From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/mdio/mdio-mux-meson-g12a.c | 363 +++++++++++++++++++++++++++++++++ 1 file changed, 363 insertions(+) create mode 100644 drivers/net/mdio/mdio-mux-meson-g12a.c (limited to 'drivers/net/mdio/mdio-mux-meson-g12a.c') diff --git a/drivers/net/mdio/mdio-mux-meson-g12a.c b/drivers/net/mdio/mdio-mux-meson-g12a.c new file mode 100644 index 000000000..910e5cf74 --- /dev/null +++ b/drivers/net/mdio/mdio-mux-meson-g12a.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019 Baylibre, SAS. + * Author: Jerome Brunet + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ETH_PLL_STS 0x40 +#define ETH_PLL_CTL0 0x44 +#define PLL_CTL0_LOCK_DIG BIT(30) +#define PLL_CTL0_RST BIT(29) +#define PLL_CTL0_EN BIT(28) +#define PLL_CTL0_SEL BIT(23) +#define PLL_CTL0_N GENMASK(14, 10) +#define PLL_CTL0_M GENMASK(8, 0) +#define PLL_LOCK_TIMEOUT 1000000 +#define PLL_MUX_NUM_PARENT 2 +#define ETH_PLL_CTL1 0x48 +#define ETH_PLL_CTL2 0x4c +#define ETH_PLL_CTL3 0x50 +#define ETH_PLL_CTL4 0x54 +#define ETH_PLL_CTL5 0x58 +#define ETH_PLL_CTL6 0x5c +#define ETH_PLL_CTL7 0x60 + +#define ETH_PHY_CNTL0 0x80 +#define EPHY_G12A_ID 0x33010180 +#define ETH_PHY_CNTL1 0x84 +#define PHY_CNTL1_ST_MODE GENMASK(2, 0) +#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3) +#define EPHY_DFLT_ADD 8 +#define PHY_CNTL1_MII_MODE GENMASK(15, 14) +#define EPHY_MODE_RMII 0x1 +#define PHY_CNTL1_CLK_EN BIT(16) +#define PHY_CNTL1_CLKFREQ BIT(17) +#define PHY_CNTL1_PHY_ENB BIT(18) +#define ETH_PHY_CNTL2 0x88 +#define PHY_CNTL2_USE_INTERNAL BIT(5) +#define PHY_CNTL2_SMI_SRC_MAC BIT(6) +#define PHY_CNTL2_RX_CLK_EPHY BIT(9) + +#define MESON_G12A_MDIO_EXTERNAL_ID 0 +#define MESON_G12A_MDIO_INTERNAL_ID 1 + +struct g12a_mdio_mux { + void __iomem *regs; + void *mux_handle; + struct clk *pll; +}; + +struct g12a_ephy_pll { + void __iomem *base; + struct clk_hw hw; +}; + +#define g12a_ephy_pll_to_dev(_hw) \ + container_of(_hw, struct g12a_ephy_pll, hw) + +static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val, m, n; + + val = readl(pll->base + ETH_PLL_CTL0); + m = FIELD_GET(PLL_CTL0_M, val); + n = FIELD_GET(PLL_CTL0_N, val); + + return parent_rate * m / n; +} + +static int g12a_ephy_pll_enable(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val = readl(pll->base + ETH_PLL_CTL0); + + /* Apply both enable an reset */ + val |= PLL_CTL0_RST | PLL_CTL0_EN; + writel(val, pll->base + ETH_PLL_CTL0); + + /* Clear the reset to let PLL lock */ + val &= ~PLL_CTL0_RST; + writel(val, pll->base + ETH_PLL_CTL0); + + /* Poll on the digital lock instead of the usual analog lock + * This is done because bit 31 is unreliable on some SoC. Bit + * 31 may indicate that the PLL is not lock even though the clock + * is actually running + */ + return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val, + val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT); +} + +static void g12a_ephy_pll_disable(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + u32 val; + + val = readl(pll->base + ETH_PLL_CTL0); + val &= ~PLL_CTL0_EN; + val |= PLL_CTL0_RST; + writel(val, pll->base + ETH_PLL_CTL0); +} + +static int g12a_ephy_pll_is_enabled(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + unsigned int val; + + val = readl(pll->base + ETH_PLL_CTL0); + + return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0; +} + +static int g12a_ephy_pll_init(struct clk_hw *hw) +{ + struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); + + /* Apply PLL HW settings */ + writel(0x29c0040a, pll->base + ETH_PLL_CTL0); + writel(0x927e0000, pll->base + ETH_PLL_CTL1); + writel(0xac5f49e5, pll->base + ETH_PLL_CTL2); + writel(0x00000000, pll->base + ETH_PLL_CTL3); + writel(0x00000000, pll->base + ETH_PLL_CTL4); + writel(0x20200000, pll->base + ETH_PLL_CTL5); + writel(0x0000c002, pll->base + ETH_PLL_CTL6); + writel(0x00000023, pll->base + ETH_PLL_CTL7); + + return 0; +} + +static const struct clk_ops g12a_ephy_pll_ops = { + .recalc_rate = g12a_ephy_pll_recalc_rate, + .is_enabled = g12a_ephy_pll_is_enabled, + .enable = g12a_ephy_pll_enable, + .disable = g12a_ephy_pll_disable, + .init = g12a_ephy_pll_init, +}; + +static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv) +{ + u32 value; + int ret; + + /* Enable the phy clock */ + if (!