int cmd) +{ + int prtad, devad; + u16 addr = mii_data->reg_num; + + /* Validate/convert cmd to one of SIOC{G,S}MIIREG */ + switch (cmd) { + case SIOCGMIIPHY: + if (mdio->prtad == MDIO_PRTAD_NONE) + return -EOPNOTSUPP; + mii_data->phy_id = mdio->prtad; + cmd = SIOCGMIIREG; + break; + case SIOCGMIIREG: + case SIOCSMIIREG: + break; + default: + return -EOPNOTSUPP; + } + + /* Validate/convert phy_id */ + if ((mdio->mode_support & MDIO_SUPPORTS_C45) && + mdio_phy_id_is_c45(mii_data->phy_id)) { + prtad = mdio_phy_id_prtad(mii_data->phy_id); + devad = mdio_phy_id_devad(mii_data->phy_id); + } else if ((mdio->mode_support & MDIO_SUPPORTS_C22) && + mii_data->phy_id < 0x20) { + prtad = mii_data->phy_id; + devad = MDIO_DEVAD_NONE; + addr &= 0x1f; + } else if ((mdio->mode_support & MDIO_EMULATE_C22) && + mdio->prtad != MDIO_PRTAD_NONE && + mii_data->phy_id == mdio->prtad) { + /* Remap commonly-used MII registers. */ + prtad = mdio->prtad; + switch (addr) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(mdio->mmds); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(mdio->mmds & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (addr == MII_ADVERTISE) + addr = MDIO_AN_ADVERTISE; + else + addr = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + } else { + return -EINVAL; + } + + if (cmd == SIOCGMIIREG) { + int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr); + if (rc < 0) + return rc; + mii_data->val_out = rc; + return 0; + } else { + return mdio->mdio_write(mdio->dev, prtad, devad, addr, + mii_data->val_in); + } +} +EXPORT_SYMBOL(mdio_mii_ioctl); -- cgit v1.2.3