__clk_is_enabled(priv->pll)) { + ret = clk_prepare_enable(priv->pll); + if (ret) + return ret; + } + + /* Initialize ephy control */ + writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0); + + /* Make sure we get a 0 -> 1 transition on the enable bit */ + value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) | + FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) | + FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) | + PHY_CNTL1_CLK_EN | + PHY_CNTL1_CLKFREQ; + writel(value, priv->regs + ETH_PHY_CNTL1); + writel(PHY_CNTL2_USE_INTERNAL | + PHY_CNTL2_SMI_SRC_MAC | + PHY_CNTL2_RX_CLK_EPHY, + priv->regs + ETH_PHY_CNTL2); + + value |= PHY_CNTL1_PHY_ENB; + writel(value, priv->regs + ETH_PHY_CNTL1); + + /* The phy needs a bit of time to power up */ + mdelay(10); + + return 0; +} + +static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv) +{ + /* Reset the mdio bus mux */ + writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2); + + /* Disable the phy clock if enabled */ + if (__clk_is_enabled(priv->pll)) + clk_disable_unprepare(priv->pll); + + return 0; +} + +static int g12a_mdio_switch_fn(int current_child, int desired_child, + void *data) +{ + struct g12a_mdio_mux *priv = dev_get_drvdata(data); + + if (current_child == desired_child) + return 0; + + switch (desired_child) { + case MESON_G12A_MDIO_EXTERNAL_ID: + return g12a_enable_external_mdio(priv); + case MESON_G12A_MDIO_INTERNAL_ID: + return g12a_enable_internal_mdio(priv); + default: + return -EINVAL; + } +} + +static const struct of_device_id g12a_mdio_mux_match[] = { + { .compatible = "amlogic,g12a-mdio-mux", }, + {}, +}; +MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match); + +static int g12a_ephy_glue_clk_register(struct device *dev) +{ + struct g12a_mdio_mux *priv = dev_get_drvdata(dev); + const char *parent_names[PLL_MUX_NUM_PARENT]; + struct clk_init_data init; + struct g12a_ephy_pll *pll; + struct clk_mux *mux; + struct clk *clk; + char *name; + int i; + + /* get the mux parents */ + for (i = 0; i < PLL_MUX_NUM_PARENT; i++) { + char in_name[8]; + + snprintf(in_name, sizeof(in_name), "clkin%d", i); + clk = devm_clk_get(dev, in_name); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), + "Missing clock %s\n", in_name); + + parent_names[i] = __clk_get_name(clk); + } + + /* create the input mux */ + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev)); + if (!name) + return -ENOMEM; + + init.name = name; + init.ops = &clk_mux_ro_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = PLL_MUX_NUM_PARENT; + + mux->reg = priv->regs + ETH_PLL_CTL0; + mux->shift = __ffs(PLL_CTL0_SEL); + mux->mask = PLL_CTL0_SEL >> mux->shift; + mux->hw.init = &init; + + clk = devm_clk_register(dev, &mux->hw); + kfree(name); + if (IS_ERR(clk)) { + dev_err(dev, "failed to register input mux\n"); + return PTR_ERR(clk); + } + + /* create the pll */ + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); + if (!pll) + return -ENOMEM; + + name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev)); + if (!name) + return -ENOMEM; + + init.name = name; + init.ops = &g12a_ephy_pll_ops; + init.flags = 0; + parent_names[0] = __clk_get_name(clk); + init.parent_names = parent_names; + init.num_parents = 1; + + pll->base = priv->regs; + pll->hw.init = &init; + + clk = devm_clk_register(dev, &pll->hw); + kfree(name); + if (IS_ERR(clk)) { + dev_err(dev, "failed to register input mux\n"); + return PTR_ERR(clk); + } + + priv->pll = clk; + + return 0; +} + +static int g12a_mdio_mux_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct g12a_mdio_mux *priv; + struct clk *pclk; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + priv->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + pclk = devm_clk_get_enabled(dev, "pclk"); + if (IS_ERR(pclk)) + return dev_err_probe(dev, PTR_ERR(pclk), + "failed to get peripheral clock\n"); + + /* Register PLL in CCF */ + ret = g12a_ephy_glue_clk_register(dev); + if (ret) + return ret; + + ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn, + &priv->mux_handle, dev, NULL); + if (ret) + dev_err_probe(dev, ret, "mdio multiplexer init failed\n"); + + return ret; +} + +static int g12a_mdio_mux_remove(struct platform_device *pdev) +{ + struct g12a_mdio_mux *priv = platform_get_drvdata(pdev); + + mdio_mux_uninit(priv->mux_handle); + + if (__clk_is_enabled(priv->pll)) + clk_disable_unprepare(priv->pll); + + return 0; +} + +static struct platform_driver g12a_mdio_mux_driver = { + .probe = g12a_mdio_mux_probe, + .remove = g12a_mdio_mux_remove, + .driver = { + .name = "g12a-mdio_mux", + .of_match_table = g12a_mdio_mux_match, + }, +}; +module_platform_driver(g12a_mdio_mux_driver); + +MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3